Продукція > ELESA+GANTER > Всі товари виробника ELESA+GANTER (7212) > Сторінка 112 з 121
| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
GN 927.4-63-M6-35-B-S | ELESA+GANTER |
 Category: Clamping LeversDescription: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: silver Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: without regulation Thread length: 35mm Lever length: 63mm Body colour: silver |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 927.4-63-M6-35-B-R | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: red Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: without regulation Thread length: 35mm Lever length: 63mm Body colour: red |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 927.4-82-M6-35-A-S | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: silver Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: with regulation Thread length: 35mm Lever length: 82mm Body colour: silver |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 927.4-82-M6-35-A-R | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: with regulation Thread length: 35mm Lever length: 82mm Body colour: red |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 927.4-82-M6-35-A-O | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: orange Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: with regulation Thread length: 35mm Lever length: 82mm Body colour: orange |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 927.4-82-M6-35-B-R | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red Kind of toggle: clamping Type of mounting element: lever Manufacturer series: GN 927.4 External thread: M6 Handle material: zinc die-cast Version: without regulation Thread length: 35mm Lever length: 82mm Body colour: red |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 113.9-16-60 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 16mm Working part length: 60mm Shearing force: 155kN Knob diameter: 38mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 113.4-12-40 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 12mm Working part length: 40mm Shearing force: 144kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 113.10-25-100 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 25mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 25mm Working part length: 100mm Shearing force: 631kN Knob diameter: 50mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
| GN 115.10-SC-30-2-SR | ELESA+GANTER |
Category: Latches Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm Type of mounting element: lock Version: left; with gripping tray Closing lever operation depth: 30mm Kind of insert bolt: cylindrical Colour: silver Mounting hole diameter: 121x76mm Kit contents: key x2 Information: lock with one combination, all locks have the same combination and can be opened with the same key |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
|
|
GN 113.4-16-45 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 16mm Working part length: 45mm Shearing force: 257kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
GN 101.1-18-M8-50-SW | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 50mm; Lever length: 62mm; GN101.1 Type of mounting element: lever Kind of toggle: adjustable Thread length: 50mm Lever length: 62mm Knob height: 45mm Handle material: zinc die-cast Body colour: black Manufacturer series: GN101.1 External thread: M8 Plunger material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
| GN 101.1-30-M16-32-OS | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 32mm; Lever length: 108mm; GN101.1 Type of mounting element: lever Kind of toggle: adjustable Thread length: 32mm Lever length: 108mm Knob height: 76mm Handle material: zinc die-cast Body colour: orange Manufacturer series: GN101.1 External thread: M16 Plunger material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
222261-C4 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M10; 30mm; technopolymer PA; Cap: yellow Type of mounting element: knob Diameter: 45mm External thread: M10 Thread length: 30mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: yellow Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 113.4-10-100 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 10mm Working part length: 100mm Shearing force: 100kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
DVA.1-25-20-M6-18-55 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm Thread: M6 Body material: rubber Plunger material: steel Type of mounting element: vibration damper Diameter: 25mm Thread length: 18mm Spacer length: 20mm Stiffness: 120N/mm Shore hardness: 55±5 Static load: 602N |
на замовлення 40 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
DVA.1-25-15-M6-18-55 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibration damper; M6; Ø: 25mm; rubber; L: 15mm; Thread len: 18mm Thread: M6 Body material: rubber Plunger material: steel Type of mounting element: vibration damper Diameter: 25mm Thread length: 18mm Spacer length: 15mm Stiffness: 183N/mm Shore hardness: 55±5 Static load: 687N |
на замовлення 36 шт: термін постачання 21-30 дні (днів) |
|
||||||
|
|
GN 113.10-16-150 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 16mm Working part length: 150mm Shearing force: 257kN Knob diameter: 38mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
260262-C4 | ELESA+GANTER |
Category: Handles Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN Type of mounting element: holder Material: polypropylene Colour: black Height: 39mm Length: 144mm Cap colour: yellow Width: 26mm Mounting: mounting hole without thread F2 Force: 1kN F1 Force: 1kN Panel cutout diameter: 8mm Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 113.9-6-50 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 6mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 6mm Working part length: 50mm Shearing force: 21kN Knob diameter: 23mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
DIN179-B8-10-A-NI | ELESA+GANTER |
Category: Indexing plungers Description: Guide bushing; stainless steel; Øout: 12mm; Øint: 8mm; DIN 179 Type of mounting element: guide bushing Material: stainless steel Outside diameter: 12mm Internal diameter: 8mm DIN standard: DIN 179 Length: 10mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 113.10-8-70 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 8mm Working part length: 70mm Shearing force: 63kN Knob diameter: 27mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
| GN 101.1-30-M16-50-OS | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 50mm; Lever length: 108mm; GN101.1 Type of mounting element: lever Kind of toggle: adjustable Thread length: 50mm Lever length: 108mm Knob height: 76mm Handle material: zinc die-cast Body colour: orange Manufacturer series: GN101.1 External thread: M16 Plunger material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
260256-C5 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PA; black; H: 42mm; L: 159mm; W: 27mm; F2: 1.8kN Type of mounting element: holder Material: technopolymer PA Colour: black Height: 42mm Length: 159mm Cap colour: blue Width: 27mm Mounting: screwed fole F2 Force: 1.8kN F1 Force: 2.7kN Thread length: 13mm Internal thread: M8 Boss material: brass Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
260230-C3 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PA; black; H: 40.5mm; L: 147mm; W: 27mm; handle Type of mounting element: holder Material: technopolymer PA Colour: black Height: 40.5mm Length: 147mm Cap colour: grey Width: 27mm Mounting: mounting hole without thread F2 Force: 1.8kN F1 Force: 2.7kN Panel cutout diameter: 6.5mm Manufacturer series: ERGOSTYLE® Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
DIN 172-B11,1-12-A | ELESA+GANTER |
Category: Indexing plungers Description: Guide bushing; hardened steel; Øout: 18mm; Øint: 11.1mm; DIN 172 Type of mounting element: guide bushing Material: hardened steel Outside diameter: 18mm Internal diameter: 11.1mm Flange diameter: 22mm DIN standard: DIN 172 Length: 12mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 113.10-10-120 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 10mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 10mm Working part length: 112mm Shearing force: 100kN Knob diameter: 27mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
ERX.30 B-M4-C4 | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 10mm; Lever length: 30mm; -30÷130°C Type of mounting element: lever Kind of toggle: adjustable Thread length: 10mm Lever length: 30mm Knob height: 30mm Handle material: polyamide Body colour: black Manufacturer series: ERGOSTYLE® Actuator colour: yellow Internal thread: M4 Overall length: 37.5mm Resistance to: most of lubricants; most of oils; most of solvents Operating temperature: -30...130°C Internal parts material: brass |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
TLI.Z-13.5/90 | ELESA+GANTER |
Category: Clasps and Latches Description: Clasp; steel; Plating: zinc; W: 17mm; L: 90mm; 900N Body material: steel Plating material: zinc Width: 17mm Length: 90mm Holding force: 900N Type of mounting element: clasp |
на замовлення 200 шт: термін постачання 21-30 дні (днів) |
|
||||||
| GN 967-45-45-L-1-SW | ELESA+GANTER |
Category: Accessories for Profiles Description: Angle bracket; for profiles; with bore for countersunk screws Type of mounting element: angle bracket Application: for profiles Version: with bore for countersunk screws Width: 45mm Height: 45mm Length: 45mm Material: steel Profile raster: 45mm Colour: black Mounting holes pitch: 45mm Manufacturer series: GN967 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
DIN 7603-AL-22-27-A | ELESA+GANTER |
Category: Seals Description: Gasket; aluminium; Thk: 1.5mm; Øint: 22mm; Øout: 27mm; DIN 7603 Type of mounting element: gasket Gasket material: aluminium Thickness: 1.5mm Internal diameter: 22mm Outside diameter: 27mm DIN standard: DIN 7603 |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 927.4-63-M5-40-B-O | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm; Body: orange Type of mounting element: lever Kind of toggle: clamping Thread length: 40mm Lever length: 63mm Handle material: zinc die-cast Body colour: orange Manufacturer series: GN 927.4 External thread: M5 Version: without regulation |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
|
|
GN 113.10-12-25 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 12mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 12mm Working part length: 25mm Shearing force: 144kN Knob diameter: 31mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 +1 |
GN 438.5-25-16-4-A-70 | ELESA+GANTER |
Category: Feet Description: Washer; Base dia: 25mm; stainless steel; H: 16mm; Plating: rubber Type of mounting element: washer Base diameter: 25mm Body material: stainless steel Height: 16mm Plating material: rubber Shore hardness: 70 Mounting: screw Hole diameter: 4mm |
на замовлення 5 шт: термін постачання 21-30 дні (днів) |
|
||||||
| GN 42-80-M12-125-A3-S | ELESA+GANTER |
Category: Feet Description: Foot; Base dia: 80mm; M12; steel; Plunger length: 125mm Type of mounting element: foot Thread: M12 Body material: steel Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation Plating material: zinc Base diameter: 80mm Plunger length: 125mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| GN 115.10-SU-40-1-SR | ELESA+GANTER |
Category: Latches Description: Lock; right,with gripping tray; Clos.lever operation dp: 40mm Type of mounting element: lock Version: right; with gripping tray Closing lever operation depth: 40mm Kind of insert bolt: cylindrical Colour: silver Mounting hole diameter: 121x76mm Kit contents: key x2 Information: lock with 400 different combinations, each lock has a couple of keys with different combination |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| AVM-50-50 | ELESA+GANTER |
Category: Vibration Dampers Description: Spring vibration damper; steel; H: 62mm; Base dim: 55x105mm Type of mounting element: spring vibration damper Body material: steel H dimension: 62mm Base dimensions: 55x105mm Maksimum spring compression: 15mm Load: 180...500N |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
MBT.40 B-6-C5 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 39.5mm; H: 24mm; technopolymer PP; Ømount.hole: 6mm; MBT-B Type of mounting element: knob Diameter: 39.5mm Height: 24mm Body material: technopolymer PP Panel cutout diameter: 6mm Body colour: black Cap colour: blue Version: knurled Boss material: brass Mounting: mounting hole without thread Manufacturer series: MBT-B |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
ERX.44 P-M6X40-C2 | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C Type of mounting element: lever Kind of toggle: adjustable Thread length: 40mm Lever length: 44mm Knob height: 32.5mm Handle material: technopolymer PA Body colour: black Manufacturer series: ERGOSTYLE® External thread: M6 Plunger material: steel Actuator colour: orange Overall length: 52mm Resistance to: most of lubricants; most of oils; most of solvents Operating temperature: -30...130°C |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
 |
141511 | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 20mm; Lever length: 73mm Type of mounting element: lever External thread: M8 Thread length: 20mm Body colour: black Tip material: steel Knob height: 43mm Lever length: 73mm Handle material: technopolymer PA Kind of toggle: adjustable |
на замовлення 43 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
ERX.63 P-M8X20-C1 | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 20mm; Lever length: 63mm; -30÷130°C Type of mounting element: lever External thread: M8 Thread length: 20mm Plunger material: steel Body colour: black Resistance to: most of lubricants; most of oils; most of solvents Operating temperature: -30...130°C Knob height: 43mm Lever length: 63mm Overall length: 72.5mm Handle material: technopolymer PA Kind of toggle: adjustable Actuator colour: black Manufacturer series: ERGOSTYLE® |
на замовлення 14 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
VCT.32 P-M8X20-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP Type of mounting element: knob Diameter: 32mm External thread: M8 Thread pitch: 1.25 Thread length: 20mm Height: 23mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: grey |
на замовлення 20 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
VCT.32 P-M8X20-C9 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP Type of mounting element: knob Diameter: 32mm External thread: M8 Thread pitch: 1.25 Thread length: 20mm Height: 23mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: black |
на замовлення 10 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
VCT.50 P-M8X20-C4 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP Type of mounting element: knob Diameter: 50mm External thread: M8 Thread pitch: 1.25 Thread length: 20mm Height: 32mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: yellow |
на замовлення 8 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
VCT.40 P-M8X20-C6 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 40mm; Ext.thread: M8; 20mm; H: 27mm; technopolymer PP Type of mounting element: knob Diameter: 40mm External thread: M8 Thread pitch: 1.25 Thread length: 20mm Height: 27mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: red |
на замовлення 9 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
VCT.50 P-M8X20-C6 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP Type of mounting element: knob Diameter: 50mm External thread: M8 Thread pitch: 1.25 Thread length: 20mm Height: 32mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: red |
на замовлення 17 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
222221-C2 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: orange Type of mounting element: knob Diameter: 45mm External thread: M8 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: orange Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
на замовлення 9 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
222221-C1 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: black Type of mounting element: knob Diameter: 45mm External thread: M8 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: black Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
на замовлення 8 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
222221-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: grey Type of mounting element: knob Diameter: 45mm External thread: M8 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: grey Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
на замовлення 6 шт: термін постачання 21-30 дні (днів) |
|
||||||
 |
222221-C6 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: red Type of mounting element: knob Diameter: 45mm External thread: M8 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: red Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
на замовлення 4 шт: термін постачання 21-30 дні (днів) |
|
||||||
|
|
222221-C4 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: yellow Type of mounting element: knob Diameter: 45mm External thread: M8 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: yellow Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
на замовлення 2 шт: термін постачання 21-30 дні (днів) |
|
||||||
| GN 581.5-M12 | ELESA+GANTER |
Category: Bolts Description: Lifting eye bolts; twistable; stainless steel; 30mm Type of mounting element: lifting eye bolts Version: twistable Thread: M12 Material: stainless steel Ring inside diameter: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
221636-C6 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 70mm; Int.thread: M12; 17mm; H: 35mm; technopolymer PA Type of mounting element: knob Diameter: 70mm Internal thread: M12 Thread length: 17mm Height: 35mm Body material: technopolymer PA Body colour: black Cap colour: red Boss material: brass Mounting: screwed fole Manufacturer series: ERGOSTYLE® |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
| DVA.5-200-100-SST-M20-55 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibroisolation foot; Ø: 200mm; Shore hardness: 55±5; H: 100mm Type of mounting element: vibroisolation foot Diameter: 200mm Shore hardness: 55±5 Height: 100mm Foot material: rubber Internal thread: M20 Boss material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| GN 487-B20-A-M8-S-1-EL | ELESA+GANTER |
Category: Holders for Sensors Description: Mounting coupler; aluminium; Ext.thread: M8; 20mm; Body: natural Type of mounting element: mounting coupler Version: clamping with adjustable hand lever; with axial bore; with ball joint; with stud bolt Material: aluminium External thread: M8 D dimension: 20mm Body colour: natural |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
MBT.40 P-M6X10-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP Type of mounting element: knob Diameter: 39.5mm External thread: M6 Thread length: 10mm Height: 26.5mm Body material: technopolymer PP Plunger material: steel Body colour: black Cap colour: grey Manufacturer series: MBT-P |
товару немає в наявності |
В кошику од. на суму грн. | ||||||
| ERX.44 P-M6X40-C5 | ELESA+GANTER |
Category: Clamping Levers Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C Type of mounting element: lever Kind of toggle: adjustable Thread length: 40mm Lever length: 44mm Knob height: 32.5mm Handle material: technopolymer PA Body colour: black Manufacturer series: ERGOSTYLE® External thread: M6 Plunger material: steel Actuator colour: blue Overall length: 52mm Resistance to: most of lubricants; most of oils; most of solvents Operating temperature: -30...130°C |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| GN 50.3-ND-10-M3 | ELESA+GANTER |
Category: Magnets Description: Magnet: permanent; neodymium; 25N; Ø: 10mm; H: 4.5mm; steel; steel Type of magnet: permanent Magnetic material: neodymium Force: 25N Diameter: 10mm Height: 4.5mm Enclosure material: steel Plunger length: 7mm External thread: M3 Plunger material: steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| GN 42-80-M20-150-A1-U | ELESA+GANTER |
Category: Feet Description: Foot; Base dia: 80mm; M20; steel; Plunger length: 150mm Type of mounting element: foot Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation Base diameter: 80mm Thread: M20 Body material: steel Plunger length: 150mm Plating material: zinc |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
GN 817-12-15-G | ELESA+GANTER |
Category: Indexing plungers Description: Indexing plungers; Thread: M20; Plating: black finish; 12mm; steel Type of mounting element: indexing plungers Thread: M20 Plating material: black finish Plunger diameter: 12mm Body material: steel Plunger material: hardened steel Version: without knob Thread pitch: 1.5 |
товару немає в наявності |
В кошику од. на суму грн. |
| GN 927.4-63-M6-35-B-S |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: silver
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 63mm
Body colour: silver
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: silver
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 63mm
Body colour: silver
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-63-M6-35-B-R |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 63mm
Body colour: red
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 63mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 63mm
Body colour: red
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-82-M6-35-A-S |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: silver
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: silver
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: silver
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: silver
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-82-M6-35-A-R |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: red
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: red
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-82-M6-35-A-O |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: orange
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: orange
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: orange
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: with regulation
Thread length: 35mm
Lever length: 82mm
Body colour: orange
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-82-M6-35-B-R |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 82mm
Body colour: red
Category: Clamping Levers
Description: Lever; clamping; Thread len: 35mm; Lever length: 82mm; Body: red
Kind of toggle: clamping
Type of mounting element: lever
Manufacturer series: GN 927.4
External thread: M6
Handle material: zinc die-cast
Version: without regulation
Thread length: 35mm
Lever length: 82mm
Body colour: red
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.9-16-60 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 60mm
Shearing force: 155kN
Knob diameter: 38mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 60mm
Shearing force: 155kN
Knob diameter: 38mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.4-12-40 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 12mm
Working part length: 40mm
Shearing force: 144kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 12mm
Working part length: 40mm
Shearing force: 144kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.10-25-100 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 25mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 25mm
Working part length: 100mm
Shearing force: 631kN
Knob diameter: 50mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 25mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 25mm
Working part length: 100mm
Shearing force: 631kN
Knob diameter: 50mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-SC-30-2-SR |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 30mm
Kind of insert bolt: cylindrical
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
Information: lock with one combination, all locks have the same combination and can be opened with the same key
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 30mm
Kind of insert bolt: cylindrical
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
Information: lock with one combination, all locks have the same combination and can be opened with the same key
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.4-16-45 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 45mm
Shearing force: 257kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 45mm
Shearing force: 257kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 101.1-18-M8-50-SW |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 62mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 50mm
Lever length: 62mm
Knob height: 45mm
Handle material: zinc die-cast
Body colour: black
Manufacturer series: GN101.1
External thread: M8
Plunger material: stainless steel
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 62mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 50mm
Lever length: 62mm
Knob height: 45mm
Handle material: zinc die-cast
Body colour: black
Manufacturer series: GN101.1
External thread: M8
Plunger material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| GN 101.1-30-M16-32-OS |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 32mm; Lever length: 108mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 32mm
Lever length: 108mm
Knob height: 76mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN101.1
External thread: M16
Plunger material: stainless steel
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 32mm; Lever length: 108mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 32mm
Lever length: 108mm
Knob height: 76mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN101.1
External thread: M16
Plunger material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| 222261-C4 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M10; 30mm; technopolymer PA; Cap: yellow
Type of mounting element: knob
Diameter: 45mm
External thread: M10
Thread length: 30mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M10; 30mm; technopolymer PA; Cap: yellow
Type of mounting element: knob
Diameter: 45mm
External thread: M10
Thread length: 30mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.4-10-100 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 100mm
Shearing force: 100kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 100mm
Shearing force: 100kN
товару немає в наявності
В кошику
од. на суму грн.
| DVA.1-25-20-M6-18-55 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm
Thread: M6
Body material: rubber
Plunger material: steel
Type of mounting element: vibration damper
Diameter: 25mm
Thread length: 18mm
Spacer length: 20mm
Stiffness: 120N/mm
Shore hardness: 55±5
Static load: 602N
Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm
Thread: M6
Body material: rubber
Plunger material: steel
Type of mounting element: vibration damper
Diameter: 25mm
Thread length: 18mm
Spacer length: 20mm
Stiffness: 120N/mm
Shore hardness: 55±5
Static load: 602N
на замовлення 40 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 5+ | 98.75 грн |
| 10+ | 81.33 грн |
| 20+ | 74.95 грн |
| DVA.1-25-15-M6-18-55 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 15mm; Thread len: 18mm
Thread: M6
Body material: rubber
Plunger material: steel
Type of mounting element: vibration damper
Diameter: 25mm
Thread length: 18mm
Spacer length: 15mm
Stiffness: 183N/mm
Shore hardness: 55±5
Static load: 687N
Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 15mm; Thread len: 18mm
Thread: M6
Body material: rubber
Plunger material: steel
Type of mounting element: vibration damper
Diameter: 25mm
Thread length: 18mm
Spacer length: 15mm
Stiffness: 183N/mm
Shore hardness: 55±5
Static load: 687N
на замовлення 36 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 5+ | 90.17 грн |
| 10+ | 74.16 грн |
| 20+ | 68.58 грн |
| GN 113.10-16-150 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 150mm
Shearing force: 257kN
Knob diameter: 38mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 16mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 16mm
Working part length: 150mm
Shearing force: 257kN
Knob diameter: 38mm
товару немає в наявності
В кошику
од. на суму грн.
| 260262-C4 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: yellow
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: yellow
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.9-6-50 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 6mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 6mm
Working part length: 50mm
Shearing force: 21kN
Knob diameter: 23mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 6mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 6mm
Working part length: 50mm
Shearing force: 21kN
Knob diameter: 23mm
товару немає в наявності
В кошику
од. на суму грн.
| DIN179-B8-10-A-NI |
|
Виробник: ELESA+GANTER
Category: Indexing plungers
Description: Guide bushing; stainless steel; Øout: 12mm; Øint: 8mm; DIN 179
Type of mounting element: guide bushing
Material: stainless steel
Outside diameter: 12mm
Internal diameter: 8mm
DIN standard: DIN 179
Length: 10mm
Category: Indexing plungers
Description: Guide bushing; stainless steel; Øout: 12mm; Øint: 8mm; DIN 179
Type of mounting element: guide bushing
Material: stainless steel
Outside diameter: 12mm
Internal diameter: 8mm
DIN standard: DIN 179
Length: 10mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.10-8-70 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 70mm
Shearing force: 63kN
Knob diameter: 27mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 70mm
Shearing force: 63kN
Knob diameter: 27mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 101.1-30-M16-50-OS |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 108mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 50mm
Lever length: 108mm
Knob height: 76mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN101.1
External thread: M16
Plunger material: stainless steel
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 108mm; GN101.1
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 50mm
Lever length: 108mm
Knob height: 76mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN101.1
External thread: M16
Plunger material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| 260256-C5 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; black; H: 42mm; L: 159mm; W: 27mm; F2: 1.8kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 42mm
Length: 159mm
Cap colour: blue
Width: 27mm
Mounting: screwed fole
F2 Force: 1.8kN
F1 Force: 2.7kN
Thread length: 13mm
Internal thread: M8
Boss material: brass
Trade name: handle
Category: Handles
Description: Holder; technopolymer PA; black; H: 42mm; L: 159mm; W: 27mm; F2: 1.8kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 42mm
Length: 159mm
Cap colour: blue
Width: 27mm
Mounting: screwed fole
F2 Force: 1.8kN
F1 Force: 2.7kN
Thread length: 13mm
Internal thread: M8
Boss material: brass
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| 260230-C3 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; black; H: 40.5mm; L: 147mm; W: 27mm; handle
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 40.5mm
Length: 147mm
Cap colour: grey
Width: 27mm
Mounting: mounting hole without thread
F2 Force: 1.8kN
F1 Force: 2.7kN
Panel cutout diameter: 6.5mm
Manufacturer series: ERGOSTYLE®
Trade name: handle
Category: Handles
Description: Holder; technopolymer PA; black; H: 40.5mm; L: 147mm; W: 27mm; handle
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 40.5mm
Length: 147mm
Cap colour: grey
Width: 27mm
Mounting: mounting hole without thread
F2 Force: 1.8kN
F1 Force: 2.7kN
Panel cutout diameter: 6.5mm
Manufacturer series: ERGOSTYLE®
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| DIN 172-B11,1-12-A |
|
Виробник: ELESA+GANTER
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 18mm; Øint: 11.1mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 18mm
Internal diameter: 11.1mm
Flange diameter: 22mm
DIN standard: DIN 172
Length: 12mm
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 18mm; Øint: 11.1mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 18mm
Internal diameter: 11.1mm
Flange diameter: 22mm
DIN standard: DIN 172
Length: 12mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.10-10-120 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 10mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 112mm
Shearing force: 100kN
Knob diameter: 27mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 10mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 112mm
Shearing force: 100kN
Knob diameter: 27mm
товару немає в наявності
В кошику
од. на суму грн.
| ERX.30 B-M4-C4 |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 10mm; Lever length: 30mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 10mm
Lever length: 30mm
Knob height: 30mm
Handle material: polyamide
Body colour: black
Manufacturer series: ERGOSTYLE®
Actuator colour: yellow
Internal thread: M4
Overall length: 37.5mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Internal parts material: brass
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 10mm; Lever length: 30mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 10mm
Lever length: 30mm
Knob height: 30mm
Handle material: polyamide
Body colour: black
Manufacturer series: ERGOSTYLE®
Actuator colour: yellow
Internal thread: M4
Overall length: 37.5mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Internal parts material: brass
товару немає в наявності
В кошику
од. на суму грн.
| TLI.Z-13.5/90 |
|
Виробник: ELESA+GANTER
Category: Clasps and Latches
Description: Clasp; steel; Plating: zinc; W: 17mm; L: 90mm; 900N
Body material: steel
Plating material: zinc
Width: 17mm
Length: 90mm
Holding force: 900N
Type of mounting element: clasp
Category: Clasps and Latches
Description: Clasp; steel; Plating: zinc; W: 17mm; L: 90mm; 900N
Body material: steel
Plating material: zinc
Width: 17mm
Length: 90mm
Holding force: 900N
Type of mounting element: clasp
на замовлення 200 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 4+ | 128.81 грн |
| 5+ | 98.08 грн |
| GN 967-45-45-L-1-SW |
|
Виробник: ELESA+GANTER
Category: Accessories for Profiles
Description: Angle bracket; for profiles; with bore for countersunk screws
Type of mounting element: angle bracket
Application: for profiles
Version: with bore for countersunk screws
Width: 45mm
Height: 45mm
Length: 45mm
Material: steel
Profile raster: 45mm
Colour: black
Mounting holes pitch: 45mm
Manufacturer series: GN967
Category: Accessories for Profiles
Description: Angle bracket; for profiles; with bore for countersunk screws
Type of mounting element: angle bracket
Application: for profiles
Version: with bore for countersunk screws
Width: 45mm
Height: 45mm
Length: 45mm
Material: steel
Profile raster: 45mm
Colour: black
Mounting holes pitch: 45mm
Manufacturer series: GN967
товару немає в наявності
В кошику
од. на суму грн.
| DIN 7603-AL-22-27-A |
|
Виробник: ELESA+GANTER
Category: Seals
Description: Gasket; aluminium; Thk: 1.5mm; Øint: 22mm; Øout: 27mm; DIN 7603
Type of mounting element: gasket
Gasket material: aluminium
Thickness: 1.5mm
Internal diameter: 22mm
Outside diameter: 27mm
DIN standard: DIN 7603
Category: Seals
Description: Gasket; aluminium; Thk: 1.5mm; Øint: 22mm; Øout: 27mm; DIN 7603
Type of mounting element: gasket
Gasket material: aluminium
Thickness: 1.5mm
Internal diameter: 22mm
Outside diameter: 27mm
DIN standard: DIN 7603
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.4-63-M5-40-B-O |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm; Body: orange
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 40mm
Lever length: 63mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN 927.4
External thread: M5
Version: without regulation
Category: Clamping Levers
Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm; Body: orange
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 40mm
Lever length: 63mm
Handle material: zinc die-cast
Body colour: orange
Manufacturer series: GN 927.4
External thread: M5
Version: without regulation
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.10-12-25 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 12mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 12mm
Working part length: 25mm
Shearing force: 144kN
Knob diameter: 31mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 12mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 12mm
Working part length: 25mm
Shearing force: 144kN
Knob diameter: 31mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 438.5-25-16-4-A-70 |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Washer; Base dia: 25mm; stainless steel; H: 16mm; Plating: rubber
Type of mounting element: washer
Base diameter: 25mm
Body material: stainless steel
Height: 16mm
Plating material: rubber
Shore hardness: 70
Mounting: screw
Hole diameter: 4mm
Category: Feet
Description: Washer; Base dia: 25mm; stainless steel; H: 16mm; Plating: rubber
Type of mounting element: washer
Base diameter: 25mm
Body material: stainless steel
Height: 16mm
Plating material: rubber
Shore hardness: 70
Mounting: screw
Hole diameter: 4mm
на замовлення 5 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 238.72 грн |
| 5+ | 214.50 грн |
| GN 42-80-M12-125-A3-S |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; Base dia: 80mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 80mm
Plunger length: 125mm
Category: Feet
Description: Foot; Base dia: 80mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 80mm
Plunger length: 125mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-SU-40-1-SR |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 40mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 40mm
Kind of insert bolt: cylindrical
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
Information: lock with 400 different combinations, each lock has a couple of keys with different combination
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 40mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 40mm
Kind of insert bolt: cylindrical
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
Information: lock with 400 different combinations, each lock has a couple of keys with different combination
товару немає в наявності
В кошику
од. на суму грн.
| AVM-50-50 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Spring vibration damper; steel; H: 62mm; Base dim: 55x105mm
Type of mounting element: spring vibration damper
Body material: steel
H dimension: 62mm
Base dimensions: 55x105mm
Maksimum spring compression: 15mm
Load: 180...500N
Category: Vibration Dampers
Description: Spring vibration damper; steel; H: 62mm; Base dim: 55x105mm
Type of mounting element: spring vibration damper
Body material: steel
H dimension: 62mm
Base dimensions: 55x105mm
Maksimum spring compression: 15mm
Load: 180...500N
товару немає в наявності
В кошику
од. на суму грн.
| MBT.40 B-6-C5 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 39.5mm; H: 24mm; technopolymer PP; Ømount.hole: 6mm; MBT-B
Type of mounting element: knob
Diameter: 39.5mm
Height: 24mm
Body material: technopolymer PP
Panel cutout diameter: 6mm
Body colour: black
Cap colour: blue
Version: knurled
Boss material: brass
Mounting: mounting hole without thread
Manufacturer series: MBT-B
Category: Knobs
Description: Knob; Ø: 39.5mm; H: 24mm; technopolymer PP; Ømount.hole: 6mm; MBT-B
Type of mounting element: knob
Diameter: 39.5mm
Height: 24mm
Body material: technopolymer PP
Panel cutout diameter: 6mm
Body colour: black
Cap colour: blue
Version: knurled
Boss material: brass
Mounting: mounting hole without thread
Manufacturer series: MBT-B
товару немає в наявності
В кошику
од. на суму грн.
| ERX.44 P-M6X40-C2 |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 40mm
Lever length: 44mm
Knob height: 32.5mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: orange
Overall length: 52mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 40mm
Lever length: 44mm
Knob height: 32.5mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: orange
Overall length: 52mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
товару немає в наявності
В кошику
од. на суму грн.
| 141511 |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 20mm; Lever length: 73mm
Type of mounting element: lever
External thread: M8
Thread length: 20mm
Body colour: black
Tip material: steel
Knob height: 43mm
Lever length: 73mm
Handle material: technopolymer PA
Kind of toggle: adjustable
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 20mm; Lever length: 73mm
Type of mounting element: lever
External thread: M8
Thread length: 20mm
Body colour: black
Tip material: steel
Knob height: 43mm
Lever length: 73mm
Handle material: technopolymer PA
Kind of toggle: adjustable
на замовлення 43 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 314.29 грн |
| 5+ | 241.61 грн |
| 10+ | 225.66 грн |
| ERX.63 P-M8X20-C1 |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 20mm; Lever length: 63mm; -30÷130°C
Type of mounting element: lever
External thread: M8
Thread length: 20mm
Plunger material: steel
Body colour: black
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Knob height: 43mm
Lever length: 63mm
Overall length: 72.5mm
Handle material: technopolymer PA
Kind of toggle: adjustable
Actuator colour: black
Manufacturer series: ERGOSTYLE®
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 20mm; Lever length: 63mm; -30÷130°C
Type of mounting element: lever
External thread: M8
Thread length: 20mm
Plunger material: steel
Body colour: black
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Knob height: 43mm
Lever length: 63mm
Overall length: 72.5mm
Handle material: technopolymer PA
Kind of toggle: adjustable
Actuator colour: black
Manufacturer series: ERGOSTYLE®
на замовлення 14 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 3+ | 209.53 грн |
| 5+ | 172.23 грн |
| 10+ | 149.91 грн |
| VCT.32 P-M8X20-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 23mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 23mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
на замовлення 20 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 4+ | 112.49 грн |
| 10+ | 91.70 грн |
| VCT.32 P-M8X20-C9 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 23mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: black
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; 20mm; H: 23mm; technopolymer PP
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 23mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: black
на замовлення 10 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 4+ | 112.49 грн |
| 10+ | 87.71 грн |
| VCT.50 P-M8X20-C4 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
на замовлення 8 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 3+ | 147.70 грн |
| VCT.40 P-M8X20-C6 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 40mm; Ext.thread: M8; 20mm; H: 27mm; technopolymer PP
Type of mounting element: knob
Diameter: 40mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 27mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Category: Knobs
Description: Knob; Ø: 40mm; Ext.thread: M8; 20mm; H: 27mm; technopolymer PP
Type of mounting element: knob
Diameter: 40mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 27mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
на замовлення 9 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 5+ | 103.91 грн |
| VCT.50 P-M8X20-C6 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M8
Thread pitch: 1.25
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
на замовлення 17 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 3+ | 147.70 грн |
| 10+ | 119.61 грн |
| 222221-C2 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: orange
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: orange
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: orange
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: orange
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
на замовлення 9 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 319.44 грн |
| 222221-C1 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: black
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: black
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: black
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: black
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
на замовлення 8 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 425.93 грн |
| 222221-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: grey
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: grey
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
на замовлення 6 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 319.44 грн |
| 222221-C6 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: red
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: red
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
на замовлення 4 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 319.44 грн |
| 222221-C4 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: yellow
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M8; 20mm; technopolymer PA; Cap: yellow
Type of mounting element: knob
Diameter: 45mm
External thread: M8
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: yellow
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
на замовлення 2 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 319.44 грн |
| GN 581.5-M12 |
|
Виробник: ELESA+GANTER
Category: Bolts
Description: Lifting eye bolts; twistable; stainless steel; 30mm
Type of mounting element: lifting eye bolts
Version: twistable
Thread: M12
Material: stainless steel
Ring inside diameter: 30mm
Category: Bolts
Description: Lifting eye bolts; twistable; stainless steel; 30mm
Type of mounting element: lifting eye bolts
Version: twistable
Thread: M12
Material: stainless steel
Ring inside diameter: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 221636-C6 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 70mm; Int.thread: M12; 17mm; H: 35mm; technopolymer PA
Type of mounting element: knob
Diameter: 70mm
Internal thread: M12
Thread length: 17mm
Height: 35mm
Body material: technopolymer PA
Body colour: black
Cap colour: red
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 70mm; Int.thread: M12; 17mm; H: 35mm; technopolymer PA
Type of mounting element: knob
Diameter: 70mm
Internal thread: M12
Thread length: 17mm
Height: 35mm
Body material: technopolymer PA
Body colour: black
Cap colour: red
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
товару немає в наявності
В кошику
од. на суму грн.
| DVA.5-200-100-SST-M20-55 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 200mm; Shore hardness: 55±5; H: 100mm
Type of mounting element: vibroisolation foot
Diameter: 200mm
Shore hardness: 55±5
Height: 100mm
Foot material: rubber
Internal thread: M20
Boss material: stainless steel
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 200mm; Shore hardness: 55±5; H: 100mm
Type of mounting element: vibroisolation foot
Diameter: 200mm
Shore hardness: 55±5
Height: 100mm
Foot material: rubber
Internal thread: M20
Boss material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| GN 487-B20-A-M8-S-1-EL |
|
Виробник: ELESA+GANTER
Category: Holders for Sensors
Description: Mounting coupler; aluminium; Ext.thread: M8; 20mm; Body: natural
Type of mounting element: mounting coupler
Version: clamping with adjustable hand lever; with axial bore; with ball joint; with stud bolt
Material: aluminium
External thread: M8
D dimension: 20mm
Body colour: natural
Category: Holders for Sensors
Description: Mounting coupler; aluminium; Ext.thread: M8; 20mm; Body: natural
Type of mounting element: mounting coupler
Version: clamping with adjustable hand lever; with axial bore; with ball joint; with stud bolt
Material: aluminium
External thread: M8
D dimension: 20mm
Body colour: natural
товару немає в наявності
В кошику
од. на суму грн.
| MBT.40 P-M6X10-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP
Type of mounting element: knob
Diameter: 39.5mm
External thread: M6
Thread length: 10mm
Height: 26.5mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: grey
Manufacturer series: MBT-P
Category: Knobs
Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP
Type of mounting element: knob
Diameter: 39.5mm
External thread: M6
Thread length: 10mm
Height: 26.5mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: grey
Manufacturer series: MBT-P
товару немає в наявності
В кошику
од. на суму грн.
| ERX.44 P-M6X40-C5 |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 40mm
Lever length: 44mm
Knob height: 32.5mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: blue
Overall length: 52mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 40mm; Lever length: 44mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 40mm
Lever length: 44mm
Knob height: 32.5mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: blue
Overall length: 52mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
товару немає в наявності
В кошику
од. на суму грн.
| GN 50.3-ND-10-M3 |
|
Виробник: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 25N; Ø: 10mm; H: 4.5mm; steel; steel
Type of magnet: permanent
Magnetic material: neodymium
Force: 25N
Diameter: 10mm
Height: 4.5mm
Enclosure material: steel
Plunger length: 7mm
External thread: M3
Plunger material: steel
Category: Magnets
Description: Magnet: permanent; neodymium; 25N; Ø: 10mm; H: 4.5mm; steel; steel
Type of magnet: permanent
Magnetic material: neodymium
Force: 25N
Diameter: 10mm
Height: 4.5mm
Enclosure material: steel
Plunger length: 7mm
External thread: M3
Plunger material: steel
товару немає в наявності
В кошику
од. на суму грн.
| GN 42-80-M20-150-A1-U |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; Base dia: 80mm; M20; steel; Plunger length: 150mm
Type of mounting element: foot
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Base diameter: 80mm
Thread: M20
Body material: steel
Plunger length: 150mm
Plating material: zinc
Category: Feet
Description: Foot; Base dia: 80mm; M20; steel; Plunger length: 150mm
Type of mounting element: foot
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Base diameter: 80mm
Thread: M20
Body material: steel
Plunger length: 150mm
Plating material: zinc
товару немає в наявності
В кошику
од. на суму грн.
| GN 817-12-15-G |
|
Виробник: ELESA+GANTER
Category: Indexing plungers
Description: Indexing plungers; Thread: M20; Plating: black finish; 12mm; steel
Type of mounting element: indexing plungers
Thread: M20
Plating material: black finish
Plunger diameter: 12mm
Body material: steel
Plunger material: hardened steel
Version: without knob
Thread pitch: 1.5
Category: Indexing plungers
Description: Indexing plungers; Thread: M20; Plating: black finish; 12mm; steel
Type of mounting element: indexing plungers
Thread: M20
Plating material: black finish
Plunger diameter: 12mm
Body material: steel
Plunger material: hardened steel
Version: without knob
Thread pitch: 1.5
товару немає в наявності
В кошику
од. на суму грн.