Продукція > BRO
| Назва | Виробник | Інформація | Доступність | Ціна | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BRO | TI | 09+ | на замовлення 256 шт: термін постачання 14-28 дні (днів) | В кошику од. на суму грн. | ||||||||
| BRO-B004-00015 | BROQUETAS | Category: Fluxes Description: Flux: rosin-free; liquid; bottle; 15ml; colourless Applications of soldering equipment: reworking and repairing of circuit boards; wave soldering Colour: colourless Signal word: Warning Standard equipment: fine brush Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble GHS Code: GHS07 Hazard statements: H317: May cause an allergic skin reaction. Appearance: liquid Flux residues: transparent; yes Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ... Type of flux: rosin-free Soldering equipment features: can be washed down with water based agents; water based Capacity: 15ml Kind of package: bottle | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BRO.SEQUAD.900330/21-33384-51 | Amphenol | BRO.SEQUAD.900330/21-33384-51 | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BRO150 | Brady Corporation | Description: (BSC-O) BRO150, ROLL, 30"X150',H | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BRO152 | Brady Corporation | Description: (BSC-O) BRO152, ROLL, 15"X150',H | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BROF60-07/05H Припій; Sn60Pb40; дріт; 0,7 мм; 500г; Флюс: F-SW26,No Clean Код товару: 109202
Додати до обраних
Обраний товар
| Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Припій | товару немає в наявності | В кошику од. на суму грн. | |||||||||
| BROF60-10/01H Код товару: 62036
Додати до обраних
Обраний товар
| Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Припій Опис: Для м'якого паяння, галогеновий, з каніфоллю, F-SW26, No Clean Вага/Об’єм/К-сть: 100 g Діаметр: 1 mm | товару немає в наявності |
| |||||||||
| BROF63-05/025H (Припій; Sn63Pb37; дріт; 0,5мм; 250г; Флюс: No Clean) Код товару: 119093
Додати до обраних
Обраний товар
| Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Припій | товару немає в наявності | В кошику од. на суму грн. | |||||||||
| BROFIL 60 B2.1 0,8 MM 100 G | BROQUETAS | BROF60-08/01H Solder wires - lead based | на замовлення 18 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0,8 MM 1000 G | BROQUETAS | BROF60-08/10H Solder wires - lead based | на замовлення 15 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0,8 MM 250 G | BROQUETAS | BROF60-08/025H Solder wires - lead based | на замовлення 37 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0,8 MM 500 G | BROQUETAS | BROF60-08/05H Solder wires - lead based | на замовлення 15 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.5mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 96 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.5mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 96 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0.7MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.7mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.7mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 112 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 0.7MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 0.7mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 0.7mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 112 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.2MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 11 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.2MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 11 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.2MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 0.25kg; reel; 183÷190°C Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 45 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.2MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.2mm; 0.25kg; reel; 183÷190°C Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 45 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 74 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 74 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 1KG | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 23 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 1KG | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 1kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 23 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.25kg; reel; 183÷190°C Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 50 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.25kg; reel; 183÷190°C Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 50 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.5kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 16 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 1.5MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 1.5mm; 0.5kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 1.5mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 16 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 2.0MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 0.25kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 53 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 2.0MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 0.25kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.25kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 53 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 2.0MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 0.5kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 | на замовлення 66 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 2.0MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn60Pb40; 2mm; 0.5kg; reel; 183÷190°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Appearance: soldering wire Alloy composition: Sn60Pb40 Diameter: 2mm Binder weight: 0.5kg Kind of package: reel Melting point: 183...190°C Kind of flux: halide; No Clean; ROM1; rosin Version: for soft soldering Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Flux name: SW26 Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Flux residues: non-corrosive; yes GHS Code: GHS07; GHS08 Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 кількість в упаковці: 1 шт | на замовлення 66 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 3.0MM 250G | BROQUETAS | BROF60-30/025H Solder wires - lead based | на замовлення 7 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 60 B2.1 3.0MM 500G | BROQUETAS | BROF60-30/05H Solder wires - lead based | на замовлення 28 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 58 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 58 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 17 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 17 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 11 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.5MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.5mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.5mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 11 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 27 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 27 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 54 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 54 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 22 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.7MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.7mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.7mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 22 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 1000G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 1000g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 16 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 1000G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 1000g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 16 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 17 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 17 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 18 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 18 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 15 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 0.8MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 0.8mm; 500g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 0.8mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 15 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 85 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 100G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 100g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.1kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 85 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 26 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 250G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 250g; reel; 183°C; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.25kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 26 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 500g; reel; 183°C; 2.5%; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Flux content: 2.5% Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes кількість в упаковці: 1 шт | на замовлення 14 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROFIL 63 B2.1 1.0MM 500G | BROQUETAS | Category: Solder wires - lead based Description: Tin; lead-based; Sn63Pb37; 1mm; 500g; reel; 183°C; 2.5%; Flux: SW26 Type of solder: tin Kind of solder: lead-based Alloy composition: Sn63Pb37 Binder weight: 0.5kg Appearance: soldering wire Application: in the electronics industry Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use. Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ... Version: for soft soldering GHS Code: GHS07; GHS08 Kind of flux: halide; No Clean; ROM1; rosin Flux name: SW26 Diameter: 1mm Flux content: 2.5% Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004 Kind of package: reel Melting point: 183°C Flux residues: non-corrosive; yes | на замовлення 14 шт: термін постачання 21-30 дні (днів) |
| ||||||||
| BROKER BUY PPV FOR 5 POS | Logic Product Development | Expedite Fee | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BRON2S5NO43 | DELTA PLUS | DEL-BRONZE2S5SRA43 Leg protection | на замовлення 5 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BRON2S5NO44 | DELTA PLUS | DEL-BRONZE2S5SRA44 Leg protection | на замовлення 1 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BRON2S5NO45 | DELTA PLUS | DEL-BRONZE2S5SRA45 Leg protection | на замовлення 2 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BRON2S5NO46 | DELTA PLUS | DEL-BRONZE2S5SRA46 Leg protection | на замовлення 4 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BRON2S5NO47 | DELTA PLUS | DEL-BRONZE2S5SRA47 Leg protection | на замовлення 4 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BRON2S5NO48 | DELTA PLUS | DEL-BRONZE2S5SRA48 Leg protection | на замовлення 4 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROOKE-SCR-M C12083 Код товару: 45215
Додати до обраних
Обраний товар
| LEDIL | Світлодіоди > Лінзи, тримачі, оправлення для світлодіодів Опис: Отражатель для светодиода CXA2011; форма: круг; угол излучения: 31° | товару немає в наявності |
| ||||||||
| BROOKE-SCR-W C12084 Код товару: 45216
Додати до обраних
Обраний товар
| LEDIL | Світлодіоди > Лінзи, тримачі, оправлення для світлодіодів Опис: Отражатель для светодиода CXA2011; форма: круг; угол излучения: 46° | товару немає в наявності |
| ||||||||
| BROOKS3NO45 | DELTA PLUS | DEL-BROOKS3NO45 Leg protection | на замовлення 2 шт: термін постачання 7-14 дні (днів) |
| ||||||||
| BROSE10702B | на замовлення 98 шт: термін постачання 14-28 дні (днів) | В кошику од. на суму грн. | ||||||||||
| BROSFP-2MLX-15-C | Amphenol ProLabs | Fibre Optic Transmitters, Receivers, Transceivers Brocade BROSFP-2MLX-15 Compatible TAA Compliant 2GBase-LW Fibre Channel SFP Transceiver (SMF, 1310nm, 10km, LC) | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BROSFP-2MLX-15-C | ProLabs | Description: Brocade BROSFP-2MLX-15 Compatibl Packaging: Retail Package Part Status: Active | на замовлення 95683 шт: термін постачання 21-31 дні (днів) |
| ||||||||
| BROSFP-2MLX-40-C | ProLabs | Description: Brocade BROSFP-2MLX-40 Compatibl Packaging: Retail Package Part Status: Active | на замовлення 347 шт: термін постачання 21-31 дні (днів) |
| ||||||||
| BROSFP-2MLX-40-C | Amphenol ProLabs | Fibre Optic Transmitters, Receivers, Transceivers Brocade BROSFP-2MLX-40 Compatible TAA Compliant 2GBase-LW Fibre Channel SFP Transceiver (SMF, 1310nm, 40km, LC) | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BROSFP-2MSX-C | ProLabs | Description: Brocade BROSFP-2MSX Compatible T Packaging: Retail Package Part Status: Active | на замовлення 7762 шт: термін постачання 21-31 дні (днів) |
| ||||||||
| BROSFP-2MSX-C | Amphenol ProLabs | Fibre Optic Transmitters, Receivers, Transceivers Brocade BROSFP-2MSX Compatible TAA Compliant 2GBase-SW Fibre Channel SFP Transceiver (MMF, 850nm, 550m, LC) | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| BROSFP-4MLX10-C | ATGBICS | Description: 4GBASE-LW SFP 1310nm 4km Packaging: Tray Connector Type: LC Wavelength: 1310nm Mounting Type: Pluggable, SFP+ Voltage - Supply: 3.3V Applications: Ethernet Data Rate: 4Gbps | на замовлення 4847 шт: термін постачання 21-31 дні (днів) |
|