| Фото | Назва | Виробник | Інформація | Доступність | Ціна |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00104031 | GSR |
 Category: Threading Dies and TapsDescription: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; initial Type of tool: tap Thread: M1,2 Thread pitch: 0.25 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: initial Kind of thread: metric; right hand thread Working part length: 5.5mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104032 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; intermediate Type of tool: tap Thread: M1,2 Thread pitch: 0.25 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: intermediate Kind of thread: metric; right hand thread Working part length: 5.5mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104033 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: M1,2 Thread pitch: 0.25 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: finishing Kind of thread: metric; right hand thread Working part length: 5.5mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104041 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; initial Type of tool: tap Thread: M1,4 Thread pitch: 0.3 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: initial Working part length: 7mm Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104042 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; intermediate Type of tool: tap Thread: M1,4 Thread pitch: 0.3 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: intermediate Working part length: 7mm Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104043 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: M1,4 Thread pitch: 0.3 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: finishing Working part length: 7mm Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104072 | GSR |
Category: Threading Dies and Taps Description: Tap; M1,8; 350m; L: 32mm; Holder: square,hand; 2.1mm; intermediate Type of tool: tap Thread: M1,8 Thread pitch: 0.35 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Kind of thread: metric; right hand thread Tools application: for blind holes; to the through holes Version: intermediate Working part length: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104081 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial Type of tool: tap Thread: M2 Thread pitch: 0.4 Length: 36mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Kind of thread: metric; right hand thread Tools application: for blind holes; to the through holes Version: initial Working part length: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104082 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; intermediate Length: 36mm Thread pitch: 0.4 Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Version: intermediate Thread: M2 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 2.1mm Working part length: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104093 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,2; 450m; L: 36mm; Holder: square,hand; 2.1mm; finishing Material: high speed steel grounded HSS-G Kind of holder: hand; square Type of tool: tap Tools application: for blind holes; to the through holes Holder socket size - mm: 2.1mm Working part length: 9mm Length: 36mm Version: finishing Thread pitch: 0.45 Conform to the norm: DIN 352 Thread: M2,2 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104101 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial Tools application: for blind holes; to the through holes Conform to the norm: DIN 352 Type of tool: tap Kind of holder: hand; square Thread: M2,3 Kind of thread: metric; right hand thread Holder socket size - mm: 2.1mm Working part length: 9mm Length: 36mm Thread pitch: 0.4 Version: initial Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104103 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; finishing Kind of holder: hand; square Thread: M2,3 Kind of thread: metric; right hand thread Conform to the norm: DIN 352 Material: high speed steel grounded HSS-G Version: finishing Tools application: for blind holes; to the through holes Type of tool: tap Holder socket size - mm: 2.1mm Working part length: 9mm Length: 36mm Thread pitch: 0.4 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104113 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 40mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 40mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: finishing Working part length: 9mm Kind of thread: metric; right hand thread |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
|||||||
| 00104401 | GSR |
Category: Threading Dies and Taps Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; initial Kind of holder: hand; square Material: high speed steel grounded HSS-G Version: initial Thread: M52 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 32mm Working part length: 70mm Length: 0.18m Thread pitch: 5 Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104402 | GSR |
Category: Threading Dies and Taps Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; intermediate Material: high speed steel grounded HSS-G Version: intermediate Type of tool: tap Holder socket size - mm: 32mm Working part length: 70mm Length: 0.18m Thread pitch: 5 Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M52 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00104403 | GSR |
Category: Threading Dies and Taps Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; finishing Version: finishing Type of tool: tap Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M52 Kind of thread: metric; right hand thread Holder socket size - mm: 32mm Working part length: 70mm Length: 0.18m Thread pitch: 5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00105030 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M1,2; 0.25; L: 32mm; Holder: square,hand; 2.1mm; 3pcs. Type of tool: tap - set Thread: M1,2 Thread pitch: 0.25 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Kind of thread: metric; right hand thread Working part length: 5.5mm Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00105040 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M1,4; 0.3; L: 32mm; Holder: square,hand; 2.1mm; 3pcs. Type of tool: tap - set Thread: M1,4 Thread pitch: 0.3 Length: 32mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Working part length: 7mm Quantity in set/package: 3pcs. Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00105110 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M2,5; 0.45; L: 40mm; Holder: square,hand; 2.1mm; 3pcs. Type of tool: tap - set Thread: M2,5 Thread pitch: 0.45 Length: 40mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Working part length: 9mm Quantity in set/package: 3pcs. Kind of thread: metric; right hand thread |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
|||||||
 |
00105150 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M4; 0.7; L: 45mm; Holder: square,hand; 3.4mm; 3pcs. Type of tool: tap - set Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M4 Kind of thread: metric; right hand thread Holder socket size - mm: 3.4mm Working part length: 13mm Length: 45mm Thread pitch: 0.7 Quantity in set/package: 3pcs. |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00105190 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs. Material: high speed steel grounded HSS-G Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M6 Kind of thread: metric; right hand thread Type of tool: tap - set Holder socket size - mm: 4.9mm Working part length: 19mm Length: 56mm Thread pitch: 1 Quantity in set/package: 3pcs. |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 00105380 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M45; 4.5; L: 160mm; Holder: square,hand; 29mm; 3pcs. Type of tool: tap - set Thread: M45 Thread pitch: 4.5 Length: 160mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 29mm Material: high speed steel grounded HSS-G Kind of thread: metric; right hand thread Tools application: for blind holes; to the through holes Quantity in set/package: 3pcs. Working part length: 65mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00105400 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M52; 5; L: 180mm; Holder: square,hand; 32mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M52 Kind of thread: metric; right hand thread Type of tool: tap - set Length: 0.18m Holder socket size - mm: 32mm Working part length: 70mm Quantity in set/package: 3pcs. Thread pitch: 5 Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106172 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; intermediate Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel cobalt HSS-E Version: intermediate Thread: M5 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 16mm Length: 50mm Thread pitch: 0.8 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106231 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; initial Material: high speed steel cobalt HSS-E Thread: M10 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 25mm Length: 70mm Thread pitch: 1.5 Kind of holder: hand; square Conform to the norm: DIN 352 Version: initial Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106232 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; intermediate Material: high speed steel cobalt HSS-E Thread: M10 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 25mm Length: 70mm Thread pitch: 1.5 Kind of holder: hand; square Conform to the norm: DIN 352 Version: intermediate Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106233 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; finishing Material: high speed steel cobalt HSS-E Thread: M10 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 25mm Length: 70mm Thread pitch: 1.5 Kind of holder: hand; square Conform to the norm: DIN 352 Version: finishing Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106261 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; initial Material: high speed steel cobalt HSS-E Conform to the norm: DIN 352 Kind of thread: metric; right hand thread Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M14 Type of tool: tap Holder socket size - mm: 9mm Working part length: 32mm Length: 80mm Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106262 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; intermediate Material: high speed steel cobalt HSS-E Conform to the norm: DIN 352 Kind of thread: metric; right hand thread Version: intermediate Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M14 Type of tool: tap Holder socket size - mm: 9mm Working part length: 32mm Length: 80mm Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106263 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; finishing Material: high speed steel cobalt HSS-E Conform to the norm: DIN 352 Kind of thread: metric; right hand thread Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M14 Type of tool: tap Holder socket size - mm: 9mm Working part length: 32mm Length: 80mm Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00106292 | GSR |
Category: Threading Dies and Taps Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate Tools application: for blind holes; to the through holes Conform to the norm: DIN 352 Kind of thread: metric; right hand thread Kind of holder: hand; square Material: high speed steel cobalt HSS-E Thread: M20 Type of tool: tap Holder socket size - mm: 12mm Working part length: 34mm Length: 95mm Thread pitch: 2.5 Version: intermediate |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00107170 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; 3pcs. Thread: M5 Kind of thread: metric; right hand thread Type of tool: tap - set Holder socket size - mm: 4.9mm Working part length: 16mm Length: 50mm Thread pitch: 0.8 Quantity in set/package: 3pcs. Material: high speed steel cobalt HSS-E Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00107300 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Material: high speed steel cobalt HSS-E Kind of holder: hand; square Thread: M22 Kind of thread: metric; right hand thread Type of tool: tap - set Length: 0.1m Holder socket size - mm: 14.5mm Working part length: 34mm Thread pitch: 2.5 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00107310 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Material: high speed steel cobalt HSS-E Kind of holder: hand; square Thread: M24 Kind of thread: metric; right hand thread Type of tool: tap - set Length: 0.11m Holder socket size - mm: 14.5mm Working part length: 38mm Thread pitch: 3 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00107320 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M27; 3; L: 110mm; Holder: square,hand; 16mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Material: high speed steel cobalt HSS-E Kind of holder: hand; square Thread: M27 Kind of thread: metric; right hand thread Type of tool: tap - set Length: 0.11m Holder socket size - mm: 16mm Working part length: 38mm Thread pitch: 3 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00107330 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Material: high speed steel cobalt HSS-E Kind of holder: hand; square Thread: M30 Kind of thread: metric; right hand thread Type of tool: tap - set Length: 125mm Holder socket size - mm: 18mm Working part length: 45mm Thread pitch: 3.5 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108271 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 80mm; Holder: square,hand; 9mm; initial Version: initial Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Type of tool: tap Kind of holder: hand; square Kind of thread: left hand thread; metric Thread: M16 Holder socket size - mm: 9mm Length: 80mm Working part length: 32mm Thread pitch: 2 Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108292 | GSR |
Category: Threading Dies and Taps Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate Type of tool: tap Thread: M20 Thread pitch: 2.5 Length: 95mm Conform to the norm: DIN 352 Kind of holder: hand; square Holder socket size - mm: 12mm Material: high speed steel grounded HSS-G Kind of thread: left hand thread; metric Tools application: for blind holes; to the through holes Version: intermediate Working part length: 34mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108301 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; initial Kind of thread: left hand thread; metric Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M22 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 34mm Length: 0.1m Thread pitch: 2.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108302 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; intermediate Kind of thread: left hand thread; metric Version: intermediate Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M22 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 34mm Length: 0.1m Thread pitch: 2.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108303 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; finishing Kind of thread: left hand thread; metric Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M22 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 34mm Length: 0.1m Thread pitch: 2.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108311 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; initial Kind of thread: left hand thread; metric Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M24 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108312 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; intermediate Kind of thread: left hand thread; metric Version: intermediate Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M24 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108313 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; finishing Kind of thread: left hand thread; metric Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M24 Type of tool: tap Holder socket size - mm: 14.5mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108321 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; initial Kind of thread: left hand thread; metric Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M27 Type of tool: tap Holder socket size - mm: 16mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108322 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; intermediate Kind of thread: left hand thread; metric Version: intermediate Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M27 Type of tool: tap Holder socket size - mm: 16mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108323 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; finishing Kind of thread: left hand thread; metric Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M27 Type of tool: tap Holder socket size - mm: 16mm Working part length: 38mm Length: 0.11m Thread pitch: 3 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108331 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; initial Kind of thread: left hand thread; metric Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M30 Type of tool: tap Holder socket size - mm: 18mm Working part length: 45mm Length: 125mm Thread pitch: 3.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108332 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; intermediate Kind of thread: left hand thread; metric Version: intermediate Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M30 Type of tool: tap Holder socket size - mm: 18mm Working part length: 45mm Length: 125mm Thread pitch: 3.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00108333 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; finishing Kind of thread: left hand thread; metric Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M30 Type of tool: tap Holder socket size - mm: 18mm Working part length: 45mm Length: 125mm Thread pitch: 3.5 Conform to the norm: DIN 352 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00109170 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M5; 0.8; L: 48mm; Holder: square,hand; 4.9mm; 3pcs. Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: left hand thread; metric Thread: M5 Type of tool: tap - set Holder socket size - mm: 4.9mm Working part length: 16mm Length: 48mm Thread pitch: 0.8 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00109190 | GSR |
Category: Threading Dies and Taps Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs. Material: high speed steel grounded HSS-G Conform to the norm: DIN 352 Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: left hand thread; metric Thread: M6 Type of tool: tap - set Holder socket size - mm: 4.9mm Working part length: 19mm Length: 56mm Thread pitch: 1 Quantity in set/package: 3pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114401 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1; L: 63mm; Holder: square,hand; 4.9mm; initial Material: high speed steel grounded HSS-G Version: initial Kind of thread: fine thread; metric; right hand thread Kind of holder: hand; square Thread: M8 Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 22mm Length: 63mm Thread pitch: 1 Tools application: for blind holes; to the through holes Conform to the norm: DIN 2181 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114413 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.5; L: 63mm; Holder: square,hand; 4.9mm; finishing Type of tool: tap Thread: M8 Thread pitch: 1.5 Length: 63mm Conform to the norm: DIN 2181 Kind of holder: hand; square Holder socket size - mm: 4.9mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; metric; right hand thread Tools application: for blind holes; to the through holes Version: finishing Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114423 | GSR |
Category: Threading Dies and Taps Description: Tap; M9; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing Type of tool: tap Thread: M9 Thread pitch: 0.5 Length: 63mm Conform to the norm: DIN 2181 Kind of holder: hand; square Holder socket size - mm: 5.5mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; metric; right hand thread Tools application: for blind holes; to the through holes Version: finishing Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114451 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; initial Conform to the norm: DIN 2181 Kind of thread: fine thread; metric; right hand thread Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M10 Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 20mm Length: 63mm Thread pitch: 0.5 Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114453 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing Conform to the norm: DIN 2181 Kind of thread: fine thread; metric; right hand thread Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: M10 Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 20mm Length: 63mm Thread pitch: 0.5 Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114471 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1; L: 63mm; Holder: square,hand; 5.5mm; initial Thread: M10 Version: initial Tools application: for blind holes; to the through holes Kind of thread: fine thread; metric; right hand thread Type of tool: tap Holder socket size - mm: 5.5mm Working part length: 20mm Length: 63mm Thread pitch: 1 Conform to the norm: DIN 2181 Kind of holder: hand; square Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114603 | GSR |
Category: Threading Dies and Taps Description: Tap; M13; 1; L: 70mm; Holder: square,hand; 9mm; finishing Material: high speed steel grounded HSS-G Version: finishing Thread: M13 Kind of holder: hand; square Type of tool: tap Tools application: for blind holes; to the through holes Kind of thread: fine thread; metric; right hand thread Holder socket size - mm: 9mm Working part length: 22mm Conform to the norm: DIN 2181 Length: 70mm Thread pitch: 1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00114613 | GSR |
Category: Threading Dies and Taps Description: Tap; M13; 1.25; L: 70mm; Holder: square,hand; 9mm; finishing Type of tool: tap Length: 70mm Conform to the norm: DIN 2181 Holder socket size - mm: 9mm Tools application: for blind holes; to the through holes Kind of thread: fine thread; metric; right hand thread Version: finishing Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: M13 Working part length: 22mm Thread pitch: 1.25 |
товару немає в наявності |
В кошику од. на суму грн. |
| 00104031 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Kind of thread: metric; right hand thread
Working part length: 5.5mm
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Kind of thread: metric; right hand thread
Working part length: 5.5mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104032 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: intermediate
Kind of thread: metric; right hand thread
Working part length: 5.5mm
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: intermediate
Kind of thread: metric; right hand thread
Working part length: 5.5mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104033 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Kind of thread: metric; right hand thread
Working part length: 5.5mm
Category: Threading Dies and Taps
Description: Tap; M1,2; 250m; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Kind of thread: metric; right hand thread
Working part length: 5.5mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104041 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 7mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 7mm
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00104042 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 7mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 7mm
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00104043 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 7mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M1,4; 300m; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 7mm
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00104072 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M1,8; 350m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,8
Thread pitch: 0.35
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M1,8; 350m; L: 32mm; Holder: square,hand; 2.1mm; intermediate
Type of tool: tap
Thread: M1,8
Thread pitch: 0.35
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104081 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M2
Thread pitch: 0.4
Length: 36mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: M2
Thread pitch: 0.4
Length: 36mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104082 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; intermediate
Length: 36mm
Thread pitch: 0.4
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Version: intermediate
Thread: M2
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 2.1mm
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 36mm; Holder: square,hand; 2.1mm; intermediate
Length: 36mm
Thread pitch: 0.4
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Version: intermediate
Thread: M2
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 2.1mm
Working part length: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00104093 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,2; 450m; L: 36mm; Holder: square,hand; 2.1mm; finishing
Material: high speed steel grounded HSS-G
Kind of holder: hand; square
Type of tool: tap
Tools application: for blind holes; to the through holes
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Version: finishing
Thread pitch: 0.45
Conform to the norm: DIN 352
Thread: M2,2
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2,2; 450m; L: 36mm; Holder: square,hand; 2.1mm; finishing
Material: high speed steel grounded HSS-G
Kind of holder: hand; square
Type of tool: tap
Tools application: for blind holes; to the through holes
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Version: finishing
Thread pitch: 0.45
Conform to the norm: DIN 352
Thread: M2,2
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00104101 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 352
Type of tool: tap
Kind of holder: hand; square
Thread: M2,3
Kind of thread: metric; right hand thread
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 0.4
Version: initial
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; initial
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 352
Type of tool: tap
Kind of holder: hand; square
Thread: M2,3
Kind of thread: metric; right hand thread
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 0.4
Version: initial
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00104103 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; finishing
Kind of holder: hand; square
Thread: M2,3
Kind of thread: metric; right hand thread
Conform to the norm: DIN 352
Material: high speed steel grounded HSS-G
Version: finishing
Tools application: for blind holes; to the through holes
Type of tool: tap
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 0.4
Category: Threading Dies and Taps
Description: Tap; M2,3; 400m; L: 36mm; Holder: square,hand; 2.1mm; finishing
Kind of holder: hand; square
Thread: M2,3
Kind of thread: metric; right hand thread
Conform to the norm: DIN 352
Material: high speed steel grounded HSS-G
Version: finishing
Tools application: for blind holes; to the through holes
Type of tool: tap
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 0.4
товару немає в наявності
В кошику
од. на суму грн.
| 00104113 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 9mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 9mm
Kind of thread: metric; right hand thread
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 452.59 грн |
| 00104401 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; initial
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Version: initial
Thread: M52
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; initial
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Version: initial
Thread: M52
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00104402 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; intermediate
Material: high speed steel grounded HSS-G
Version: intermediate
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M52
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; intermediate
Material: high speed steel grounded HSS-G
Version: intermediate
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M52
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00104403 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; finishing
Version: finishing
Type of tool: tap
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M52
Kind of thread: metric; right hand thread
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
Category: Threading Dies and Taps
Description: Tap; M52; 5; L: 180mm; Holder: square,hand; 32mm; finishing
Version: finishing
Type of tool: tap
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M52
Kind of thread: metric; right hand thread
Holder socket size - mm: 32mm
Working part length: 70mm
Length: 0.18m
Thread pitch: 5
товару немає в наявності
В кошику
од. на суму грн.
| 00105030 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M1,2; 0.25; L: 32mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Kind of thread: metric; right hand thread
Working part length: 5.5mm
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M1,2; 0.25; L: 32mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Kind of thread: metric; right hand thread
Working part length: 5.5mm
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00105040 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M1,4; 0.3; L: 32mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Working part length: 7mm
Quantity in set/package: 3pcs.
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap-set; M1,4; 0.3; L: 32mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M1,4
Thread pitch: 0.3
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Working part length: 7mm
Quantity in set/package: 3pcs.
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 00105110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M2,5; 0.45; L: 40mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Working part length: 9mm
Quantity in set/package: 3pcs.
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap-set; M2,5; 0.45; L: 40mm; Holder: square,hand; 2.1mm; 3pcs.
Type of tool: tap - set
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Working part length: 9mm
Quantity in set/package: 3pcs.
Kind of thread: metric; right hand thread
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 620.95 грн |
| 00105150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M4; 0.7; L: 45mm; Holder: square,hand; 3.4mm; 3pcs.
Type of tool: tap - set
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M4
Kind of thread: metric; right hand thread
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 45mm
Thread pitch: 0.7
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M4; 0.7; L: 45mm; Holder: square,hand; 3.4mm; 3pcs.
Type of tool: tap - set
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M4
Kind of thread: metric; right hand thread
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 45mm
Thread pitch: 0.7
Quantity in set/package: 3pcs.
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 2+ | 362.07 грн |
| 3+ | 299.22 грн |
| 5+ | 280.73 грн |
| 00105190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M6
Kind of thread: metric; right hand thread
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 1
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M6
Kind of thread: metric; right hand thread
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 1
Quantity in set/package: 3pcs.
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 2+ | 448.06 грн |
| 3+ | 370.67 грн |
| 00105380 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M45; 4.5; L: 160mm; Holder: square,hand; 29mm; 3pcs.
Type of tool: tap - set
Thread: M45
Thread pitch: 4.5
Length: 160mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 29mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
Working part length: 65mm
Category: Threading Dies and Taps
Description: Tap-set; M45; 4.5; L: 160mm; Holder: square,hand; 29mm; 3pcs.
Type of tool: tap - set
Thread: M45
Thread pitch: 4.5
Length: 160mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 29mm
Material: high speed steel grounded HSS-G
Kind of thread: metric; right hand thread
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
Working part length: 65mm
товару немає в наявності
В кошику
од. на суму грн.
| 00105400 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M52; 5; L: 180mm; Holder: square,hand; 32mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M52
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.18m
Holder socket size - mm: 32mm
Working part length: 70mm
Quantity in set/package: 3pcs.
Thread pitch: 5
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap-set; M52; 5; L: 180mm; Holder: square,hand; 32mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M52
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.18m
Holder socket size - mm: 32mm
Working part length: 70mm
Quantity in set/package: 3pcs.
Thread pitch: 5
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00106172 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; intermediate
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Version: intermediate
Thread: M5
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 50mm
Thread pitch: 0.8
Category: Threading Dies and Taps
Description: Tap; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; intermediate
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Version: intermediate
Thread: M5
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 50mm
Thread pitch: 0.8
товару немає в наявності
В кошику
од. на суму грн.
| 00106231 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; initial
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: initial
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; initial
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: initial
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00106232 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; intermediate
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: intermediate
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; intermediate
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: intermediate
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00106233 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; finishing
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: finishing
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 70mm; Holder: square,hand; 5.5mm; finishing
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 25mm
Length: 70mm
Thread pitch: 1.5
Kind of holder: hand; square
Conform to the norm: DIN 352
Version: finishing
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00106261 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; initial
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; initial
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 00106262 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; intermediate
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; intermediate
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 00106263 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; finishing
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 80mm; Holder: square,hand; 9mm; finishing
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 32mm
Length: 80mm
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 00106292 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Thread: M20
Type of tool: tap
Holder socket size - mm: 12mm
Working part length: 34mm
Length: 95mm
Thread pitch: 2.5
Version: intermediate
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 352
Kind of thread: metric; right hand thread
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Thread: M20
Type of tool: tap
Holder socket size - mm: 12mm
Working part length: 34mm
Length: 95mm
Thread pitch: 2.5
Version: intermediate
товару немає в наявності
В кошику
од. на суму грн.
| 00107170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; 3pcs.
Thread: M5
Kind of thread: metric; right hand thread
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 50mm
Thread pitch: 0.8
Quantity in set/package: 3pcs.
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Category: Threading Dies and Taps
Description: Tap-set; M5; 0.8; L: 50mm; Holder: square,hand; 4.9mm; 3pcs.
Thread: M5
Kind of thread: metric; right hand thread
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 50mm
Thread pitch: 0.8
Quantity in set/package: 3pcs.
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00107300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M22
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.1m
Holder socket size - mm: 14.5mm
Working part length: 34mm
Thread pitch: 2.5
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M22
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.1m
Holder socket size - mm: 14.5mm
Working part length: 34mm
Thread pitch: 2.5
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00107310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M24
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.11m
Holder socket size - mm: 14.5mm
Working part length: 38mm
Thread pitch: 3
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M24
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.11m
Holder socket size - mm: 14.5mm
Working part length: 38mm
Thread pitch: 3
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00107320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M27; 3; L: 110mm; Holder: square,hand; 16mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M27
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.11m
Holder socket size - mm: 16mm
Working part length: 38mm
Thread pitch: 3
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M27; 3; L: 110mm; Holder: square,hand; 16mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M27
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 0.11m
Holder socket size - mm: 16mm
Working part length: 38mm
Thread pitch: 3
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00107330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M30
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 125mm
Holder socket size - mm: 18mm
Working part length: 45mm
Thread pitch: 3.5
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Material: high speed steel cobalt HSS-E
Kind of holder: hand; square
Thread: M30
Kind of thread: metric; right hand thread
Type of tool: tap - set
Length: 125mm
Holder socket size - mm: 18mm
Working part length: 45mm
Thread pitch: 3.5
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00108271 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 80mm; Holder: square,hand; 9mm; initial
Version: initial
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: left hand thread; metric
Thread: M16
Holder socket size - mm: 9mm
Length: 80mm
Working part length: 32mm
Thread pitch: 2
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 80mm; Holder: square,hand; 9mm; initial
Version: initial
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: left hand thread; metric
Thread: M16
Holder socket size - mm: 9mm
Length: 80mm
Working part length: 32mm
Thread pitch: 2
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00108292 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate
Type of tool: tap
Thread: M20
Thread pitch: 2.5
Length: 95mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 12mm
Material: high speed steel grounded HSS-G
Kind of thread: left hand thread; metric
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 34mm
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 95mm; Holder: square,hand; 12mm; intermediate
Type of tool: tap
Thread: M20
Thread pitch: 2.5
Length: 95mm
Conform to the norm: DIN 352
Kind of holder: hand; square
Holder socket size - mm: 12mm
Material: high speed steel grounded HSS-G
Kind of thread: left hand thread; metric
Tools application: for blind holes; to the through holes
Version: intermediate
Working part length: 34mm
товару немає в наявності
В кошику
од. на суму грн.
| 00108301 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108302 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108303 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 100mm; Holder: square,hand; 14.5mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M22
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 34mm
Length: 0.1m
Thread pitch: 2.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108311 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108312 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108313 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 110mm; Holder: square,hand; 14.5mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M24
Type of tool: tap
Holder socket size - mm: 14.5mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108321 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108322 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108323 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 110mm; Holder: square,hand; 16mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M27
Type of tool: tap
Holder socket size - mm: 16mm
Working part length: 38mm
Length: 0.11m
Thread pitch: 3
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108331 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; initial
Kind of thread: left hand thread; metric
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108332 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; intermediate
Kind of thread: left hand thread; metric
Version: intermediate
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00108333 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 125mm; Holder: square,hand; 18mm; finishing
Kind of thread: left hand thread; metric
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M30
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Thread pitch: 3.5
Conform to the norm: DIN 352
товару немає в наявності
В кошику
од. на суму грн.
| 00109170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M5; 0.8; L: 48mm; Holder: square,hand; 4.9mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: left hand thread; metric
Thread: M5
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 48mm
Thread pitch: 0.8
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M5; 0.8; L: 48mm; Holder: square,hand; 4.9mm; 3pcs.
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: left hand thread; metric
Thread: M5
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 48mm
Thread pitch: 0.8
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00109190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: left hand thread; metric
Thread: M6
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 1
Quantity in set/package: 3pcs.
Category: Threading Dies and Taps
Description: Tap-set; M6; 1; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 352
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: left hand thread; metric
Thread: M6
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 1
Quantity in set/package: 3pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00114401 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1; L: 63mm; Holder: square,hand; 4.9mm; initial
Material: high speed steel grounded HSS-G
Version: initial
Kind of thread: fine thread; metric; right hand thread
Kind of holder: hand; square
Thread: M8
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 22mm
Length: 63mm
Thread pitch: 1
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2181
Category: Threading Dies and Taps
Description: Tap; M8; 1; L: 63mm; Holder: square,hand; 4.9mm; initial
Material: high speed steel grounded HSS-G
Version: initial
Kind of thread: fine thread; metric; right hand thread
Kind of holder: hand; square
Thread: M8
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 22mm
Length: 63mm
Thread pitch: 1
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2181
товару немає в наявності
В кошику
од. на суму грн.
| 00114413 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.5; L: 63mm; Holder: square,hand; 4.9mm; finishing
Type of tool: tap
Thread: M8
Thread pitch: 1.5
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; metric; right hand thread
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; M8; 1.5; L: 63mm; Holder: square,hand; 4.9mm; finishing
Type of tool: tap
Thread: M8
Thread pitch: 1.5
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; metric; right hand thread
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00114423 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M9; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing
Type of tool: tap
Thread: M9
Thread pitch: 0.5
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand; square
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; metric; right hand thread
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; M9; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing
Type of tool: tap
Thread: M9
Thread pitch: 0.5
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand; square
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; metric; right hand thread
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00114451 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; initial
Conform to the norm: DIN 2181
Kind of thread: fine thread; metric; right hand thread
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M10
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 0.5
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; initial
Conform to the norm: DIN 2181
Kind of thread: fine thread; metric; right hand thread
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M10
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 0.5
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00114453 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing
Conform to the norm: DIN 2181
Kind of thread: fine thread; metric; right hand thread
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M10
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 0.5
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; M10; 0.5; L: 63mm; Holder: square,hand; 5.5mm; finishing
Conform to the norm: DIN 2181
Kind of thread: fine thread; metric; right hand thread
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: M10
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 0.5
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00114471 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: square,hand; 5.5mm; initial
Thread: M10
Version: initial
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 1
Conform to the norm: DIN 2181
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: square,hand; 5.5mm; initial
Thread: M10
Version: initial
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Type of tool: tap
Holder socket size - mm: 5.5mm
Working part length: 20mm
Length: 63mm
Thread pitch: 1
Conform to the norm: DIN 2181
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00114603 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M13; 1; L: 70mm; Holder: square,hand; 9mm; finishing
Material: high speed steel grounded HSS-G
Version: finishing
Thread: M13
Kind of holder: hand; square
Type of tool: tap
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Holder socket size - mm: 9mm
Working part length: 22mm
Conform to the norm: DIN 2181
Length: 70mm
Thread pitch: 1
Category: Threading Dies and Taps
Description: Tap; M13; 1; L: 70mm; Holder: square,hand; 9mm; finishing
Material: high speed steel grounded HSS-G
Version: finishing
Thread: M13
Kind of holder: hand; square
Type of tool: tap
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Holder socket size - mm: 9mm
Working part length: 22mm
Conform to the norm: DIN 2181
Length: 70mm
Thread pitch: 1
товару немає в наявності
В кошику
од. на суму грн.
| 00114613 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M13; 1.25; L: 70mm; Holder: square,hand; 9mm; finishing
Type of tool: tap
Length: 70mm
Conform to the norm: DIN 2181
Holder socket size - mm: 9mm
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Version: finishing
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M13
Working part length: 22mm
Thread pitch: 1.25
Category: Threading Dies and Taps
Description: Tap; M13; 1.25; L: 70mm; Holder: square,hand; 9mm; finishing
Type of tool: tap
Length: 70mm
Conform to the norm: DIN 2181
Holder socket size - mm: 9mm
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; metric; right hand thread
Version: finishing
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: M13
Working part length: 22mm
Thread pitch: 1.25
товару немає в наявності
В кошику
од. на суму грн.