| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
B04PW15-20100-6R103 | BROQUETAS |
 Category: Solder wires - lead freeDescription: Tin; lead free; Sn96Ag4; 1mm; 16g; phial; 221°C; Flux: SW26 Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn96Ag4 Diameter: 1mm Binder weight: 16g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. Melting point: 221°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 56 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
B04PW15-26100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn96Ag4; 1mm; 10g; phial; 221°C; Flux: SW26 Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn96Ag4 Diameter: 1mm Binder weight: 10g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. Melting point: 221°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 39 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09MAC-03CUA-00116 | BROQUETAS |
Category: Solders - other: lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 157g; 217÷227°C; 9x4mm; Flux: SW26 Type of solder: tin Appearance: stick Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 157g Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Profile raster: 9x4mm Conform to the norm: EN ISO 9453 |
на замовлення 235 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09PW15-01070-1V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.1kg; reel; 217÷227°C Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn99Cu0,7Ag0,3 Diameter: 0.7mm Binder weight: 0.1kg Kind of package: reel Kind of flux: halide; No Clean; ROM1; rosin Melting point: 217...227°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes GHS Code: GHS07 Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09PW15-09050-2V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.5mm; 0.25kg; reel; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 0.25kg Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Diameter: 0.5mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 34 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09PW15-09070-2V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.25kg; reel; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 0.25kg Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Diameter: 0.7mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 19 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09PW15-09100-2V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.25kg; reel; 217÷227°C Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn99Cu0,7Ag0,3 Diameter: 1mm Binder weight: 0.25kg Kind of package: reel Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Melting point: 217...227°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
B09PW15-12070-16V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.5kg; reel; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 0.5kg Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Diameter: 0.7mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 24 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B09PW15-12100-16V103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.5kg; reel; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 0.5kg Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Diameter: 1mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
B09PW15-20100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 16g; phial; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 16g Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: phial Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Signal word: Warning Diameter: 1mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 74 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
B09PW15-26100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 10g; phial; 217÷227°C Type of solder: tin Appearance: soldering wire Kind of solder: lead free Alloy composition: Sn99Cu0,7Ag0,3 Binder weight: 10g Melting point: 217...227°C Version: for soft soldering Flux name: SW26 Flux residues: non-corrosive; yes Kind of flux: halide; No Clean; ROM1; rosin Kind of package: phial Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Signal word: Warning Diameter: 1mm Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 433 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B10PW15-20100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 16g; phial; 217÷220°C Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn96,5Ag3Cu0,5 Diameter: 1mm Binder weight: 16g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. Melting point: 217...220°C |
на замовлення 26 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B10PW15-26100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 10g; phial; 217÷220°C Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn96,5Ag3Cu0,5 Diameter: 1mm Binder weight: 10g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 GHS Code: GHS07 Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. Melting point: 217...220°C |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
B12PW15-20100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 16g; phial; 220°C; Flux: SW26 Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn99,3Cu0,7 Diameter: 1mm Binder weight: 16g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Melting point: 220°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 60 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B12PW15-26100-6R103 | BROQUETAS |
Category: Solder wires - lead free Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 10g; phial; 220°C; Flux: SW26 Type of solder: tin Kind of solder: lead free Appearance: soldering wire Alloy composition: Sn99,3Cu0,7 Diameter: 1mm Binder weight: 10g Kind of package: phial Kind of flux: halide; No Clean; ROM1; rosin Melting point: 220°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Flux name: SW26 Version: for soft soldering Flux residues: non-corrosive; yes Signal word: Warning Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. |
на замовлення 27 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21MAC-05CUA-00116 | BROQUETAS |
Category: Solders - other: lead based Description: Tin; lead-based; 183÷190°C; Sn60Pb40; 165÷185g; stick; 9x4mm Type of solder: tin Kind of solder: lead-based Appearance: stick Alloy composition: Sn60Pb40 Binder weight: 165...185g Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Profile raster: 9x4mm Conform to the norm: EN ISO 9453 Applications of soldering equipment: immersion soldering; solder pots; wave soldering |
на замовлення 58 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-01100-1A104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
B21PW15-09050-2A104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.5mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.5mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-09070-2A104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.7mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.7mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 26 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-09090-2A104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.9mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.9mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 44 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-09100-2A104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
B21PW15-12050-16V104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.5mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.5mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 27 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-12070-16V104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.7mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.7mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 35 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-12100-16V104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 21 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-20100-6R104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1mm; 16g; phial; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1mm Binder weight: 16g Kind of package: phial Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 253 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B21PW15-26100-6R104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1mm; 10g; phial; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1mm Binder weight: 10g Kind of package: phial Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B22PW15-20100-6R104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 16g; phial; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 16g Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: phial Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 1mm Flux name: SW26 |
на замовлення 96 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
B22PW15-26100-6R104 | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 10g; phial; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 10g Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: phial Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 1mm Flux name: SW26 |
товару немає в наявності |
Мінімальне замовлення: 2 шт В кошику од. на суму грн. | ||||||
 |
BRFP-260-10 | BROQUETAS |
Category: Fluxes Description: Flux: rosin-free; halide-free,REL0,synthetic; paste; syringe Type of flux: rosin-free Kind of flux: halide-free; REL0; synthetic Appearance: paste Kind of package: syringe Capacity: 10ml Signal word: Warning Hazard statements: H315: Causes skin irritation; H319: Causes serious eye irritation Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P363: Wash contaminated clothing before reuse; P411: Store at temperatures not exceeding ...°C/...°F.; P501: Dispose of contents/container to ... GHS Code: GHS07 Colour: yellow Agent features: good wetting and spreading properties; high activity; residues visible under UV light; soldering flux paste can be done with the aid of hot air or soldering irons; suitable for dip tinning; very high thermal stability |
на замовлення 78 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BRO-B004-00015 | BROQUETAS |
Category: Fluxes Description: Flux: rosin-free; liquid; bottle; 15ml; colourless Applications of soldering equipment: industrial; reworking and repairing of circuit boards; wave soldering Signal word: Warning Standard equipment: fine brush Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ... Hazard statements: H317: May cause an allergic skin reaction. Colour: colourless Type of flux: rosin-free Flux residues: transparent; yes Capacity: 15ml Soldering equipment features: can be washed down with water based agents; water based Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble Kind of package: bottle Appearance: liquid GHS Code: GHS07 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
BROFIL 60 B2.1 0.5MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.5mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 32 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 0.7MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.7mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.7mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 20 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 0,8 MM 1000 G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.8mm; 1000g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.8mm Binder weight: 1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 0,8 MM 100 G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.8mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.8mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 49 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 0,8 MM 250 G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.8mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.8mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 0,8 MM 500 G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.8mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.8mm Binder weight: 0.5kg Kind of package: reel Kind of flux: halide; No Clean; ROM1; rosin Melting point: 183...190°C Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Flux name: SW26 Version: for soft soldering Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.2MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 37 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.2MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 2 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.5MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 100g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.5MM 1KG | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1000g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 25 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.5MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 44 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 1.5MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 17 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 2.0MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 22 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 2.0MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
BROFIL 60 B2.1 3.0MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 3mm; 250g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 3mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 16 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 60 B2.1 3.0MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 3mm; 500g; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 3mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 |
на замовлення 21 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.5MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.5mm Flux name: SW26 |
на замовлення 13 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.5MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.5mm Flux name: SW26 |
на замовлення 18 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.5MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.5mm Flux name: SW26 |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.7MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.7mm Flux name: SW26 |
на замовлення 64 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.7MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.7mm Flux name: SW26 |
на замовлення 43 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.7MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.7mm Flux name: SW26 |
на замовлення 12 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.8MM 1000G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 1000g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.8mm Flux name: SW26 |
на замовлення 15 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.8MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.8mm Flux name: SW26 |
на замовлення 16 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.8MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.8mm Flux name: SW26 |
на замовлення 47 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 0.8MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 0.8mm Flux name: SW26 |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 1.0MM 100G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 1mm Flux name: SW26 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
BROFIL 63 B2.1 1.0MM 250G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 1mm Flux name: SW26 |
на замовлення 33 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
BROFIL 63 B2.1 1.0MM 500G | BROQUETAS |
Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 500g; reel; 183°C; 2.5%; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Flux residues: non-corrosive; yes Melting point: 183°C Kind of flux: halide; No Clean; ROM1; rosin Kind of package: reel Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Diameter: 1mm Flux name: SW26 Flux content: 2.5% |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
BTFO-81-1 | BROQUETAS |
Category: Fluxes Description: Flux: rosin based; halide-free,No Clean,ROL0; gel; syringe; 10ml Type of flux: rosin based Kind of flux: halide-free; No Clean; ROL0 Appearance: gel Kind of package: syringe Capacity: 10ml Signal word: Warning Hazard statements: H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ... GHS Code: GHS07 Application: in the electronics industry Colour: yellow Flux residues: non-corrosive; transparent Soldering equipment features: good wettability of solder pads |
на замовлення 101 шт: термін постачання 14-30 дні (днів) |
|
| B04PW15-20100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 16g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 16g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 56 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 459.71 грн |
| 5+ | 415.13 грн |
| 10+ | 388.29 грн |
| B04PW15-26100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 10g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 10g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 39 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 326.04 грн |
| 5+ | 293.53 грн |
| 10+ | 274.24 грн |
| B09MAC-03CUA-00116 |
Виробник: BROQUETAS
Category: Solders - other: lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 157g; 217÷227°C; 9x4mm; Flux: SW26
Type of solder: tin
Appearance: stick
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 157g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453
Category: Solders - other: lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 157g; 217÷227°C; 9x4mm; Flux: SW26
Type of solder: tin
Appearance: stick
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 157g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453
на замовлення 235 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2198.29 грн |
| 5+ | 1906.25 грн |
| 10+ | 1783.81 грн |
| B09PW15-01070-1V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.1kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.1kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1106.37 грн |
| 5+ | 952.71 грн |
| B09PW15-09050-2V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.5mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.5mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.5mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.5mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 34 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2676.07 грн |
| 5+ | 2333.96 грн |
| 10+ | 2183.84 грн |
| B09PW15-09070-2V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 19 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2592.07 грн |
| 5+ | 2275.26 грн |
| 10+ | 2115.07 грн |
| B09PW15-09100-2V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
товару немає в наявності
В кошику
од. на суму грн.
| B09PW15-12070-16V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 24 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 5281.69 грн |
| 5+ | 4606.70 грн |
| 10+ | 4309.82 грн |
| B09PW15-12100-16V103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 5155.24 грн |
| 5+ | 4496.84 грн |
| B09PW15-20100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 16g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 16g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 16g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 16g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 74 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 238.43 грн |
| 5+ | 206.31 грн |
| 10+ | 194.57 грн |
| B09PW15-26100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 10g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 10g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 10g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 10g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 433 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 179.73 грн |
| 5+ | 157.67 грн |
| 10+ | 147.60 грн |
| B10PW15-20100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 16g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 16g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C
на замовлення 26 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 391.97 грн |
| 5+ | 354.75 грн |
| 10+ | 342.17 грн |
| B10PW15-26100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 10g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 10g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 279.98 грн |
| 5+ | 249.92 грн |
| B12PW15-20100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 16g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 16g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 60 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 223.98 грн |
| 5+ | 193.73 грн |
| 10+ | 181.15 грн |
| B12PW15-26100-6R103 |
|
Виробник: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 10g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 10g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
на замовлення 27 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 166.18 грн |
| 5+ | 146.76 грн |
| 10+ | 136.70 грн |
| B21MAC-05CUA-00116 |
|
Виробник: BROQUETAS
Category: Solders - other: lead based
Description: Tin; lead-based; 183÷190°C; Sn60Pb40; 165÷185g; stick; 9x4mm
Type of solder: tin
Kind of solder: lead-based
Appearance: stick
Alloy composition: Sn60Pb40
Binder weight: 165...185g
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453
Applications of soldering equipment: immersion soldering; solder pots; wave soldering
Category: Solders - other: lead based
Description: Tin; lead-based; 183÷190°C; Sn60Pb40; 165÷185g; stick; 9x4mm
Type of solder: tin
Kind of solder: lead-based
Appearance: stick
Alloy composition: Sn60Pb40
Binder weight: 165...185g
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453
Applications of soldering equipment: immersion soldering; solder pots; wave soldering
на замовлення 58 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1183.14 грн |
| 5+ | 1020.64 грн |
| 10+ | 941.80 грн |
| B21PW15-01100-1A104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
товару немає в наявності
В кошику
од. на суму грн.
| B21PW15-09050-2A104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1634.72 грн |
| B21PW15-09070-2A104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 26 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1545.31 грн |
| 5+ | 1365.32 грн |
| 10+ | 1286.49 грн |
| B21PW15-09090-2A104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.9mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.9mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.9mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.9mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 44 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1493.83 грн |
| 5+ | 1304.10 грн |
| 10+ | 1220.23 грн |
| B21PW15-09100-2A104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
товару немає в наявності
В кошику
од. на суму грн.
| B21PW15-12050-16V104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 27 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3333.57 грн |
| 5+ | 2908.44 грн |
| 10+ | 2720.58 грн |
| B21PW15-12070-16V104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 35 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3180.03 грн |
| 5+ | 2774.25 грн |
| 10+ | 2595.62 грн |
| B21PW15-12100-16V104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 21 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3053.59 грн |
| 5+ | 2663.55 грн |
| 10+ | 2491.63 грн |
| B21PW15-20100-6R104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 16g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 16g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 253 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 210.44 грн |
| 5+ | 186.18 грн |
| 10+ | 171.92 грн |
| B21PW15-26100-6R104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 10g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 10g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 171.60 грн |
| B22PW15-20100-6R104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 16g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 16g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 16g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 16g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
на замовлення 96 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 167.08 грн |
| 5+ | 150.12 грн |
| 10+ | 136.70 грн |
| B22PW15-26100-6R104 |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 10g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 10g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 10g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 10g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
товару немає в наявності
Мінімальне замовлення: 2 шт
В кошику
од. на суму грн.
| BRFP-260-10 |
|
Виробник: BROQUETAS
Category: Fluxes
Description: Flux: rosin-free; halide-free,REL0,synthetic; paste; syringe
Type of flux: rosin-free
Kind of flux: halide-free; REL0; synthetic
Appearance: paste
Kind of package: syringe
Capacity: 10ml
Signal word: Warning
Hazard statements: H315: Causes skin irritation; H319: Causes serious eye irritation
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P363: Wash contaminated clothing before reuse; P411: Store at temperatures not exceeding ...°C/...°F.; P501: Dispose of contents/container to ...
GHS Code: GHS07
Colour: yellow
Agent features: good wetting and spreading properties; high activity; residues visible under UV light; soldering flux paste can be done with the aid of hot air or soldering irons; suitable for dip tinning; very high thermal stability
Category: Fluxes
Description: Flux: rosin-free; halide-free,REL0,synthetic; paste; syringe
Type of flux: rosin-free
Kind of flux: halide-free; REL0; synthetic
Appearance: paste
Kind of package: syringe
Capacity: 10ml
Signal word: Warning
Hazard statements: H315: Causes skin irritation; H319: Causes serious eye irritation
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P363: Wash contaminated clothing before reuse; P411: Store at temperatures not exceeding ...°C/...°F.; P501: Dispose of contents/container to ...
GHS Code: GHS07
Colour: yellow
Agent features: good wetting and spreading properties; high activity; residues visible under UV light; soldering flux paste can be done with the aid of hot air or soldering irons; suitable for dip tinning; very high thermal stability
на замовлення 78 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 824.59 грн |
| 5+ | 724.59 грн |
| BRO-B004-00015 |
|
Виробник: BROQUETAS
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 15ml; colourless
Applications of soldering equipment: industrial; reworking and repairing of circuit boards; wave soldering
Signal word: Warning
Standard equipment: fine brush
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Colour: colourless
Type of flux: rosin-free
Flux residues: transparent; yes
Capacity: 15ml
Soldering equipment features: can be washed down with water based agents; water based
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble
Kind of package: bottle
Appearance: liquid
GHS Code: GHS07
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 15ml; colourless
Applications of soldering equipment: industrial; reworking and repairing of circuit boards; wave soldering
Signal word: Warning
Standard equipment: fine brush
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Colour: colourless
Type of flux: rosin-free
Flux residues: transparent; yes
Capacity: 15ml
Soldering equipment features: can be washed down with water based agents; water based
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble
Kind of package: bottle
Appearance: liquid
GHS Code: GHS07
товару немає в наявності
В кошику
од. на суму грн.
| BROFIL 60 B2.1 0.5MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 32 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 714.40 грн |
| 5+ | 623.96 грн |
| 10+ | 583.70 грн |
| BROFIL 60 B2.1 0.7MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 20 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 671.95 грн |
| 5+ | 586.22 грн |
| 10+ | 548.48 грн |
| BROFIL 60 B2.1 0,8 MM 1000 G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 5939.19 грн |
| BROFIL 60 B2.1 0,8 MM 100 G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 49 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 671.95 грн |
| 5+ | 586.22 грн |
| 10+ | 548.48 грн |
| BROFIL 60 B2.1 0,8 MM 250 G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1545.31 грн |
| 5+ | 1338.48 грн |
| BROFIL 60 B2.1 0,8 MM 500 G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.5kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 183...190°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.5kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 183...190°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3180.03 грн |
| BROFIL 60 B2.1 1.2MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 37 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 630.41 грн |
| 5+ | 550.15 грн |
| 10+ | 514.93 грн |
| BROFIL 60 B2.1 1.2MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 2 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1538.99 грн |
| BROFIL 60 B2.1 1.5MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 615.96 грн |
| BROFIL 60 B2.1 1.5MM 1KG |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 25 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 5659.21 грн |
| 5+ | 4936.29 грн |
| 10+ | 4618.44 грн |
| BROFIL 60 B2.1 1.5MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 44 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1464.93 грн |
| 5+ | 1278.94 грн |
| 10+ | 1180.82 грн |
| BROFIL 60 B2.1 1.5MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 17 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2997.59 грн |
| 5+ | 2614.91 грн |
| 10+ | 2446.34 грн |
| BROFIL 60 B2.1 2.0MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 22 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1428.80 грн |
| 5+ | 1254.62 грн |
| 10+ | 1158.17 грн |
| BROFIL 60 B2.1 2.0MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 2mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 2mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 2mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 2mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
товару немає в наявності
В кошику
од. на суму грн.
| BROFIL 60 B2.1 3.0MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 3mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 3mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 3mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 3mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 16 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1454.99 грн |
| 5+ | 1262.17 грн |
| 10+ | 1158.17 грн |
| BROFIL 60 B2.1 3.0MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 3mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 3mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 3mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 3mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
на замовлення 21 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2956.05 грн |
| 5+ | 2578.85 грн |
| 10+ | 2411.96 грн |
| BROFIL 63 B2.1 0.5MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
на замовлення 13 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 742.40 грн |
| 5+ | 648.28 грн |
| 10+ | 606.34 грн |
| BROFIL 63 B2.1 0.5MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
на замовлення 18 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1690.72 грн |
| 5+ | 1476.02 грн |
| 10+ | 1372.03 грн |
| BROFIL 63 B2.1 0.5MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.5mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.5mm
Flux name: SW26
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3445.56 грн |
| 5+ | 3005.72 грн |
| BROFIL 63 B2.1 0.7MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
на замовлення 64 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 686.40 грн |
| 5+ | 598.80 грн |
| 10+ | 560.22 грн |
| BROFIL 63 B2.1 0.7MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
на замовлення 43 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1605.82 грн |
| 5+ | 1411.45 грн |
| 10+ | 1303.26 грн |
| BROFIL 63 B2.1 0.7MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.7mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.7mm
Flux name: SW26
на замовлення 12 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3292.02 грн |
| 5+ | 2871.54 грн |
| 10+ | 2687.03 грн |
| BROFIL 63 B2.1 0.8MM 1000G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 1000g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 1kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 1000g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 1kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
на замовлення 15 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 6149.62 грн |
| 5+ | 5364.84 грн |
| 10+ | 5018.48 грн |
| BROFIL 63 B2.1 0.8MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
на замовлення 16 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 686.40 грн |
| 5+ | 598.80 грн |
| 10+ | 560.22 грн |
| BROFIL 63 B2.1 0.8MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
на замовлення 47 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1605.82 грн |
| 5+ | 1411.45 грн |
| 10+ | 1311.65 грн |
| BROFIL 63 B2.1 0.8MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 0.8mm; 500g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 0.8mm
Flux name: SW26
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3292.02 грн |
| BROFIL 63 B2.1 1.0MM 100G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 100g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.1kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
товару немає в наявності
В кошику
од. на суму грн.
| BROFIL 63 B2.1 1.0MM 250G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 250g; reel; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.25kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
на замовлення 33 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1592.27 грн |
| 5+ | 1356.93 грн |
| 10+ | 1259.65 грн |
| BROFIL 63 B2.1 1.0MM 500G |
|
Виробник: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 500g; reel; 183°C; 2.5%; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Flux content: 2.5%
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 500g; reel; 183°C; 2.5%; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 0.5kg
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26
Flux content: 2.5%
товару немає в наявності
В кошику
од. на суму грн.
| BTFO-81-1 |
|
Виробник: BROQUETAS
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; gel; syringe; 10ml
Type of flux: rosin based
Kind of flux: halide-free; No Clean; ROL0
Appearance: gel
Kind of package: syringe
Capacity: 10ml
Signal word: Warning
Hazard statements: H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Application: in the electronics industry
Colour: yellow
Flux residues: non-corrosive; transparent
Soldering equipment features: good wettability of solder pads
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; gel; syringe; 10ml
Type of flux: rosin based
Kind of flux: halide-free; No Clean; ROL0
Appearance: gel
Kind of package: syringe
Capacity: 10ml
Signal word: Warning
Hazard statements: H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Application: in the electronics industry
Colour: yellow
Flux residues: non-corrosive; transparent
Soldering equipment features: good wettability of solder pads
на замовлення 101 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 438.03 грн |
| 5+ | 384.94 грн |