Продукція > SMT ELECTRONIC TECHNOLOGY > Всі товари виробника SMT ELECTRONIC TECHNOLOGY (43) > Сторінка 1 з 1
| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
HT-105 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools - Others Description: Tool: for crimping Type of tool: for crimping Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100 Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves Length: 0.15m Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector |
на замовлення 97 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +3 |
HT-109 | SMT ELECTRONIC TECHNOLOGY |
Category: Cutting Pliers Description: Pliers; cutting; 125mm; without chamfer Type of tool: pliers Pliers length: 125mm Kind of pliers: cutting Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring Kind of cut: without chamfer |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
 +4 |
HT-1091 | SMT ELECTRONIC TECHNOLOGY |
Category: Cutting Pliers Description: Pliers; cutting; 125mm; without chamfer Type of tool: pliers Pliers length: 125mm Kind of pliers: cutting Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring Kind of cut: without chamfer |
на замовлення 103 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +4 |
HT-202B | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Type of tool: for crimping Related items: 0969; DHPS; HDP20; HDP22 Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors Length: 185mm Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors) Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors) |
на замовлення 104 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-2081 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools - Others Description: Tool: for crimping; cable ties Type of tool: for crimping Crimp tool application: cable ties Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07 Crimp tool features: facilitate tie tightening and superfluous end cutting |
на замовлення 3 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-2092C | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Tool material: steel Crimp tool application: RJ50 (10p10c) connectors Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock Length: 0.2m |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
 +4 |
HT-225D | SMT ELECTRONIC TECHNOLOGY |
 Category: Crimping Tools for TerminalsDescription: Tool: for crimping; non-insulated terminals Type of tool: for crimping Related items: 0969; DHPS; HDP20; HDP22; V35 Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously Tool material: carbon steel Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors Length: 210mm Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors) Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors) |
на замовлення 26 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +4 |
HT-236C | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Type of tool: for crimping Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2 Tool material: carbon steel Crimp tool application: non-insulated terminals Length: 0.22m |
на замовлення 184 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +4 |
HT-236U | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2 Length: 0.22m Wire cross-section: 0.32...2mm2 Wire size: 22AWG...14AWG Type of tool: for crimping Tool material: carbon steel Crimp tool application: terminals D-Sub connectors; terminals V35 connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Related items: 0969; DHPS; HDP20; HDP22; V35 |
на замовлення 60 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +1 |
HT-268K | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Kit: for RJ plug crimping; 205mm Type of tools set: for RJ plug crimping Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping Package dimensions: 305x240x60mm Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock Crimp tool length: 205mm Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs |
на замовлення 10 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-322 | SMT ELECTRONIC TECHNOLOGY |
Category: Strippers for wire & cable Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6 Type of tool: stripping tool Kind of wire: RG6; RG58; RG59 Tool material: plastic Kind of stripping wire: coaxial Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis |
на замовлення 31 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-330K | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm Type of tools set: for colaxial connector crimping Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies Kind of package: case Package dimensions: 305x235x60mm Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm Crimp tool length: 220mm Pliers length: 165mm Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913 |
на замовлення 50 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-332 | SMT ELECTRONIC TECHNOLOGY |
Category: Strippers for wire & cable Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62 Type of tool: stripping tool Kind of wire: RG6; RG58; RG59; RG62 Tool material: plastic Length: 99mm Kind of stripping wire: coaxial Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis |
на замовлення 40 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +4 |
HT-336D2 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm Type of tool: for crimping Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213 Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Length: 0.22m Tool material: carbon steel |
на замовлення 38 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-336F2 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58 Kind of wire: B8218; RG58 Type of tool: for crimping Tool material: carbon steel Crimp tool application: SMA connectors; SMB connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm Length: 0.22m |
на замовлення 85 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-336G | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; carbon steel; 220mm Length: 0.22m Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400 Type of tool: for crimping Tool material: carbon steel Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools |
на замовлення 84 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-336J | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; carbon steel; 220mm Type of tool: for crimping Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316 Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm Tool material: carbon steel Length: 0.22m Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools |
на замовлення 14 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 +4 |
HT-504 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Length: 320mm Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2 Type of tool: for crimping Tool material: steel Crimp tool application: non-insulated terminals Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle |
на замовлення 13 шт: термін постачання 21-30 дні (днів) |
|
||||||||
 |
HT-568R | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Tool material: steel Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Length: 190mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
|
HT-105 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools - Others Description: Tool: for crimping Type of tool: for crimping Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100 Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves Length: 0.15m Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector кількість в упаковці: 1 шт |
на замовлення 97 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+3 |
HT-109 | SMT ELECTRONIC TECHNOLOGY |
Category: Cutting Pliers Description: Pliers; cutting; 125mm; without chamfer Type of tool: pliers Pliers length: 125mm Kind of pliers: cutting Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring Kind of cut: without chamfer кількість в упаковці: 1 шт |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
+4 |
HT-1091 | SMT ELECTRONIC TECHNOLOGY |
Category: Cutting Pliers Description: Pliers; cutting; 125mm; without chamfer Type of tool: pliers Pliers length: 125mm Kind of pliers: cutting Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring Kind of cut: without chamfer кількість в упаковці: 1 шт |
на замовлення 103 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+4 |
HT-202B | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Type of tool: for crimping Related items: 0969; DHPS; HDP20; HDP22 Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors Length: 185mm Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors) Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors) кількість в упаковці: 1 шт |
на замовлення 104 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-2081 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools - Others Description: Tool: for crimping; cable ties Type of tool: for crimping Crimp tool application: cable ties Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07 Crimp tool features: facilitate tie tightening and superfluous end cutting кількість в упаковці: 1 шт |
на замовлення 3 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-2092C | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Tool material: steel Crimp tool application: RJ50 (10p10c) connectors Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock Length: 0.2m кількість в упаковці: 1 шт |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
+4 |
HT-225D | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Type of tool: for crimping Related items: 0969; DHPS; HDP20; HDP22; V35 Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously Tool material: carbon steel Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors Length: 210mm Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors) Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors) кількість в упаковці: 1 шт |
на замовлення 26 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+4 |
HT-236C | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Type of tool: for crimping Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2 Tool material: carbon steel Crimp tool application: non-insulated terminals Length: 0.22m кількість в упаковці: 1 шт |
на замовлення 184 шт: термін постачання 14-21 дні (днів) |
|
||||||||
| HT-236E1 | SMT ELECTRONIC TECHNOLOGY | HT-336S/SZ Crimping Tools - Others |
на замовлення 44 шт: термін постачання 14-21 дні (днів) |
|
|||||||||
| HT-236N | SMT ELECTRONIC TECHNOLOGY | HT-336N Crimping Tools for Terminals |
на замовлення 52 шт: термін постачання 14-21 дні (днів) |
|
|||||||||
| HT-236Q1 | SMT ELECTRONIC TECHNOLOGY | HT-336Q Crimping Tools for RJ Plugs |
на замовлення 28 шт: термін постачання 14-21 дні (днів) |
|
|||||||||
|
+4 |
HT-236U | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2 Length: 0.22m Wire cross-section: 0.32...2mm2 Wire size: 22AWG...14AWG Type of tool: for crimping Tool material: carbon steel Crimp tool application: terminals D-Sub connectors; terminals V35 connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Related items: 0969; DHPS; HDP20; HDP22; V35 кількість в упаковці: 1 шт |
на замовлення 60 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+1 |
HT-268K | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Kit: for RJ plug crimping; 205mm Type of tools set: for RJ plug crimping Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping Package dimensions: 305x240x60mm Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock Crimp tool length: 205mm Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs кількість в упаковці: 1 шт |
на замовлення 10 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-322 | SMT ELECTRONIC TECHNOLOGY |
Category: Strippers for wire & cable Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6 Type of tool: stripping tool Kind of wire: RG6; RG58; RG59 Tool material: plastic Kind of stripping wire: coaxial Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis кількість в упаковці: 1 шт |
на замовлення 31 шт: термін постачання 14-21 дні (днів) |
|
||||||||
| HT-325 | SMT ELECTRONIC TECHNOLOGY | HT-325 Strippers for wire & cable |
на замовлення 69 шт: термін постачання 14-21 дні (днів) |
|
|||||||||
|
|
HT-330K | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm Type of tools set: for colaxial connector crimping Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies Kind of package: case Package dimensions: 305x235x60mm Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm Crimp tool length: 220mm Pliers length: 165mm Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913 кількість в упаковці: 1 шт |
на замовлення 50 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-332 | SMT ELECTRONIC TECHNOLOGY |
Category: Strippers for wire & cable Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62 Type of tool: stripping tool Kind of wire: RG6; RG58; RG59; RG62 Tool material: plastic Length: 99mm Kind of stripping wire: coaxial Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis кількість в упаковці: 1 шт |
на замовлення 40 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+4 |
HT-336D2 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm Type of tool: for crimping Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213 Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Length: 0.22m Tool material: carbon steel кількість в упаковці: 1 шт |
на замовлення 38 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-336F2 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58 Kind of wire: B8218; RG58 Type of tool: for crimping Tool material: carbon steel Crimp tool application: SMA connectors; SMB connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm Length: 0.22m кількість в упаковці: 1 шт |
на замовлення 85 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-336G | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; carbon steel; 220mm Length: 0.22m Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400 Type of tool: for crimping Tool material: carbon steel Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools кількість в упаковці: 1 шт |
на замовлення 84 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-336J | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; carbon steel; 220mm Type of tool: for crimping Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316 Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm Tool material: carbon steel Length: 0.22m Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools кількість в упаковці: 1 шт |
на замовлення 14 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
+4 |
HT-504 | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals Length: 320mm Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2 Type of tool: for crimping Tool material: steel Crimp tool application: non-insulated terminals Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle кількість в упаковці: 1 шт |
на замовлення 13 шт: термін постачання 14-21 дні (днів) |
|
||||||||
|
|
HT-568R | SMT ELECTRONIC TECHNOLOGY |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Tool material: steel Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Length: 190mm кількість в упаковці: 1 шт |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
| HT-C151 | SMT ELECTRONIC TECHNOLOGY | HT-C151 Shears, Scissors, Knives |
на замовлення 26 шт: термін постачання 14-21 дні (днів) |
|
| HT-105 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools - Others
Description: Tool: for crimping
Type of tool: for crimping
Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100
Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves
Length: 0.15m
Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector
Category: Crimping Tools - Others
Description: Tool: for crimping
Type of tool: for crimping
Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100
Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves
Length: 0.15m
Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector
на замовлення 97 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 751.21 грн |
| 2+ | 526.95 грн |
| 3+ | 526.16 грн |
| 5+ | 497.46 грн |
| HT-109 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
товару немає в наявності
В кошику
од. на суму грн.
| HT-1091 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
на замовлення 103 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 264.43 грн |
| 5+ | 200.90 грн |
| 13+ | 189.74 грн |
| 30+ | 182.56 грн |
| HT-202B |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22
Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves
Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors
Length: 185mm
Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors)
Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors)
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22
Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves
Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors
Length: 185mm
Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors)
Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors)
на замовлення 104 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 546.02 грн |
| 3+ | 448.83 грн |
| 6+ | 424.91 грн |
| 48+ | 408.97 грн |
| HT-2081 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools - Others
Description: Tool: for crimping; cable ties
Type of tool: for crimping
Crimp tool application: cable ties
Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07
Crimp tool features: facilitate tie tightening and superfluous end cutting
Category: Crimping Tools - Others
Description: Tool: for crimping; cable ties
Type of tool: for crimping
Crimp tool application: cable ties
Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07
Crimp tool features: facilitate tie tightening and superfluous end cutting
на замовлення 3 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 643.90 грн |
| 3+ | 424.11 грн |
| HT-2092C |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool application: RJ50 (10p10c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock
Length: 0.2m
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool application: RJ50 (10p10c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock
Length: 0.2m
товару немає в наявності
В кошику
од. на суму грн.
| HT-225D | |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22; V35
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously
Tool material: carbon steel
Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors
Length: 210mm
Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors)
Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors)
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22; V35
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously
Tool material: carbon steel
Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors
Length: 210mm
Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors)
Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors)
на замовлення 26 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1238.00 грн |
| 3+ | 1086.59 грн |
| HT-236C |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2
Tool material: carbon steel
Crimp tool application: non-insulated terminals
Length: 0.22m
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2
Tool material: carbon steel
Crimp tool application: non-insulated terminals
Length: 0.22m
на замовлення 184 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1353.90 грн |
| 3+ | 1188.63 грн |
| HT-236U |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2
Length: 0.22m
Wire cross-section: 0.32...2mm2
Wire size: 22AWG...14AWG
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: terminals D-Sub connectors; terminals V35 connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Related items: 0969; DHPS; HDP20; HDP22; V35
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2
Length: 0.22m
Wire cross-section: 0.32...2mm2
Wire size: 22AWG...14AWG
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: terminals D-Sub connectors; terminals V35 connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Related items: 0969; DHPS; HDP20; HDP22; V35
на замовлення 60 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1180.48 грн |
| 3+ | 1036.37 грн |
| HT-268K |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Kit: for RJ plug crimping; 205mm
Type of tools set: for RJ plug crimping
Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping
Package dimensions: 305x240x60mm
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock
Crimp tool length: 205mm
Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs
Category: Crimping Tools for RJ Plugs
Description: Kit: for RJ plug crimping; 205mm
Type of tools set: for RJ plug crimping
Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping
Package dimensions: 305x240x60mm
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock
Crimp tool length: 205mm
Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs
на замовлення 10 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 2369.54 грн |
| 2+ | 2080.71 грн |
| 5+ | 2079.91 грн |
| HT-322 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59
Tool material: plastic
Kind of stripping wire: coaxial
Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59
Tool material: plastic
Kind of stripping wire: coaxial
Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis
на замовлення 31 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 690.26 грн |
| 2+ | 601.09 грн |
| 3+ | 589.14 грн |
| 5+ | 546.88 грн |
| HT-330K |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm
Type of tools set: for colaxial connector crimping
Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies
Kind of package: case
Package dimensions: 305x235x60mm
Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm
Crimp tool length: 220mm
Pliers length: 165mm
Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special
Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913
Category: Crimping Tools for Coaxial/RF Connectors
Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm
Type of tools set: for colaxial connector crimping
Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies
Kind of package: case
Package dimensions: 305x235x60mm
Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm
Crimp tool length: 220mm
Pliers length: 165mm
Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special
Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913
на замовлення 50 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 4176.75 грн |
| 8+ | 3855.29 грн |
| HT-332 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59; RG62
Tool material: plastic
Length: 99mm
Kind of stripping wire: coaxial
Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59; RG62
Tool material: plastic
Length: 99mm
Kind of stripping wire: coaxial
Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis
на замовлення 40 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 679.96 грн |
| 2+ | 577.18 грн |
| 3+ | 568.41 грн |
| 5+ | 524.56 грн |
| HT-336D2 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Length: 0.22m
Tool material: carbon steel
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Length: 0.22m
Tool material: carbon steel
на замовлення 38 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1413.14 грн |
| 2+ | 1240.45 грн |
| HT-336F2 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58
Kind of wire: B8218; RG58
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: SMA connectors; SMB connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm
Length: 0.22m
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58
Kind of wire: B8218; RG58
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: SMA connectors; SMB connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm
Length: 0.22m
на замовлення 85 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1247.44 грн |
| 3+ | 1095.36 грн |
| HT-336G |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Length: 0.22m
Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Length: 0.22m
Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
на замовлення 84 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1262.04 грн |
| 3+ | 1108.12 грн |
| HT-336J |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316
Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm
Tool material: carbon steel
Length: 0.22m
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316
Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm
Tool material: carbon steel
Length: 0.22m
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
на замовлення 14 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1312.69 грн |
| 3+ | 1152.76 грн |
| HT-504 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Length: 320mm
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Type of tool: for crimping
Tool material: steel
Crimp tool application: non-insulated terminals
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Length: 320mm
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Type of tool: for crimping
Tool material: steel
Crimp tool application: non-insulated terminals
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
на замовлення 13 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1919.67 грн |
| 2+ | 1685.29 грн |
| 10+ | 1638.26 грн |
| HT-568R |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Length: 190mm
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Length: 190mm
товару немає в наявності
В кошику
од. на суму грн.
| HT-105 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools - Others
Description: Tool: for crimping
Type of tool: for crimping
Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100
Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves
Length: 0.15m
Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector
кількість в упаковці: 1 шт
Category: Crimping Tools - Others
Description: Tool: for crimping
Type of tool: for crimping
Related items: SL-UB; SL-UG; SL-UR; SL-UY; ST-100
Crimp tool features: blackened tool; fitted with removable jaws opening spring; handles fitted with plastic sleeves
Length: 0.15m
Crimp tool application: Scotchlok connectors UR (26AWG - 19AWG); Scotchlok connector UB-2A (26AWG - 22AWG); Scotchlok connector UG (26AWG - 19AWG); Scotchlok connector UY (26AWG - 22AWG); ST-100/.. connector
кількість в упаковці: 1 шт
на замовлення 97 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 901.46 грн |
| 2+ | 656.66 грн |
| 3+ | 631.39 грн |
| 5+ | 596.95 грн |
| HT-109 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
кількість в упаковці: 1 шт
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
кількість в упаковці: 1 шт
товару немає в наявності
В кошику
од. на суму грн.
| HT-1091 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
кількість в упаковці: 1 шт
Category: Cutting Pliers
Description: Pliers; cutting; 125mm; without chamfer
Type of tool: pliers
Pliers length: 125mm
Kind of pliers: cutting
Oblique pliers/knives features: blackened tool; handles with plastic grips; insulation stripping from the round wires; narrowing jaws, bent at 45°; return spring
Kind of cut: without chamfer
кількість в упаковці: 1 шт
на замовлення 103 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 317.31 грн |
| 5+ | 250.35 грн |
| 13+ | 227.68 грн |
| 30+ | 219.07 грн |
| HT-202B |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22
Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves
Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors
Length: 185mm
Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors)
Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors)
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22
Crimp tool features: cut of wire; fitted with return spring; handles fitted with plastic sleeves
Crimp tool application: insulated terminals; non-insulated terminals; non-insulated terminals; terminals D-Sub connectors
Length: 185mm
Wire cross section: 0,5...4mm2 (non-insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,14...0,34mm2 (insulated terminals); 0,08...0,14mm2 (terminals D-Sub connectors)
Wire size: 22AWG...10AWG (non-insulated terminals); 22AWG...12AWG (non-insulated terminals); 26AWG...22AWG (insulated terminals); 28AWG...26AWG (terminals D-Sub connectors)
кількість в упаковці: 1 шт
на замовлення 104 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 655.23 грн |
| 3+ | 559.31 грн |
| 6+ | 509.89 грн |
| 48+ | 490.76 грн |
| HT-2081 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools - Others
Description: Tool: for crimping; cable ties
Type of tool: for crimping
Crimp tool application: cable ties
Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07
Crimp tool features: facilitate tie tightening and superfluous end cutting
кількість в упаковці: 1 шт
Category: Crimping Tools - Others
Description: Tool: for crimping; cable ties
Type of tool: for crimping
Crimp tool application: cable ties
Related items: CTS; CV-1; CV-2; CV-3; CV-4; CV-0; CVT-07
Crimp tool features: facilitate tie tightening and superfluous end cutting
кількість в упаковці: 1 шт
на замовлення 3 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 772.68 грн |
| 3+ | 528.51 грн |
| 7+ | 481.19 грн |
| HT-2092C |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool application: RJ50 (10p10c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock
Length: 0.2m
кількість в упаковці: 1 шт
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool application: RJ50 (10p10c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; handles fitted with plastic sleeves; jaw opening interlock
Length: 0.2m
кількість в упаковці: 1 шт
товару немає в наявності
В кошику
од. на суму грн.
| HT-225D | |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22; V35
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously
Tool material: carbon steel
Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors
Length: 210mm
Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors)
Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors)
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Related items: 0969; DHPS; HDP20; HDP22; V35
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools; the die crimps terminals on a conductor and a wire insulation simultaneously
Tool material: carbon steel
Crimp tool application: non-insulated terminals; terminals D-Sub connectors; terminals V35 connectors
Length: 210mm
Wire cross section: 0,325...0,823mm2 (non-insulated terminals); 0,325...0,823mm2 (terminals D-Sub connectors); 0,325...0,823mm2 (terminals V35 connectors); 0,05...0,205mm2 (non-insulated terminals); 0,05...0,205mm2 (terminals D-Sub connectors); 0,05...0,205mm2 (terminals V35 connectors)
Wire size: 22AWG...18AWG (non-insulated terminals); 22AWG...18AWG (terminals D-Sub connectors); 22AWG...18AWG (terminals V35 connectors); 30AWG...24AWG (non-insulated terminals); 30AWG...24AWG (terminals D-Sub connectors); 30AWG...24AWG (terminals V35 connectors)
кількість в упаковці: 1 шт
на замовлення 26 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1485.60 грн |
| 3+ | 1354.06 грн |
| HT-236C |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2
Tool material: carbon steel
Crimp tool application: non-insulated terminals
Length: 0.22m
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Type of tool: for crimping
Wire size: 12AWG...10AWG; 16AWG...14AWG; 20AWG...18AWG
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Wire cross-section: 0.5...1mm2; 1.5...2.5mm2; 4...6mm2
Tool material: carbon steel
Crimp tool application: non-insulated terminals
Length: 0.22m
кількість в упаковці: 1 шт
на замовлення 184 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1624.68 грн |
| 3+ | 1481.22 грн |
| HT-236E1 |
Виробник: SMT ELECTRONIC TECHNOLOGY
HT-336S/SZ Crimping Tools - Others
HT-336S/SZ Crimping Tools - Others
на замовлення 44 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 766.50 грн |
| 3+ | 542.42 грн |
| 6+ | 512.76 грн |
| HT-236N |
Виробник: SMT ELECTRONIC TECHNOLOGY
HT-336N Crimping Tools for Terminals
HT-336N Crimping Tools for Terminals
на замовлення 52 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1639.69 грн |
| 2+ | 1549.77 грн |
| HT-236Q1 |
Виробник: SMT ELECTRONIC TECHNOLOGY
HT-336Q Crimping Tools for RJ Plugs
HT-336Q Crimping Tools for RJ Plugs
на замовлення 28 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 2372.48 грн |
| 2+ | 2243.34 грн |
| HT-236U |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2
Length: 0.22m
Wire cross-section: 0.32...2mm2
Wire size: 22AWG...14AWG
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: terminals D-Sub connectors; terminals V35 connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Related items: 0969; DHPS; HDP20; HDP22; V35
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors; 0.32÷2mm2
Length: 0.22m
Wire cross-section: 0.32...2mm2
Wire size: 22AWG...14AWG
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: terminals D-Sub connectors; terminals V35 connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Related items: 0969; DHPS; HDP20; HDP22; V35
кількість в упаковці: 1 шт
на замовлення 60 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1416.57 грн |
| 3+ | 1291.47 грн |
| HT-268K |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Kit: for RJ plug crimping; 205mm
Type of tools set: for RJ plug crimping
Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping
Package dimensions: 305x240x60mm
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock
Crimp tool length: 205mm
Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs
кількість в упаковці: 1 шт
Category: Crimping Tools for RJ Plugs
Description: Kit: for RJ plug crimping; 205mm
Type of tools set: for RJ plug crimping
Kit contents: RJ12 (6p6c) plugs - 30 pcs; RJ45 (8p6c) plugs - 20 pcs; tool for RJ plug crimping
Package dimensions: 305x240x60mm
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p2c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock
Crimp tool length: 205mm
Standard equipment: dies for 6pin RJ plugs; dies for 8pin RJ plugs
кількість в упаковці: 1 шт
на замовлення 10 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 2843.45 грн |
| 2+ | 2592.88 грн |
| 5+ | 2495.89 грн |
| HT-322 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59
Tool material: plastic
Kind of stripping wire: coaxial
Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis
кількість в упаковці: 1 шт
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; RG58,RG59,RG6
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59
Tool material: plastic
Kind of stripping wire: coaxial
Stripping tool features: blade position adjustment by means of screwing special Allen hex screws with delivered key; fitted with three independent blades; insulation is cut after the tool rotates several times around the cable axis
кількість в упаковці: 1 шт
на замовлення 31 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 828.31 грн |
| 2+ | 749.05 грн |
| 3+ | 706.96 грн |
| 5+ | 656.26 грн |
| HT-325 |
Виробник: SMT ELECTRONIC TECHNOLOGY
HT-325 Strippers for wire & cable
HT-325 Strippers for wire & cable
на замовлення 69 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1218.77 грн |
| 2+ | 957.60 грн |
| 4+ | 905.94 грн |
| HT-330K |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm
Type of tools set: for colaxial connector crimping
Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies
Kind of package: case
Package dimensions: 305x235x60mm
Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm
Crimp tool length: 220mm
Pliers length: 165mm
Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special
Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913
кількість в упаковці: 1 шт
Category: Crimping Tools for Coaxial/RF Connectors
Description: Kit: for colaxial connector crimping; Crimp tool len: 220mm
Type of tools set: for colaxial connector crimping
Kit contents: coaxial cable stripper; crimp tool; interchangeable dies (5 pcs.); pliers for cables up to 10.5 mm diameter; screwdriver with Phillips tip for changing the dies
Kind of package: case
Package dimensions: 305x235x60mm
Crimp tool features: a special lever mechanism generates high pressure; a stripper design enables to mount the tool on the cable as a self- tightening clip; cutting of insulation layers occurs simultaneously after the tool rotates several times around the cable; handles fitted with plastic sleeves; pliers fitted with return spring, jaws opening lock and plastic sleeves on handles; pliers made of hardened carbon steel; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; two movable knives, adjustable with delivered Allen hex key, enable to set insulation cutting acc. to system: 4, 6, 8, 12mm
Crimp tool length: 220mm
Pliers length: 165mm
Stripper head marking: 6 - RG6; 8 - RG58; 9 - RG59/62; D - special
Tools features: 236A die - crimping HF connectors on RG cables: 55, 58, 59, 62, 140, 141, 142, 210, 223, 174, 303, 400, fiber-optic cables, Belden 8279; 336C die - crimping HF connectors on RG cables: 6, 59, 62, 140, 210, Belden 8279, 55, 58, 141, 142, 223, 303, 400, fiber-optic cables;; 336G die - crimping HF connectors on RG cables: 59, 62 , 8X, 140, 210, Belden 8279, 55, 58, 141, 142, 174, 223, 303, 400, fiber-optic cables;; 336J die - crimping HF connectors on RG cables: 122, 174, 179, 180, 187, 188, 195, 178, 316, Belden 8279, fiber-optic cables; 336K - crimping HF connectors on RG cables: 8, 9, 11, 87A, 149, 165, 213, 216, 225, 393, 174, 179, 187, 188, 316, Belden 9913
кількість в упаковці: 1 шт
на замовлення 50 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 5012.09 грн |
| 8+ | 4804.28 грн |
| HT-332 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59; RG62
Tool material: plastic
Length: 99mm
Kind of stripping wire: coaxial
Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis
кількість в упаковці: 1 шт
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial; 99mm; RG58,RG59,RG6,RG62
Type of tool: stripping tool
Kind of wire: RG6; RG58; RG59; RG62
Tool material: plastic
Length: 99mm
Kind of stripping wire: coaxial
Stripping tool features: 6 - RG6 mark; 8 - RG58 mark; 9 - RG59/62 mark; adjustable head with four V notches enables adjusting to a stripped cable diameter; a tool structure enables fastening it as a self-locking clip; blade position adjustment by means of screwing special Allen hex screws with delivered key; D - special mark; fitted with two movable blades; insulation is cut after the tool rotates several times around the cable axis
кількість в упаковці: 1 шт
на замовлення 40 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 815.95 грн |
| 2+ | 719.25 грн |
| 3+ | 682.09 грн |
| 5+ | 629.47 грн |
| HT-336D2 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Length: 0.22m
Tool material: carbon steel
кількість в упаковці: 1 шт
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; H1000,RG11,RG213,RG58,RG59,RG8; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: H1000; RG8; RG11; RG58; RG59; RG213
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Length: 0.22m
Tool material: carbon steel
кількість в упаковці: 1 шт
на замовлення 38 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1695.77 грн |
| 2+ | 1545.79 грн |
| HT-336F2 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58
Kind of wire: B8218; RG58
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: SMA connectors; SMB connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm
Length: 0.22m
кількість в упаковці: 1 шт
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; SMA connectors,SMB connectors; B8218,RG58
Kind of wire: B8218; RG58
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: SMA connectors; SMB connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
Die dimensions: 1.07mm; 1.73mm; 3.84mm; 4.52mm; 5.41mm
Length: 0.22m
кількість в упаковці: 1 шт
на замовлення 85 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1496.93 грн |
| 3+ | 1364.99 грн |
| HT-336G |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Length: 0.22m
Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
кількість в упаковці: 1 шт
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Length: 0.22m
Kind of wire: RG55; RG58; RG59; RG62; RG140; RG141; RG174; RG210; RG223; RG303; RG400
Type of tool: for crimping
Tool material: carbon steel
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
кількість в упаковці: 1 шт
на замовлення 84 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1514.45 грн |
| 3+ | 1380.88 грн |
| HT-336J |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316
Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm
Tool material: carbon steel
Length: 0.22m
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
кількість в упаковці: 1 шт
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; carbon steel; 220mm
Type of tool: for crimping
Crimp tool application: BNC connectors; TNC connectors; UHF (PL259) connectors
Kind of wire: B8218; RG122; RG174; RG178; RG179; RG180; RG187; RG188; RG195; RG316
Die dimensions: 1.07mm; 1.72mm; 1.98mm; 3.25mm; 3.84mm; 4.52mm
Tool material: carbon steel
Length: 0.22m
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; ergonomic pads on handles; hardened tools
кількість в упаковці: 1 шт
на замовлення 14 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1575.23 грн |
| 3+ | 1436.52 грн |
| 20+ | 1348.87 грн |
| HT-504 |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Length: 320mm
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Type of tool: for crimping
Tool material: steel
Crimp tool application: non-insulated terminals
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Length: 320mm
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Type of tool: for crimping
Tool material: steel
Crimp tool application: non-insulated terminals
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
кількість в упаковці: 1 шт
на замовлення 13 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 2303.61 грн |
| 2+ | 2100.13 грн |
| 10+ | 1965.91 грн |
| 50+ | 1944.86 грн |
| HT-568R |
Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Length: 190mm
кількість в упаковці: 1 шт
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Tool material: steel
Crimp tool features: blackened tool; cutting and stripping flat cables; ergonomic pads on handles; handles fitted with plastic sleeves; jaw opening interlock; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: RJ11 (6p2c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Length: 190mm
кількість в упаковці: 1 шт
товару немає в наявності
В кошику
од. на суму грн.
| HT-C151 |
Виробник: SMT ELECTRONIC TECHNOLOGY
HT-C151 Shears, Scissors, Knives
HT-C151 Shears, Scissors, Knives
на замовлення 26 шт:
термін постачання 14-21 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 816.98 грн |
| 2+ | 706.96 грн |
| 5+ | 668.70 грн |