Продукція > GSR GUSTAV STURSBERG GMBH > Всі товари виробника GSR GUSTAV STURSBERG GMBH (1137) > Сторінка 4 з 19
| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна |
|---|---|---|---|---|---|
| 00154241 | GSR GUSTAV STURSBERG GMBH |
 Category: Threading Dies and TapsDescription: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; initial Type of tool: tap Length: 160mm Holder socket size - mm: 39mm Working part length: 40mm Thread pitch: 11 Kind of thread: BSP; inch; right hand thread Thread: BSP 2 1/4" Conform to the norm: DIN 5157 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00154243 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; finishing Type of tool: tap Length: 160mm Holder socket size - mm: 39mm Working part length: 40mm Thread pitch: 11 Kind of thread: BSP; inch; right hand thread Thread: BSP 2 1/4" Conform to the norm: DIN 5157 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00154251 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; initial Kind of thread: BSP; inch; right hand thread Thread: BSP 2 1/2" Conform to the norm: DIN 5157 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 39mm Working part length: 40mm Length: 160mm Thread pitch: 11 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00154253 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; finishing Kind of thread: BSP; inch; right hand thread Thread: BSP 2 1/2" Conform to the norm: DIN 5157 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 39mm Working part length: 40mm Length: 160mm Thread pitch: 11 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00155020 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; BSP 1/8"; 28; L: 63mm; Holder: square,hand; 5.5mm; 2pcs. Type of tool: tap - set Thread: BSP 1/8" Thread pitch: 28 Length: 63mm Conform to the norm: DIN 5157 Kind of holder: hand; square Holder socket size - mm: 5.5mm Material: high speed steel grounded HSS-G Kind of thread: BSP; inch; right hand thread Tools application: for blind holes; to the through holes Working part length: 20mm Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00155270 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; BSP 3"; 11; L: 160mm; Holder: square,hand; 39mm; 2pcs. Type of tool: tap - set Thread: BSP 3" Thread pitch: 11 Length: 160mm Conform to the norm: DIN 5157 Kind of holder: hand; square Holder socket size - mm: 39mm Material: high speed steel grounded HSS-G Kind of thread: BSP; inch; right hand thread Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 40mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00164082 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNC 8; 32; L: 45mm; Holder: square,hand; 3.4mm; intermediate Type of tool: tap Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNC Version: intermediate Thread: UNC 8 Holder socket size - mm: 3.4mm Working part length: 13mm Length: 45mm Thread pitch: 32 Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00164131 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; initial Type of tool: tap Thread: UNC 1/4" Holder socket size - mm: 4.9mm Working part length: 19mm Length: 56mm Thread pitch: 20 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNC Version: initial |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00164183 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNC 9/16"; 12; L: 80mm; Holder: square,hand; 9mm; finishing Type of tool: tap Thread: UNC 9/16" Thread pitch: 12 Length: 80mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 9mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNC Tools application: for blind holes; to the through holes Version: finishing Working part length: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00165010 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNC 1; 64; L: 36mm; Holder: square,hand; 2.1mm; 3pcs. Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNC Type of tool: tap - set Thread: UNC 1 Holder socket size - mm: 2.1mm Working part length: 8mm Length: 36mm Quantity in set/package: 3pcs. Thread pitch: 64 Tools application: for blind holes; to the through holes Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00165120 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNC 12; 24; L: 56mm; Holder: square,hand; 4.9mm; 3pcs. Kind of holder: hand; square Kind of thread: inch; right hand thread; UNC Type of tool: tap - set Thread: UNC 12 Working part length: 17mm Holder socket size - mm: 4.9mm Length: 56mm Quantity in set/package: 3pcs. Thread pitch: 24 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00165130 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; 3pcs. Tools application: for blind holes; to the through holes Kind of holder: hand; square Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNC Type of tool: tap - set Holder socket size - mm: 4.9mm Length: 56mm Working part length: 19mm Quantity in set/package: 3pcs. Thread pitch: 20 Thread: UNC 1/4" |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166081 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; initial Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Type of tool: tap Thread: UN 11/16" Holder socket size - mm: 14mm Working part length: 22mm Length: 80mm Thread pitch: 16 Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166083 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; finishing Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Type of tool: tap Thread: UN 11/16" Holder socket size - mm: 14mm Working part length: 22mm Length: 80mm Thread pitch: 16 Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166171 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; initial Version: initial Kind of thread: inch; right hand thread; UN Type of tool: tap Thread: UN 1 5/8" Holder socket size - mm: 24mm Working part length: 40mm Length: 125mm Thread pitch: 12 Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166173 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; finishing Version: finishing Kind of thread: inch; right hand thread; UN Type of tool: tap Thread: UN 1 5/8" Holder socket size - mm: 24mm Working part length: 40mm Length: 125mm Thread pitch: 12 Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166261 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Version: initial Thread: UN 2 1/2" Holder socket size - mm: 39mm Working part length: 56mm Length: 0.18m Thread pitch: 8 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Type of tool: tap |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00166271 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; initial Type of tool: tap Thread: UN 2 3/4" Thread pitch: 8 Length: 0.2m Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 39mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Version: initial Working part length: 56mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00167030 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNS 1/4"; 24; L: 56mm; Holder: square,hand; 4.9mm; 2pcs. Type of tool: tap - set Thread: UNS 1/4" Thread pitch: 24 Length: 56mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 4.9mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNS Tools application: for blind holes; to the through holes Working part length: 19mm Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00167060 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UN 9/16"; 20; L: 70mm; Holder: square,hand; 9mm; 2pcs. Type of tool: tap - set Thread: UN 9/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 9mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00167100 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs. Length: 90mm Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UN Thread: UN 1 1/16" Type of tool: tap - set Holder socket size - mm: 16mm Working part length: 22mm Quantity in set/package: 2pcs. Thread pitch: 12 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00167220 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs. Type of tool: tap - set Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UN Thread: UN 1 7/8" Holder socket size - mm: 29mm Working part length: 40mm Length: 140mm Quantity in set/package: 2pcs. Thread pitch: 8 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174001 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial Type of tool: tap Thread: UNF 0 Length: 32mm Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: initial Thread pitch: 80 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174003 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: UNF 0 Length: 32mm Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: finishing Thread pitch: 80 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174013 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 1; 72; L: 36mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: UNF 1 Working part length: 8mm Length: 36mm Thread pitch: 72 Holder socket size - mm: 2.1mm Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174023 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 2; 64; L: 36mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: UNF 2 Holder socket size - mm: 2.1mm Working part length: 9mm Length: 36mm Thread pitch: 64 Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174031 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; initial Type of tool: tap Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: UNF 3 Holder socket size - mm: 2.1mm Working part length: 9mm Length: 40mm Thread pitch: 56 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174033 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: UNF 3 Holder socket size - mm: 2.1mm Working part length: 9mm Length: 40mm Thread pitch: 56 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174061 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 6; 40; L: 45mm; Holder: square,hand; 3mm; initial Type of tool: tap Thread: UNF 6 Thread pitch: 40 Length: 45mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 3mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: initial Working part length: 12mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174101 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial Working part length: 16mm Length: 50mm Thread pitch: 32 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: initial Type of tool: tap Thread: UNF 10 Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174103 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174121 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; initial Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Version: initial Type of tool: tap Thread: UNF 12 Holder socket size - mm: 4.9mm Working part length: 17mm Length: 56mm Thread pitch: 28 Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174151 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; initial Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 3/8" Type of tool: tap Length: 63mm Holder socket size - mm: 5.5mm Working part length: 20mm Thread pitch: 24 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174153 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; finishing Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 3/8" Type of tool: tap Length: 63mm Holder socket size - mm: 5.5mm Working part length: 20mm Thread pitch: 24 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174161 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial Type of tool: tap Thread: UNF 7/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 6.2mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: initial Working part length: 24mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174163 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing Type of tool: tap Thread: UNF 7/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 6.2mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: finishing Working part length: 24mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174171 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; initial Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 1/2" Type of tool: tap Length: 70mm Holder socket size - mm: 7mm Working part length: 22mm Thread pitch: 20 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174173 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; finishing Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 1/2" Type of tool: tap Length: 70mm Holder socket size - mm: 7mm Working part length: 22mm Thread pitch: 20 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174183 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; finishing Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Type of tool: tap Thread: UNF 9/16" Holder socket size - mm: 9mm Working part length: 22mm Length: 70mm Thread pitch: 18 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174211 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial Type of tool: tap Thread: UNF 3/4" Length: 80mm Kind of holder: hand; square Holder socket size - mm: 11mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: initial Thread pitch: 16 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174213 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; finishing Type of tool: tap Thread: UNF 3/4" Length: 80mm Kind of holder: hand; square Holder socket size - mm: 11mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: finishing Thread pitch: 16 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174231 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm; initial Type of tool: tap Thread: UNF 7/8-14" Length: 80mm Kind of holder: hand; square Holder socket size - mm: 14.5mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: initial Thread pitch: 14 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00174233 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm Type of tool: tap Thread: UNF 7/8-14" Length: 80mm Kind of holder: hand; square Holder socket size - mm: 14.5mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Version: finishing Thread pitch: 14 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00175000 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs. Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap - set Thread: UNF 0 Holder socket size - mm: 2.5mm Working part length: 8mm Length: 32mm Thread pitch: 80 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00175030 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNF 3; 56; L: 40mm; Holder: square,hand; 2.8mm; 2pcs. Type of tool: tap - set Quantity in set/package: 2pcs. Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: UNF 3 Holder socket size - mm: 2.8mm Working part length: 9mm Length: 40mm Thread pitch: 56 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00175080 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNF 8; 36; L: 45mm; Holder: square,hand; 4.5mm; 2pcs. Conform to the norm: DIN 2184-2 Thread: UNF 8 Holder socket size - mm: 4.5mm Working part length: 13mm Length: 45mm Quantity in set/package: 2pcs. Tools application: for blind holes; to the through holes Thread pitch: 36 Material: high speed steel grounded HSS-G Kind of thread: fine thread; inch; right hand thread; UNF Type of tool: tap - set Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00175210 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs. Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Tools application: for blind holes; to the through holes Type of tool: tap - set Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: UNF 3/4" Holder socket size - mm: 11mm Working part length: 22mm Length: 80mm Quantity in set/package: 2pcs. Thread pitch: 16 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00175230 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs. Type of tool: tap - set Thread: UNF 7/8" Length: 80mm Kind of holder: hand; square Holder socket size - mm: 14.5mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. Thread pitch: 14 Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00176103 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNEF 3/4"; 20; L: 80mm; Holder: square,hand; 11mm; finishing Thread: UNEF 3/4" Holder socket size - mm: 11mm Working part length: 22mm Length: 80mm Thread pitch: 20 Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Type of tool: tap Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UNEF |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00176221 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial Type of tool: tap Thread: UNEF 1 1/2" Thread pitch: 18 Length: 0.1m Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 22mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Version: initial Working part length: 25mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00176241 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Type of tool: tap Thread: UNEF 1 5/8" Length: 0.1m Holder socket size - mm: 24mm Working part length: 25mm Thread pitch: 18 Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00176243 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Type of tool: tap Thread: UNEF 1 5/8" Length: 0.1m Holder socket size - mm: 24mm Working part length: 25mm Thread pitch: 18 Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00177140 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNEF 1"; 20; L: 90mm; Holder: square,hand; 18mm; 2pcs. Type of tool: tap - set Thread: UNEF 1" Thread pitch: 20 Length: 90mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 18mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00177210 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; UNEF 1 7/16"; 18; L: 100mm; Holder: square,hand; 28mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap - set Working part length: 25mm Holder socket size - mm: 28mm Length: 0.1m Quantity in set/package: 2pcs. Thread pitch: 18 Thread: UNEF 1 7/16" |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00181050 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; NPT 1/2"; 14; L: 80mm; Holder: square,hand; 16mm; 2pcs. Type of tool: tap - set Holder socket size - mm: 16mm Working part length: 27mm Length: 80mm Thread pitch: 14 Quantity in set/package: 2pcs. Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: conical; inch; NPT; right hand thread Thread: NPT 1/2" |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00183220 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs. Material: high speed steel cobalt HSS-E Kind of thread: right hand thread; TR; trapezoidal Type of tool: tap - set Tools application: to the through holes Thread: Tr 36 Holder socket size - mm: 22mm Working part length: 68mm Length: 240mm Quantity in set/package: 2pcs. Thread pitch: 3 Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00189150 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; Tr 24; 3; L: 170mm; Holder: square,hand; 14.5mm; 2pcs. Tools application: to the through holes Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 14.5mm Working part length: 52mm Length: 170mm Thread pitch: 3 Quantity in set/package: 2pcs. Material: high speed steel cobalt HSS-E Kind of thread: left hand thread; TR; trapezoidal Thread: Tr 24 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00189210 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; Tr 32; 6; L: 255mm; Holder: square,hand; 20mm; 3pcs. Type of tool: tap - set Thread: Tr 32 Thread pitch: 6 Length: 255mm Kind of holder: hand; square Holder socket size - mm: 20mm Material: high speed steel cobalt HSS-E Kind of thread: left hand thread; TR; trapezoidal Tools application: to the through holes Quantity in set/package: 3pcs. Working part length: 92mm |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00189220 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs. Tools application: to the through holes Type of tool: tap - set Kind of holder: hand; square Material: high speed steel cobalt HSS-E Kind of thread: left hand thread; TR; trapezoidal Thread: Tr 36 Holder socket size - mm: 22mm Working part length: 68mm Length: 240mm Quantity in set/package: 2pcs. Thread pitch: 3 |
товару немає в наявності |
В кошику од. на суму грн. | |
| 00189230 | GSR GUSTAV STURSBERG GMBH |
Category: Threading Dies and Taps Description: Tap-set; Tr 36; 6; L: 280mm; Holder: square,hand; 22mm; 3pcs. Type of tool: tap - set Thread: Tr 36 Thread pitch: 6 Length: 0.28m Kind of holder: hand; square Holder socket size - mm: 22mm Material: high speed steel cobalt HSS-E Kind of thread: left hand thread; TR; trapezoidal Tools application: to the through holes Quantity in set/package: 3pcs. Working part length: 96mm |
товару немає в наявності |
В кошику од. на суму грн. |
| 00154241 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; initial
Type of tool: tap
Length: 160mm
Holder socket size - mm: 39mm
Working part length: 40mm
Thread pitch: 11
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/4"
Conform to the norm: DIN 5157
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; initial
Type of tool: tap
Length: 160mm
Holder socket size - mm: 39mm
Working part length: 40mm
Thread pitch: 11
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/4"
Conform to the norm: DIN 5157
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00154243 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; finishing
Type of tool: tap
Length: 160mm
Holder socket size - mm: 39mm
Working part length: 40mm
Thread pitch: 11
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/4"
Conform to the norm: DIN 5157
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/4"; 11; L: 160mm; Holder: square,hand; 39mm; finishing
Type of tool: tap
Length: 160mm
Holder socket size - mm: 39mm
Working part length: 40mm
Thread pitch: 11
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/4"
Conform to the norm: DIN 5157
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00154251 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; initial
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/2"
Conform to the norm: DIN 5157
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 39mm
Working part length: 40mm
Length: 160mm
Thread pitch: 11
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; initial
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/2"
Conform to the norm: DIN 5157
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 39mm
Working part length: 40mm
Length: 160mm
Thread pitch: 11
товару немає в наявності
В кошику
од. на суму грн.
| 00154253 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; finishing
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/2"
Conform to the norm: DIN 5157
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 39mm
Working part length: 40mm
Length: 160mm
Thread pitch: 11
Category: Threading Dies and Taps
Description: Tap; BSP 2 1/2"; 11; L: 160mm; Holder: square,hand; 39mm; finishing
Kind of thread: BSP; inch; right hand thread
Thread: BSP 2 1/2"
Conform to the norm: DIN 5157
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 39mm
Working part length: 40mm
Length: 160mm
Thread pitch: 11
товару немає в наявності
В кошику
од. на суму грн.
| 00155020 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; BSP 1/8"; 28; L: 63mm; Holder: square,hand; 5.5mm; 2pcs.
Type of tool: tap - set
Thread: BSP 1/8"
Thread pitch: 28
Length: 63mm
Conform to the norm: DIN 5157
Kind of holder: hand; square
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Kind of thread: BSP; inch; right hand thread
Tools application: for blind holes; to the through holes
Working part length: 20mm
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; BSP 1/8"; 28; L: 63mm; Holder: square,hand; 5.5mm; 2pcs.
Type of tool: tap - set
Thread: BSP 1/8"
Thread pitch: 28
Length: 63mm
Conform to the norm: DIN 5157
Kind of holder: hand; square
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Kind of thread: BSP; inch; right hand thread
Tools application: for blind holes; to the through holes
Working part length: 20mm
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00155270 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; BSP 3"; 11; L: 160mm; Holder: square,hand; 39mm; 2pcs.
Type of tool: tap - set
Thread: BSP 3"
Thread pitch: 11
Length: 160mm
Conform to the norm: DIN 5157
Kind of holder: hand; square
Holder socket size - mm: 39mm
Material: high speed steel grounded HSS-G
Kind of thread: BSP; inch; right hand thread
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 40mm
Category: Threading Dies and Taps
Description: Tap-set; BSP 3"; 11; L: 160mm; Holder: square,hand; 39mm; 2pcs.
Type of tool: tap - set
Thread: BSP 3"
Thread pitch: 11
Length: 160mm
Conform to the norm: DIN 5157
Kind of holder: hand; square
Holder socket size - mm: 39mm
Material: high speed steel grounded HSS-G
Kind of thread: BSP; inch; right hand thread
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 40mm
товару немає в наявності
В кошику
од. на суму грн.
| 00164082 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNC 8; 32; L: 45mm; Holder: square,hand; 3.4mm; intermediate
Type of tool: tap
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Version: intermediate
Thread: UNC 8
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 45mm
Thread pitch: 32
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UNC 8; 32; L: 45mm; Holder: square,hand; 3.4mm; intermediate
Type of tool: tap
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Version: intermediate
Thread: UNC 8
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 45mm
Thread pitch: 32
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00164131 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; initial
Type of tool: tap
Thread: UNC 1/4"
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 20
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Version: initial
Category: Threading Dies and Taps
Description: Tap; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; initial
Type of tool: tap
Thread: UNC 1/4"
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 56mm
Thread pitch: 20
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Version: initial
товару немає в наявності
В кошику
од. на суму грн.
| 00164183 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNC 9/16"; 12; L: 80mm; Holder: square,hand; 9mm; finishing
Type of tool: tap
Thread: UNC 9/16"
Thread pitch: 12
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 30mm
Category: Threading Dies and Taps
Description: Tap; UNC 9/16"; 12; L: 80mm; Holder: square,hand; 9mm; finishing
Type of tool: tap
Thread: UNC 9/16"
Thread pitch: 12
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 00165010 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNC 1; 64; L: 36mm; Holder: square,hand; 2.1mm; 3pcs.
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Thread: UNC 1
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 36mm
Quantity in set/package: 3pcs.
Thread pitch: 64
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap-set; UNC 1; 64; L: 36mm; Holder: square,hand; 2.1mm; 3pcs.
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Thread: UNC 1
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 36mm
Quantity in set/package: 3pcs.
Thread pitch: 64
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00165120 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNC 12; 24; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Thread: UNC 12
Working part length: 17mm
Holder socket size - mm: 4.9mm
Length: 56mm
Quantity in set/package: 3pcs.
Thread pitch: 24
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap-set; UNC 12; 24; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Thread: UNC 12
Working part length: 17mm
Holder socket size - mm: 4.9mm
Length: 56mm
Quantity in set/package: 3pcs.
Thread pitch: 24
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00165130 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Length: 56mm
Working part length: 19mm
Quantity in set/package: 3pcs.
Thread pitch: 20
Thread: UNC 1/4"
Category: Threading Dies and Taps
Description: Tap-set; UNC 1/4"; 20; L: 56mm; Holder: square,hand; 4.9mm; 3pcs.
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNC
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Length: 56mm
Working part length: 19mm
Quantity in set/package: 3pcs.
Thread pitch: 20
Thread: UNC 1/4"
товару немає в наявності
В кошику
од. на суму грн.
| 00166081 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; initial
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Type of tool: tap
Thread: UN 11/16"
Holder socket size - mm: 14mm
Working part length: 22mm
Length: 80mm
Thread pitch: 16
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Category: Threading Dies and Taps
Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; initial
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Type of tool: tap
Thread: UN 11/16"
Holder socket size - mm: 14mm
Working part length: 22mm
Length: 80mm
Thread pitch: 16
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
товару немає в наявності
В кошику
од. на суму грн.
| 00166083 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; finishing
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Type of tool: tap
Thread: UN 11/16"
Holder socket size - mm: 14mm
Working part length: 22mm
Length: 80mm
Thread pitch: 16
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Category: Threading Dies and Taps
Description: Tap; UN 11/16"; 16; L: 80mm; Holder: square,hand; 14mm; finishing
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Type of tool: tap
Thread: UN 11/16"
Holder socket size - mm: 14mm
Working part length: 22mm
Length: 80mm
Thread pitch: 16
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
товару немає в наявності
В кошику
од. на суму грн.
| 00166171 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; initial
Version: initial
Kind of thread: inch; right hand thread; UN
Type of tool: tap
Thread: UN 1 5/8"
Holder socket size - mm: 24mm
Working part length: 40mm
Length: 125mm
Thread pitch: 12
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Category: Threading Dies and Taps
Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; initial
Version: initial
Kind of thread: inch; right hand thread; UN
Type of tool: tap
Thread: UN 1 5/8"
Holder socket size - mm: 24mm
Working part length: 40mm
Length: 125mm
Thread pitch: 12
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00166173 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; finishing
Version: finishing
Kind of thread: inch; right hand thread; UN
Type of tool: tap
Thread: UN 1 5/8"
Holder socket size - mm: 24mm
Working part length: 40mm
Length: 125mm
Thread pitch: 12
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Category: Threading Dies and Taps
Description: Tap; UN 1 5/8"; 12; L: 125mm; Holder: square,hand; 24mm; finishing
Version: finishing
Kind of thread: inch; right hand thread; UN
Type of tool: tap
Thread: UN 1 5/8"
Holder socket size - mm: 24mm
Working part length: 40mm
Length: 125mm
Thread pitch: 12
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00166261 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Version: initial
Thread: UN 2 1/2"
Holder socket size - mm: 39mm
Working part length: 56mm
Length: 0.18m
Thread pitch: 8
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Version: initial
Thread: UN 2 1/2"
Holder socket size - mm: 39mm
Working part length: 56mm
Length: 0.18m
Thread pitch: 8
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
товару немає в наявності
В кошику
од. на суму грн.
| 00166271 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; initial
Type of tool: tap
Thread: UN 2 3/4"
Thread pitch: 8
Length: 0.2m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 39mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 56mm
Category: Threading Dies and Taps
Description: Tap; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; initial
Type of tool: tap
Thread: UN 2 3/4"
Thread pitch: 8
Length: 0.2m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 39mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 56mm
товару немає в наявності
В кошику
од. на суму грн.
| 00167030 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNS 1/4"; 24; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Type of tool: tap - set
Thread: UNS 1/4"
Thread pitch: 24
Length: 56mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNS
Tools application: for blind holes; to the through holes
Working part length: 19mm
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UNS 1/4"; 24; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Type of tool: tap - set
Thread: UNS 1/4"
Thread pitch: 24
Length: 56mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNS
Tools application: for blind holes; to the through holes
Working part length: 19mm
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00167060 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UN 9/16"; 20; L: 70mm; Holder: square,hand; 9mm; 2pcs.
Type of tool: tap - set
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UN 9/16"; 20; L: 70mm; Holder: square,hand; 9mm; 2pcs.
Type of tool: tap - set
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00167100 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs.
Length: 90mm
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Thread: UN 1 1/16"
Type of tool: tap - set
Holder socket size - mm: 16mm
Working part length: 22mm
Quantity in set/package: 2pcs.
Thread pitch: 12
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs.
Length: 90mm
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Thread: UN 1 1/16"
Type of tool: tap - set
Holder socket size - mm: 16mm
Working part length: 22mm
Quantity in set/package: 2pcs.
Thread pitch: 12
товару немає в наявності
В кошику
од. на суму грн.
| 00167220 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs.
Type of tool: tap - set
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Holder socket size - mm: 29mm
Working part length: 40mm
Length: 140mm
Quantity in set/package: 2pcs.
Thread pitch: 8
Category: Threading Dies and Taps
Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs.
Type of tool: tap - set
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Holder socket size - mm: 29mm
Working part length: 40mm
Length: 140mm
Quantity in set/package: 2pcs.
Thread pitch: 8
товару немає в наявності
В кошику
од. на суму грн.
| 00174001 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: UNF 0
Length: 32mm
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 80
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Thread: UNF 0
Length: 32mm
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 80
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174003 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 0
Length: 32mm
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 80
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 0
Length: 32mm
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 80
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174013 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 1; 72; L: 36mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 1
Working part length: 8mm
Length: 36mm
Thread pitch: 72
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 1; 72; L: 36mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 1
Working part length: 8mm
Length: 36mm
Thread pitch: 72
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174023 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 2; 64; L: 36mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 2
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 64
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 2; 64; L: 36mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 2
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 36mm
Thread pitch: 64
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174031 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; initial
Type of tool: tap
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
товару немає в наявності
В кошику
од. на суму грн.
| 00174033 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.1mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
товару немає в наявності
В кошику
од. на суму грн.
| 00174061 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 6; 40; L: 45mm; Holder: square,hand; 3mm; initial
Type of tool: tap
Thread: UNF 6
Thread pitch: 40
Length: 45mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 3mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 12mm
Category: Threading Dies and Taps
Description: Tap; UNF 6; 40; L: 45mm; Holder: square,hand; 3mm; initial
Type of tool: tap
Thread: UNF 6
Thread pitch: 40
Length: 45mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 3mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 12mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174101 |
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial
Working part length: 16mm
Length: 50mm
Thread pitch: 32
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Type of tool: tap
Thread: UNF 10
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial
Working part length: 16mm
Length: 50mm
Thread pitch: 32
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Type of tool: tap
Thread: UNF 10
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174103 |
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing
товару немає в наявності
В кошику
од. на суму грн.
| 00174121 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Version: initial
Type of tool: tap
Thread: UNF 12
Holder socket size - mm: 4.9mm
Working part length: 17mm
Length: 56mm
Thread pitch: 28
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Version: initial
Type of tool: tap
Thread: UNF 12
Holder socket size - mm: 4.9mm
Working part length: 17mm
Length: 56mm
Thread pitch: 28
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00174151 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; initial
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 3/8"
Type of tool: tap
Length: 63mm
Holder socket size - mm: 5.5mm
Working part length: 20mm
Thread pitch: 24
Category: Threading Dies and Taps
Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; initial
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 3/8"
Type of tool: tap
Length: 63mm
Holder socket size - mm: 5.5mm
Working part length: 20mm
Thread pitch: 24
товару немає в наявності
В кошику
од. на суму грн.
| 00174153 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 3/8"
Type of tool: tap
Length: 63mm
Holder socket size - mm: 5.5mm
Working part length: 20mm
Thread pitch: 24
Category: Threading Dies and Taps
Description: Tap; UNF 3/8"; 24; L: 63mm; Holder: square,hand; 5.5mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 3/8"
Type of tool: tap
Length: 63mm
Holder socket size - mm: 5.5mm
Working part length: 20mm
Thread pitch: 24
товару немає в наявності
В кошику
од. на суму грн.
| 00174161 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 24mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 24mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174163 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 24mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 24mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174171 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; initial
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 1/2"
Type of tool: tap
Length: 70mm
Holder socket size - mm: 7mm
Working part length: 22mm
Thread pitch: 20
Category: Threading Dies and Taps
Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; initial
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 1/2"
Type of tool: tap
Length: 70mm
Holder socket size - mm: 7mm
Working part length: 22mm
Thread pitch: 20
товару немає в наявності
В кошику
од. на суму грн.
| 00174173 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 1/2"
Type of tool: tap
Length: 70mm
Holder socket size - mm: 7mm
Working part length: 22mm
Thread pitch: 20
Category: Threading Dies and Taps
Description: Tap; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 1/2"
Type of tool: tap
Length: 70mm
Holder socket size - mm: 7mm
Working part length: 22mm
Thread pitch: 20
товару немає в наявності
В кошику
од. на суму грн.
| 00174183 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Type of tool: tap
Thread: UNF 9/16"
Holder socket size - mm: 9mm
Working part length: 22mm
Length: 70mm
Thread pitch: 18
Category: Threading Dies and Taps
Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; finishing
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Type of tool: tap
Thread: UNF 9/16"
Holder socket size - mm: 9mm
Working part length: 22mm
Length: 70mm
Thread pitch: 18
товару немає в наявності
В кошику
од. на суму грн.
| 00174211 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UNF 3/4"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 16
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UNF 3/4"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 16
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174213 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; finishing
Type of tool: tap
Thread: UNF 3/4"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 16
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; finishing
Type of tool: tap
Thread: UNF 3/4"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 16
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174231 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm; initial
Type of tool: tap
Thread: UNF 7/8-14"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm; initial
Type of tool: tap
Thread: UNF 7/8-14"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: initial
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174233 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm
Type of tool: tap
Thread: UNF 7/8-14"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm
Type of tool: tap
Thread: UNF 7/8-14"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Version: finishing
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00175000 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap - set
Thread: UNF 0
Holder socket size - mm: 2.5mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
Category: Threading Dies and Taps
Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap - set
Thread: UNF 0
Holder socket size - mm: 2.5mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
товару немає в наявності
В кошику
од. на суму грн.
| 00175030 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNF 3; 56; L: 40mm; Holder: square,hand; 2.8mm; 2pcs.
Type of tool: tap - set
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.8mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
Category: Threading Dies and Taps
Description: Tap-set; UNF 3; 56; L: 40mm; Holder: square,hand; 2.8mm; 2pcs.
Type of tool: tap - set
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3
Holder socket size - mm: 2.8mm
Working part length: 9mm
Length: 40mm
Thread pitch: 56
товару немає в наявності
В кошику
од. на суму грн.
| 00175080 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNF 8; 36; L: 45mm; Holder: square,hand; 4.5mm; 2pcs.
Conform to the norm: DIN 2184-2
Thread: UNF 8
Holder socket size - mm: 4.5mm
Working part length: 13mm
Length: 45mm
Quantity in set/package: 2pcs.
Tools application: for blind holes; to the through holes
Thread pitch: 36
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Type of tool: tap - set
Kind of holder: hand; square
Category: Threading Dies and Taps
Description: Tap-set; UNF 8; 36; L: 45mm; Holder: square,hand; 4.5mm; 2pcs.
Conform to the norm: DIN 2184-2
Thread: UNF 8
Holder socket size - mm: 4.5mm
Working part length: 13mm
Length: 45mm
Quantity in set/package: 2pcs.
Tools application: for blind holes; to the through holes
Thread pitch: 36
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Type of tool: tap - set
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00175210 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3/4"
Holder socket size - mm: 11mm
Working part length: 22mm
Length: 80mm
Quantity in set/package: 2pcs.
Thread pitch: 16
Category: Threading Dies and Taps
Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs.
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNF 3/4"
Holder socket size - mm: 11mm
Working part length: 22mm
Length: 80mm
Quantity in set/package: 2pcs.
Thread pitch: 16
товару немає в наявності
В кошику
од. на суму грн.
| 00175230 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs.
Type of tool: tap - set
Thread: UNF 7/8"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs.
Type of tool: tap - set
Thread: UNF 7/8"
Length: 80mm
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Thread pitch: 14
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00176103 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNEF 3/4"; 20; L: 80mm; Holder: square,hand; 11mm; finishing
Thread: UNEF 3/4"
Holder socket size - mm: 11mm
Working part length: 22mm
Length: 80mm
Thread pitch: 20
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Type of tool: tap
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNEF
Category: Threading Dies and Taps
Description: Tap; UNEF 3/4"; 20; L: 80mm; Holder: square,hand; 11mm; finishing
Thread: UNEF 3/4"
Holder socket size - mm: 11mm
Working part length: 22mm
Length: 80mm
Thread pitch: 20
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Type of tool: tap
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNEF
товару немає в наявності
В кошику
од. на суму грн.
| 00176221 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial
Type of tool: tap
Thread: UNEF 1 1/2"
Thread pitch: 18
Length: 0.1m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 25mm
Category: Threading Dies and Taps
Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial
Type of tool: tap
Thread: UNEF 1 1/2"
Thread pitch: 18
Length: 0.1m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 25mm
товару немає в наявності
В кошику
од. на суму грн.
| 00176241 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 1 5/8"
Length: 0.1m
Holder socket size - mm: 24mm
Working part length: 25mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 1 5/8"
Length: 0.1m
Holder socket size - mm: 24mm
Working part length: 25mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00176243 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 1 5/8"
Length: 0.1m
Holder socket size - mm: 24mm
Working part length: 25mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 1 5/8"
Length: 0.1m
Holder socket size - mm: 24mm
Working part length: 25mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00177140 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1"; 20; L: 90mm; Holder: square,hand; 18mm; 2pcs.
Type of tool: tap - set
Thread: UNEF 1"
Thread pitch: 20
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1"; 20; L: 90mm; Holder: square,hand; 18mm; 2pcs.
Type of tool: tap - set
Thread: UNEF 1"
Thread pitch: 20
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00177210 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1 7/16"; 18; L: 100mm; Holder: square,hand; 28mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap - set
Working part length: 25mm
Holder socket size - mm: 28mm
Length: 0.1m
Quantity in set/package: 2pcs.
Thread pitch: 18
Thread: UNEF 1 7/16"
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1 7/16"; 18; L: 100mm; Holder: square,hand; 28mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap - set
Working part length: 25mm
Holder socket size - mm: 28mm
Length: 0.1m
Quantity in set/package: 2pcs.
Thread pitch: 18
Thread: UNEF 1 7/16"
товару немає в наявності
В кошику
од. на суму грн.
| 00181050 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; NPT 1/2"; 14; L: 80mm; Holder: square,hand; 16mm; 2pcs.
Type of tool: tap - set
Holder socket size - mm: 16mm
Working part length: 27mm
Length: 80mm
Thread pitch: 14
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: conical; inch; NPT; right hand thread
Thread: NPT 1/2"
Category: Threading Dies and Taps
Description: Tap-set; NPT 1/2"; 14; L: 80mm; Holder: square,hand; 16mm; 2pcs.
Type of tool: tap - set
Holder socket size - mm: 16mm
Working part length: 27mm
Length: 80mm
Thread pitch: 14
Quantity in set/package: 2pcs.
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: conical; inch; NPT; right hand thread
Thread: NPT 1/2"
товару немає в наявності
В кошику
од. на суму грн.
| 00183220 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs.
Material: high speed steel cobalt HSS-E
Kind of thread: right hand thread; TR; trapezoidal
Type of tool: tap - set
Tools application: to the through holes
Thread: Tr 36
Holder socket size - mm: 22mm
Working part length: 68mm
Length: 240mm
Quantity in set/package: 2pcs.
Thread pitch: 3
Kind of holder: hand; square
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs.
Material: high speed steel cobalt HSS-E
Kind of thread: right hand thread; TR; trapezoidal
Type of tool: tap - set
Tools application: to the through holes
Thread: Tr 36
Holder socket size - mm: 22mm
Working part length: 68mm
Length: 240mm
Quantity in set/package: 2pcs.
Thread pitch: 3
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00189150 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; Tr 24; 3; L: 170mm; Holder: square,hand; 14.5mm; 2pcs.
Tools application: to the through holes
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 14.5mm
Working part length: 52mm
Length: 170mm
Thread pitch: 3
Quantity in set/package: 2pcs.
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Thread: Tr 24
Category: Threading Dies and Taps
Description: Tap-set; Tr 24; 3; L: 170mm; Holder: square,hand; 14.5mm; 2pcs.
Tools application: to the through holes
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 14.5mm
Working part length: 52mm
Length: 170mm
Thread pitch: 3
Quantity in set/package: 2pcs.
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Thread: Tr 24
товару немає в наявності
В кошику
од. на суму грн.
| 00189210 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; Tr 32; 6; L: 255mm; Holder: square,hand; 20mm; 3pcs.
Type of tool: tap - set
Thread: Tr 32
Thread pitch: 6
Length: 255mm
Kind of holder: hand; square
Holder socket size - mm: 20mm
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Tools application: to the through holes
Quantity in set/package: 3pcs.
Working part length: 92mm
Category: Threading Dies and Taps
Description: Tap-set; Tr 32; 6; L: 255mm; Holder: square,hand; 20mm; 3pcs.
Type of tool: tap - set
Thread: Tr 32
Thread pitch: 6
Length: 255mm
Kind of holder: hand; square
Holder socket size - mm: 20mm
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Tools application: to the through holes
Quantity in set/package: 3pcs.
Working part length: 92mm
товару немає в наявності
В кошику
од. на суму грн.
| 00189220 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs.
Tools application: to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Thread: Tr 36
Holder socket size - mm: 22mm
Working part length: 68mm
Length: 240mm
Quantity in set/package: 2pcs.
Thread pitch: 3
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 3; L: 240mm; Holder: square,hand; 22mm; 2pcs.
Tools application: to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Thread: Tr 36
Holder socket size - mm: 22mm
Working part length: 68mm
Length: 240mm
Quantity in set/package: 2pcs.
Thread pitch: 3
товару немає в наявності
В кошику
од. на суму грн.
| 00189230 |
|
Виробник: GSR GUSTAV STURSBERG GMBH
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 6; L: 280mm; Holder: square,hand; 22mm; 3pcs.
Type of tool: tap - set
Thread: Tr 36
Thread pitch: 6
Length: 0.28m
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Tools application: to the through holes
Quantity in set/package: 3pcs.
Working part length: 96mm
Category: Threading Dies and Taps
Description: Tap-set; Tr 36; 6; L: 280mm; Holder: square,hand; 22mm; 3pcs.
Type of tool: tap - set
Thread: Tr 36
Thread pitch: 6
Length: 0.28m
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel cobalt HSS-E
Kind of thread: left hand thread; TR; trapezoidal
Tools application: to the through holes
Quantity in set/package: 3pcs.
Working part length: 96mm
товару немає в наявності
В кошику
од. на суму грн.