Результат пошуку "Mhj" : > 60
Обрати Сторінку:
1
2
[ Наступна Сторінка >> ]
Вид перегляду :
Мінімальне замовлення: 3
Мінімальне замовлення: 3
Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MHJ5 | MCMUR | 02+ |
на замовлення 1000 шт: термін постачання 14-28 дні (днів) |
||||||||||
MHJ7 | MCMUR | 02+ |
на замовлення 1000 шт: термін постачання 14-28 дні (днів) |
||||||||||
AD8131ARM HJA | AD |
на замовлення 310 шт: термін постачання 14-28 дні (днів) |
|||||||||||
AD8131ARM HJA | AD | 09+ MSOP-8 |
на замовлення 1310 шт: термін постачання 14-28 дні (днів) |
||||||||||
SPMA101A-MMHJAP |
на замовлення 858 шт: термін постачання 14-28 дні (днів) |
||||||||||||
Светодиодная сетка MH-JG-3-RGB-5V-P50 |
на замовлення 2 шт: термін постачання 2-3 дні (днів) |
||||||||||||
ACJM-MH | AMPHENOL |
Category: Jack connectors Description: Socket; Jack 6,3mm; female; mono; ways: 2; angled 90°; THT; tinned Connector: socket Type of connector: Jack 6,3mm Kind of connector: female Connector variant: mono Number of ways: 2 Spatial orientation: angled 90° Mechanical mounting: for panel mounting Electrical mounting: THT Contact plating: tinned Design: on/off switch кількість в упаковці: 1 шт |
на замовлення 74 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
ACJS-MH | AMPHENOL |
Category: Jack connectors Description: Socket; Jack 6,3mm; female; stereo,with double switch; ways: 3 Connector: socket Type of connector: Jack 6,3mm Kind of connector: female Connector variant: stereo; with double switch Number of ways: 3 Spatial orientation: angled 90° Mechanical mounting: for panel mounting Electrical mounting: THT Contact plating: tinned кількість в упаковці: 1 шт |
на замовлення 465 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KALM-08 MH | IGUS | KALM-08-MH Joints |
на замовлення 8 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KARM-05 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,outside; L: 42mm Thread: M5 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: outside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 8.2mm Thread pitch: 0.8 Material: igumid G Hole diameter: 5mm Length: 42mm кількість в упаковці: 1 шт |
на замовлення 24 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KARM-06 MH | IGUS | KARM-06-MH Joints |
на замовлення 5 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KARM-18 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 18mm; M18; 1.5; right hand thread,outside Length: 96mm Thread: M18 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: outside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 23.2mm Material: igumid G Thread pitch: 1.5 Hole diameter: 18mm кількість в упаковці: 1 шт |
на замовлення 14 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBLM-05 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,inside; igumid G Thread: M5 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; left hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 8.1mm Thread pitch: 0.8 Material: igumid G Hole diameter: 5mm Length: 36mm кількість в упаковці: 1 шт |
на замовлення 10 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBLM-08 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 8mm; M8; 1.25; left hand thread,inside; L: 48mm Material: igumid G Thread: M8 Length: 48mm Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; left hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 12.2mm Thread pitch: 1.25 Hole diameter: 8mm кількість в упаковці: 1 шт |
на замовлення 8 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-03 MH | IGUS | KBRM-03-MH Joints |
на замовлення 25 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-05 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,inside; L: 36mm Thread: M5 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 8.1mm Thread pitch: 0.8 Material: igumid G Hole diameter: 5mm Length: 36mm кількість в упаковці: 1 шт |
на замовлення 3 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-06 MH | IGUS | KBRM-06-MH Joints |
на замовлення 64 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-08 MH | IGUS | KBRM-08-MH Joints |
на замовлення 11 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-10 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,inside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.25 Material: igumid G Hole diameter: 10mm Length: 58mm кількість в упаковці: 1 шт |
на замовлення 1 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-10 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,inside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.5 Material: igumid G Hole diameter: 10mm Length: 58mm кількість в упаковці: 1 шт |
на замовлення 9 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
KBRM-12 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,inside Version: with stainless steel sleeve Hole diameter: 12mm Tip width: 16.2mm Type of mounting element: ball joint Kind of thread: inside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M12 Thread pitch: 1.25 ISO standard: ISO 12240 Length: 67mm кількість в упаковці: 1 шт |
на замовлення 4 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
Зажим HJKT1 2044A Код товару: 154590 |
Різні комплектуючі > Різні комплектуючі 3 |
товар відсутній
|
|||||||||||
KALM-05 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,outside; L: 42mm Thread: M5 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: left hand thread; outside Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 8.2mm Thread pitch: 0.8 Material: igumid G Hole diameter: 5mm Length: 42mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-06 MH | IGUS | KALM-06-MH Joints |
товар відсутній |
||||||||||
KALM-10 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,outside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: left hand thread; outside Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.25 Material: igumid G Hole diameter: 10mm Length: 63mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-10 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,outside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: left hand thread; outside Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.5 Material: igumid G Hole diameter: 10mm Length: 63mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-12 F MH | IGUS | KALM-12-F-MH Joints |
товар відсутній |
||||||||||
KALM-12 MH | IGUS | KALM-12-MH Joints |
товар відсутній |
||||||||||
KALM-14 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,outside; L: 79mm Version: with stainless steel sleeve Length: 79mm ISO standard: ISO 12240 Hole diameter: 14mm Tip width: 19.2mm Type of mounting element: ball joint Kind of thread: left hand thread; outside Material: igumid G Internal parts material: iglidur® W300 Thread: M14 Thread pitch: 2 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-16 F MH | IGUS | KALM-16-F-MH Joints |
товар відсутній |
||||||||||
KALM-16 MH | IGUS | KALM-16-MH Joints |
товар відсутній |
||||||||||
KALM-18 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,outside Length: 96mm Thread: M18 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: left hand thread; outside Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 23.2mm Material: igumid G Thread pitch: 1.5 Hole diameter: 18mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-20 M20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,outside Length: 104mm Version: with stainless steel sleeve Thread pitch: 2.5 ISO standard: ISO 12240 Hole diameter: 20mm Tip width: 25.2mm Type of mounting element: ball joint Kind of thread: left hand thread; outside Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KALM-20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,outside Version: with stainless steel sleeve Thread pitch: 1.5 ISO standard: ISO 12240 Length: 104mm Hole diameter: 20mm Tip width: 25.2mm Type of mounting element: ball joint Kind of thread: left hand thread; outside Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-08 MH | IGUS | KARM-08-MH Joints |
товар відсутній |
||||||||||
KARM-10 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,outside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: outside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.25 Material: igumid G Hole diameter: 10mm Length: 63mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-10 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,outside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: outside; right hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.5 Material: igumid G Hole diameter: 10mm Length: 63mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-12 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,outside Version: with stainless steel sleeve Hole diameter: 12mm Tip width: 16.2mm Type of mounting element: ball joint Kind of thread: outside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M12 Thread pitch: 1.25 ISO standard: ISO 12240 Length: 71mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-12 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,outside Version: with stainless steel sleeve Hole diameter: 12mm Tip width: 16.2mm Type of mounting element: ball joint Kind of thread: outside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M12 Thread pitch: 1.75 ISO standard: ISO 12240 Length: 71mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-14 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,outside; L: 79mm Version: with stainless steel sleeve Length: 79mm ISO standard: ISO 12240 Hole diameter: 14mm Tip width: 19.2mm Type of mounting element: ball joint Kind of thread: outside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M14 Thread pitch: 2 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-16 F MH | IGUS | KARM-16-F-MH Joints |
товар відсутній |
||||||||||
KARM-16 MH | IGUS | KARM-16-MH Joints |
товар відсутній |
||||||||||
KARM-20 M20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 2.5; right hand thread,outside Length: 104mm Version: with stainless steel sleeve Thread pitch: 2.5 ISO standard: ISO 12240 Hole diameter: 20mm Tip width: 25.2mm Type of mounting element: ball joint Kind of thread: outside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KARM-20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 1.5; right hand thread,outside Version: with stainless steel sleeve Thread pitch: 1.5 ISO standard: ISO 12240 Length: 104mm Hole diameter: 20mm Tip width: 25.2mm Type of mounting element: ball joint Kind of thread: outside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-03 MH | IGUS | KBLM-03-MH Joints |
товар відсутній |
||||||||||
KBLM-05 M4 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M4; 0.7; left hand thread,inside; igumid G Type of mounting element: ball joint Version: with stainless steel sleeve Thread pitch: 0.7 Thread: M4 Length: 36mm Material: igumid G ISO standard: ISO 12240 Kind of thread: inside; left hand thread Hole diameter: 5mm Internal parts material: iglidur® W300 Tip width: 8.1mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-06 MH | IGUS | KBLM-06-MH Joints |
товар відсутній |
||||||||||
KBLM-10 F MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,inside Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; left hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.25 Material: igumid G Hole diameter: 10mm Length: 58mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-10 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,inside; L: 58mm Thread: M10 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; left hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 14.2mm Thread pitch: 1.5 Material: igumid G Hole diameter: 10mm Length: 58mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-12 F MH | IGUS | KBLM-12-F-MH Joints |
товар відсутній |
||||||||||
KBLM-12 MH | IGUS | KBLM-12-MH Joints |
товар відсутній |
||||||||||
KBLM-14 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,inside; igumid G Version: with stainless steel sleeve Length: 76mm ISO standard: ISO 12240 Hole diameter: 14mm Tip width: 19.2mm Type of mounting element: ball joint Kind of thread: inside; left hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M14 Thread pitch: 2 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-16 F MH | IGUS | KBLM-16-F-MH Joints |
товар відсутній |
||||||||||
KBLM-16 MH | IGUS | KBLM-16-MH Joints |
товар відсутній |
||||||||||
KBLM-18 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,inside; L: 94mm Length: 94mm Thread: M18 Version: with stainless steel sleeve Type of mounting element: ball joint Kind of thread: inside; left hand thread Internal parts material: iglidur® W300 ISO standard: ISO 12240 Tip width: 23.2mm Material: igumid G Thread pitch: 1.5 Hole diameter: 18mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-20 M20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,inside Length: 102mm Version: with stainless steel sleeve Thread pitch: 2.5 ISO standard: ISO 12240 Hole diameter: 20mm Tip width: 25.3mm Type of mounting element: ball joint Kind of thread: inside; left hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBLM-20 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,inside Version: with stainless steel sleeve Thread pitch: 1.5 ISO standard: ISO 12240 Length: 102mm Hole diameter: 20mm Tip width: 25.3mm Type of mounting element: ball joint Kind of thread: inside; left hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M20 кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBRM-05 M4 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 5mm; M5; 0.7; right hand thread,inside; L: 36mm Type of mounting element: ball joint Version: with stainless steel sleeve Thread pitch: 0.7 Thread: M5 Length: 36mm Material: igumid G ISO standard: ISO 12240 Kind of thread: inside; right hand thread Hole diameter: 5mm Internal parts material: iglidur® W300 Tip width: 8.1mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBRM-12 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,inside Version: with stainless steel sleeve Hole diameter: 12mm Tip width: 16.2mm Type of mounting element: ball joint Kind of thread: inside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M12 Thread pitch: 1.75 ISO standard: ISO 12240 Length: 67mm кількість в упаковці: 1 шт |
товар відсутній |
||||||||||
KBRM-14 MH | IGUS |
Category: Joints Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,inside; L: 76mm Version: with stainless steel sleeve Length: 76mm ISO standard: ISO 12240 Hole diameter: 14mm Tip width: 19.2mm Type of mounting element: ball joint Kind of thread: inside; right hand thread Material: igumid G Internal parts material: iglidur® W300 Thread: M14 Thread pitch: 2 кількість в упаковці: 1 шт |
товар відсутній |
ACJM-MH |
Виробник: AMPHENOL
Category: Jack connectors
Description: Socket; Jack 6,3mm; female; mono; ways: 2; angled 90°; THT; tinned
Connector: socket
Type of connector: Jack 6,3mm
Kind of connector: female
Connector variant: mono
Number of ways: 2
Spatial orientation: angled 90°
Mechanical mounting: for panel mounting
Electrical mounting: THT
Contact plating: tinned
Design: on/off switch
кількість в упаковці: 1 шт
Category: Jack connectors
Description: Socket; Jack 6,3mm; female; mono; ways: 2; angled 90°; THT; tinned
Connector: socket
Type of connector: Jack 6,3mm
Kind of connector: female
Connector variant: mono
Number of ways: 2
Spatial orientation: angled 90°
Mechanical mounting: for panel mounting
Electrical mounting: THT
Contact plating: tinned
Design: on/off switch
кількість в упаковці: 1 шт
на замовлення 74 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
3+ | 100.4 грн |
5+ | 85.58 грн |
17+ | 59.93 грн |
45+ | 56.6 грн |
ACJS-MH |
Виробник: AMPHENOL
Category: Jack connectors
Description: Socket; Jack 6,3mm; female; stereo,with double switch; ways: 3
Connector: socket
Type of connector: Jack 6,3mm
Kind of connector: female
Connector variant: stereo; with double switch
Number of ways: 3
Spatial orientation: angled 90°
Mechanical mounting: for panel mounting
Electrical mounting: THT
Contact plating: tinned
кількість в упаковці: 1 шт
Category: Jack connectors
Description: Socket; Jack 6,3mm; female; stereo,with double switch; ways: 3
Connector: socket
Type of connector: Jack 6,3mm
Kind of connector: female
Connector variant: stereo; with double switch
Number of ways: 3
Spatial orientation: angled 90°
Mechanical mounting: for panel mounting
Electrical mounting: THT
Contact plating: tinned
кількість в упаковці: 1 шт
на замовлення 465 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
3+ | 96.82 грн |
5+ | 84.71 грн |
17+ | 59.93 грн |
45+ | 56.6 грн |
KALM-08 MH |
Виробник: IGUS
KALM-08-MH Joints
KALM-08-MH Joints
на замовлення 8 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 640.07 грн |
3+ | 459.5 грн |
6+ | 434.52 грн |
KARM-05 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,outside; L: 42mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.2mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 42mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,outside; L: 42mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.2mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 42mm
кількість в упаковці: 1 шт
на замовлення 24 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 606 грн |
3+ | 446.05 грн |
7+ | 406.22 грн |
KARM-06 MH |
Виробник: IGUS
KARM-06-MH Joints
KARM-06-MH Joints
на замовлення 5 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 627.52 грн |
3+ | 452 грн |
6+ | 427.03 грн |
KARM-18 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; right hand thread,outside
Length: 96mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; right hand thread,outside
Length: 96mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
на замовлення 14 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 967.27 грн |
2+ | 712.29 грн |
4+ | 648.45 грн |
KBLM-05 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,inside; igumid G
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.1mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 36mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,inside; igumid G
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.1mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 36mm
кількість в упаковці: 1 шт
на замовлення 10 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 770.05 грн |
2+ | 510.88 грн |
6+ | 464.49 грн |
KBLM-08 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 8mm; M8; 1.25; left hand thread,inside; L: 48mm
Material: igumid G
Thread: M8
Length: 48mm
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 12.2mm
Thread pitch: 1.25
Hole diameter: 8mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 8mm; M8; 1.25; left hand thread,inside; L: 48mm
Material: igumid G
Thread: M8
Length: 48mm
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 12.2mm
Thread pitch: 1.25
Hole diameter: 8mm
кількість в упаковці: 1 шт
на замовлення 8 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 814.87 грн |
2+ | 540.27 грн |
6+ | 491.96 грн |
KBRM-03 MH |
Виробник: IGUS
KBRM-03-MH Joints
KBRM-03-MH Joints
на замовлення 25 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 632.89 грн |
3+ | 448.67 грн |
6+ | 424.53 грн |
KBRM-05 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,inside; L: 36mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.1mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 36mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; right hand thread,inside; L: 36mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.1mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 36mm
кількість в упаковці: 1 шт
на замовлення 3 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 683.1 грн |
2+ | 503.1 грн |
6+ | 457.83 грн |
KBRM-06 MH |
Виробник: IGUS
KBRM-06-MH Joints
KBRM-06-MH Joints
на замовлення 64 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 597.93 грн |
3+ | 424.53 грн |
7+ | 401.23 грн |
KBRM-08 MH |
Виробник: IGUS
KBRM-08-MH Joints
KBRM-08-MH Joints
на замовлення 11 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 725.23 грн |
2+ | 514.44 грн |
6+ | 486.97 грн |
KBRM-10 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
на замовлення 1 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 784.4 грн |
2+ | 585.22 грн |
5+ | 532.75 грн |
KBRM-10 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
на замовлення 9 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 784.4 грн |
2+ | 578.31 грн |
5+ | 526.09 грн |
KBRM-12 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,inside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.25
ISO standard: ISO 12240
Length: 67mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,inside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.25
ISO standard: ISO 12240
Length: 67mm
кількість в упаковці: 1 шт
на замовлення 4 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 899.14 грн |
2+ | 662.16 грн |
5+ | 602.67 грн |
KALM-05 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,outside; L: 42mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.2mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 42mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.8; left hand thread,outside; L: 42mm
Thread: M5
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 8.2mm
Thread pitch: 0.8
Material: igumid G
Hole diameter: 5mm
Length: 42mm
кількість в упаковці: 1 шт
товар відсутній
KALM-10 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
товар відсутній
KALM-10 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
товар відсутній
KALM-14 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,outside; L: 79mm
Version: with stainless steel sleeve
Length: 79mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,outside; L: 79mm
Version: with stainless steel sleeve
Length: 79mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
товар відсутній
KALM-18 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,outside
Length: 96mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,outside
Length: 96mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
товар відсутній
KALM-20 M20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,outside
Length: 104mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,outside
Length: 104mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KALM-20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,outside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 104mm
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,outside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 104mm
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: left hand thread; outside
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KARM-10 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; right hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
товар відсутній
KARM-10 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; right hand thread,outside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 63mm
кількість в упаковці: 1 шт
товар відсутній
KARM-12 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,outside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.25
ISO standard: ISO 12240
Length: 71mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.25; right hand thread,outside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.25
ISO standard: ISO 12240
Length: 71mm
кількість в упаковці: 1 шт
товар відсутній
KARM-12 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,outside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.75
ISO standard: ISO 12240
Length: 71mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,outside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.75
ISO standard: ISO 12240
Length: 71mm
кількість в упаковці: 1 шт
товар відсутній
KARM-14 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,outside; L: 79mm
Version: with stainless steel sleeve
Length: 79mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,outside; L: 79mm
Version: with stainless steel sleeve
Length: 79mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
товар відсутній
KARM-20 M20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; right hand thread,outside
Length: 104mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; right hand thread,outside
Length: 104mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KARM-20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; right hand thread,outside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 104mm
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; right hand thread,outside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 104mm
Hole diameter: 20mm
Tip width: 25.2mm
Type of mounting element: ball joint
Kind of thread: outside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KBLM-05 M4 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M4; 0.7; left hand thread,inside; igumid G
Type of mounting element: ball joint
Version: with stainless steel sleeve
Thread pitch: 0.7
Thread: M4
Length: 36mm
Material: igumid G
ISO standard: ISO 12240
Kind of thread: inside; left hand thread
Hole diameter: 5mm
Internal parts material: iglidur® W300
Tip width: 8.1mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M4; 0.7; left hand thread,inside; igumid G
Type of mounting element: ball joint
Version: with stainless steel sleeve
Thread pitch: 0.7
Thread: M4
Length: 36mm
Material: igumid G
ISO standard: ISO 12240
Kind of thread: inside; left hand thread
Hole diameter: 5mm
Internal parts material: iglidur® W300
Tip width: 8.1mm
кількість в упаковці: 1 шт
товар відсутній
KBLM-10 F MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.25; left hand thread,inside
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.25
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
товар відсутній
KBLM-10 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,inside; L: 58mm
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 10mm; M10; 1.5; left hand thread,inside; L: 58mm
Thread: M10
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 14.2mm
Thread pitch: 1.5
Material: igumid G
Hole diameter: 10mm
Length: 58mm
кількість в упаковці: 1 шт
товар відсутній
KBLM-14 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,inside; igumid G
Version: with stainless steel sleeve
Length: 76mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; left hand thread,inside; igumid G
Version: with stainless steel sleeve
Length: 76mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
товар відсутній
KBLM-18 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,inside; L: 94mm
Length: 94mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 18mm; M18; 1.5; left hand thread,inside; L: 94mm
Length: 94mm
Thread: M18
Version: with stainless steel sleeve
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Internal parts material: iglidur® W300
ISO standard: ISO 12240
Tip width: 23.2mm
Material: igumid G
Thread pitch: 1.5
Hole diameter: 18mm
кількість в упаковці: 1 шт
товар відсутній
KBLM-20 M20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,inside
Length: 102mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.3mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 2.5; left hand thread,inside
Length: 102mm
Version: with stainless steel sleeve
Thread pitch: 2.5
ISO standard: ISO 12240
Hole diameter: 20mm
Tip width: 25.3mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KBLM-20 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,inside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 102mm
Hole diameter: 20mm
Tip width: 25.3mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 20mm; M20; 1.5; left hand thread,inside
Version: with stainless steel sleeve
Thread pitch: 1.5
ISO standard: ISO 12240
Length: 102mm
Hole diameter: 20mm
Tip width: 25.3mm
Type of mounting element: ball joint
Kind of thread: inside; left hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M20
кількість в упаковці: 1 шт
товар відсутній
KBRM-05 M4 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.7; right hand thread,inside; L: 36mm
Type of mounting element: ball joint
Version: with stainless steel sleeve
Thread pitch: 0.7
Thread: M5
Length: 36mm
Material: igumid G
ISO standard: ISO 12240
Kind of thread: inside; right hand thread
Hole diameter: 5mm
Internal parts material: iglidur® W300
Tip width: 8.1mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 5mm; M5; 0.7; right hand thread,inside; L: 36mm
Type of mounting element: ball joint
Version: with stainless steel sleeve
Thread pitch: 0.7
Thread: M5
Length: 36mm
Material: igumid G
ISO standard: ISO 12240
Kind of thread: inside; right hand thread
Hole diameter: 5mm
Internal parts material: iglidur® W300
Tip width: 8.1mm
кількість в упаковці: 1 шт
товар відсутній
KBRM-12 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,inside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.75
ISO standard: ISO 12240
Length: 67mm
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 12mm; M12; 1.75; right hand thread,inside
Version: with stainless steel sleeve
Hole diameter: 12mm
Tip width: 16.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M12
Thread pitch: 1.75
ISO standard: ISO 12240
Length: 67mm
кількість в упаковці: 1 шт
товар відсутній
KBRM-14 MH |
Виробник: IGUS
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,inside; L: 76mm
Version: with stainless steel sleeve
Length: 76mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
Category: Joints
Description: Ball joint; Øhole: 14mm; M14; 2; right hand thread,inside; L: 76mm
Version: with stainless steel sleeve
Length: 76mm
ISO standard: ISO 12240
Hole diameter: 14mm
Tip width: 19.2mm
Type of mounting element: ball joint
Kind of thread: inside; right hand thread
Material: igumid G
Internal parts material: iglidur® W300
Thread: M14
Thread pitch: 2
кількість в упаковці: 1 шт
товар відсутній
Обрати Сторінку:
1
2
[ Наступна Сторінка >> ]