| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||
|---|---|---|---|---|---|---|---|
 |
PRT-16763 | SparkFun |
 Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have |
на замовлення 1346 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-16764 | SparkFun |
Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have |
на замовлення 3388 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-16766 | SparkFun |
SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C- |
на замовлення 790 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-16782 | SparkFun |
Enclosures for Single Board Computing Flirc Raspberry Pi Zero Case |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-16792 | SparkFun |
SparkFun Accessories Fairy Lights - Addressable RGB (5m) |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-16793 | SparkFun |
Battery Chargers SkyRC IMAX B6 V2 Professional Balance Charger / Discharger |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-16835 | SparkFun |
Battery Chargers Solar Panel Charger - 10W |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-16890 | SparkFun |
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the to |
на замовлення 55 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-16891 | SparkFun |
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the unde |
на замовлення 154 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17152 | SparkFun |
SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fu |
на замовлення 176 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17157 | SparkFun | Enclosures for Single Board Computing Argon ONE Raspberry Pi 4 Case |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-17161 | SparkFun | Enclosures for Single Board Computing Argon NEO Raspberry Pi 4 Case |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-17162 | SparkFun | SparkFun Accessories Argon POLY+ Raspberry Pi 4 Case |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-17252 | SparkFun | SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out |
на замовлення 125 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17253 | SparkFun |
SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out |
на замовлення 9 шт: термін постачання 31-40 дні (днів) |
|
||
| PRT-17257 | SparkFun |
SparkFun Accessories This is a 500mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia |
на замовлення 193 шт: термін постачання 31-40 дні (днів) |
|
|||
 |
PRT-17258 | SparkFun |
SparkFun Accessories Flexible Qwiic Cable - 200mm |
на замовлення 1138 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17259 | SparkFun | SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia |
на замовлення 422 шт: термін постачання 31-40 дні (днів) |
|
||
| PRT-17260 | SparkFun |
SparkFun Accessories This is a 50mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material |
на замовлення 956 шт: термін постачання 31-40 дні (днів) |
|
|||
 |
PRT-17267 | SparkFun | Enclosures for Single Board Computing The factory is currently not accepting orders for this product. |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-17269 | SparkFun | Enclosures, Boxes & Cases Official Raspberry Pi 3A+ Case - Red/White |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-17368 | SparkFun | DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controll |
на замовлення 5 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17546 | SparkFun | Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas |
на замовлення 89 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17867 | SparkFun | Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA ba |
на замовлення 4 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-17868 | SparkFun | Enclosures for Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-18015 | SparkFun | USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looki |
на замовлення 13 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-18382 | SparkFun |
SparkFun Accessories This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-18722 | SparkFun |
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safet |
на замовлення 1 шт: термін постачання 31-40 дні (днів) |
|
||
| PRT-18738 | SparkFun | SparkFun Accessories SEE OEM 426-FIT0820 |
товару немає в наявності |
В кошику од. на суму грн. | |||
| PRT-18742 | SparkFun | SparkFun Accessories SEE OEM 658-CR-AGZC22N |
товару немає в наявності |
В кошику од. на суму грн. | |||
| PRT-18743 | SparkFun | Multilayer Ceramic Capacitors MLCC - SMD/SMT |
товару немає в наявності |
В кошику од. на суму грн. | |||
 |
PRT-18769 | SparkFun | SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" ( 150mm) cable |
товару немає в наявності |
Мінімальне замовлення: 2 шт В кошику од. на суму грн. | ||
 |
PRT-19296 | SparkFun | SparkFun Accessories MicroMod Machine Screw - M2.5x3mm, Phillips Head (5 Pack) |
товару немає в наявності |
Мінімальне замовлення: 14 шт В кошику од. на суму грн. | ||
 |
PRT-20047 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-450-24 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20050 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-450-5 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20051 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-48 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20053 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-15 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20055 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-27 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20056 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-5 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20058 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-24 |
товару немає в наявності |
В кошику од. на суму грн. | ||
|
|
PRT-20059 | SparkFun | Switching Power Supplies SEE OEM DEVICE 709-LRS-600-12 |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-21257 | SparkFun |
SparkFun Accessories This is a very handy magnetic mount for survey grade GNSS/GPS antennas. Sturdy compact and surprisingly strong this is a quick way of mounting your antenna to metal roofs parapets and other ferrous materials. The rod is threaded |
на замовлення 28 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-21570 | SparkFun | SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have he |
на замовлення 102 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-21870 | SparkFun | SparkFun Accessories USB-A Female to Type-C Male Adapter |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-22640 | SparkFun | Enclosures, Boxes & Cases This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The front and re |
на замовлення 1 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-22890 | SparkFun |
Headers & Wire Housings This is a 2x5 pin 1.27mm header. |
на замовлення 95 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-23156 | SparkFun |
Consumer Battery & Photo Battery This is your standard 1.5V AAA alkaline Energizer battery. These are roughly 1250mAh per AAA cell. You can combine four to get just about 6V peak and about 4.8V as they hit their discharge curve. Sold in single units. Not |
на замовлення 693 шт: термін постачання 31-40 дні (днів) |
В кошику од. на суму грн. | ||
| PRT-23587 | SparkFun | Raspberry Pi Accessories The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case. With improved thermal features to support the higher peak power consumption of Raspberry Pi 5 it integrates a variable-speed fan. The fan is powered and controll |
товару немає в наявності |
В кошику од. на суму грн. | |||
 |
PRT-24050 | SparkFun |
Educational Robotic Kits These basic nylon plastic casters measure 1in. in diameter and offer a simple solution for robotics mobility. These caster balls provide smooth effortless movement. Note: These are the same casters used with the XRP kits Beta & D |
товару немає в наявності |
Мінімальне замовлення: 2 шт В кошику од. на суму грн. | ||
 |
PRT-24051 | SparkFun |
Educational Robotic Kits O-Ring (2-Pack) |
товару немає в наявності |
Мінімальне замовлення: 5 шт В кошику од. на суму грн. | ||
 |
PRT-24509 | SparkFun | SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. |
на замовлення 6 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-24510 | SparkFun | SparkFun Accessories This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the mi |
на замовлення 22 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-27908 | SparkFun | Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard. |
на замовлення 90 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-28372 | SparkFun | Sockets & Adapters This adapter board is the key to creating massive professional-grade LED displays with your Teensy. It connects any Teensy from version 3.2 to 4.1 to thousands of WS2811 WS2812 or NeoPixel-compatible LEDs allowing you to drive up to |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-28381 | SparkFun | Headers & Wire Housings A single row of 14 breakaway headers with standard 0.1" (2.54mm) spacing.This 14x1 size is normally used with Teensy 3.2 or Teensy 4.0. Two of them are required one for each side of the board.These high quality header pins have 15 |
товару немає в наявності |
Мінімальне замовлення: 4 шт В кошику од. на суму грн. | ||
 |
PRT-28382 | SparkFun |
Headers & Wire Housings A single row of 24 breakaway headers with standard 0.1" (2.54mm) spacing.This 24x1 size is normally used with Teensy 3.5 or Teensy 3.6 or Teensy 4.1. Two of them are required one for each side of the board.These high quality heade |
товару немає в наявності |
Мінімальне замовлення: 3 шт В кошику од. на суму грн. | ||
 |
PRT-28387 | SparkFun | Headers & Wire Housings These pins and socket are meant to connect Teensy 4.1 ethernet to a custom circuit board. The socket is intended to solder to the bottom side of Teensy 4.1. |
на замовлення 130 шт: термін постачання 31-40 дні (днів) |
|
||
 |
PRT-28388 | SparkFun | SparkFun Accessories Ground Loop Isolator |
товару немає в наявності |
В кошику од. на суму грн. | ||
 |
PRT-28764 | SparkFun | Screws & Fasteners These are Philips-head M2.5-0.45 screws. The thread is 8.0mm long. They are steel with a zinc coating to DIN7985A. Ideal for Raspberry Pi pHAT standoffs.Sold individually. |
товару немає в наявності |
Мінімальне замовлення: 27 шт В кошику од. на суму грн. | ||
 |
PRT-29292 | SparkFun | Headers & Wire Housings This is a simple 2x3 male PTH header. Each pin has a spacing of 2mm in between each other.This is the same header that is included with the Ethernet Kit for Teensy 4.1 |
товару немає в наявності |
Мінімальне замовлення: 9 шт В кошику од. на суму грн. |
| PRT-16763 |
|
Виробник: SparkFun
Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have
Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have
на замовлення 1346 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 240.43 грн |
| PRT-16764 |
|
Виробник: SparkFun
Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have
Headers & Wire Housings This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have
на замовлення 3388 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 240.43 грн |
| PRT-16766 |
|
Виробник: SparkFun
SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-
SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-
на замовлення 790 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 6+ | 56.59 грн |
| PRT-16782 |
|
Виробник: SparkFun
Enclosures for Single Board Computing Flirc Raspberry Pi Zero Case
Enclosures for Single Board Computing Flirc Raspberry Pi Zero Case
товару немає в наявності
В кошику
од. на суму грн.
| PRT-16792 |
|
Виробник: SparkFun
SparkFun Accessories Fairy Lights - Addressable RGB (5m)
SparkFun Accessories Fairy Lights - Addressable RGB (5m)
товару немає в наявності
В кошику
од. на суму грн.
| PRT-16793 |
|
Виробник: SparkFun
Battery Chargers SkyRC IMAX B6 V2 Professional Balance Charger / Discharger
Battery Chargers SkyRC IMAX B6 V2 Professional Balance Charger / Discharger
товару немає в наявності
В кошику
од. на суму грн.
| PRT-16835 |
|
Виробник: SparkFun
Battery Chargers Solar Panel Charger - 10W
Battery Chargers Solar Panel Charger - 10W
товару немає в наявності
В кошику
од. на суму грн.
| PRT-16890 |
|
Виробник: SparkFun
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the to
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the to
на замовлення 55 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 208.66 грн |
| PRT-16891 |
|
Виробник: SparkFun
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the unde
Board to Board & Mezzanine Connectors These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the unde
на замовлення 154 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 220.68 грн |
| PRT-17152 |
|
Виробник: SparkFun
SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fu
SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fu
на замовлення 176 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 140.82 грн |
| PRT-17157 |
Виробник: SparkFun
Enclosures for Single Board Computing Argon ONE Raspberry Pi 4 Case
Enclosures for Single Board Computing Argon ONE Raspberry Pi 4 Case
товару немає в наявності
В кошику
од. на суму грн.
| PRT-17161 |
Виробник: SparkFun
Enclosures for Single Board Computing Argon NEO Raspberry Pi 4 Case
Enclosures for Single Board Computing Argon NEO Raspberry Pi 4 Case
товару немає в наявності
В кошику
од. на суму грн.
| PRT-17162 |
Виробник: SparkFun
SparkFun Accessories Argon POLY+ Raspberry Pi 4 Case
SparkFun Accessories Argon POLY+ Raspberry Pi 4 Case
товару немає в наявності
В кошику
од. на суму грн.
| PRT-17252 |
Виробник: SparkFun
SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out
SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out
на замовлення 125 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 218.10 грн |
| PRT-17253 |
|
Виробник: SparkFun
SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out
SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out
на замовлення 9 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 332.30 грн |
| PRT-17257 |
|
Виробник: SparkFun
SparkFun Accessories This is a 500mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia
SparkFun Accessories This is a 500mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia
на замовлення 193 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 203.50 грн |
| PRT-17258 |
|
Виробник: SparkFun
SparkFun Accessories Flexible Qwiic Cable - 200mm
SparkFun Accessories Flexible Qwiic Cable - 200mm
на замовлення 1138 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 144.26 грн |
| PRT-17259 |
Виробник: SparkFun
SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia
SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable materia
на замовлення 422 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 144.26 грн |
| PRT-17260 |
|
Виробник: SparkFun
SparkFun Accessories This is a 50mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material
SparkFun Accessories This is a 50mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material
на замовлення 956 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 110.77 грн |
| PRT-17267 |
Виробник: SparkFun
Enclosures for Single Board Computing The factory is currently not accepting orders for this product.
Enclosures for Single Board Computing The factory is currently not accepting orders for this product.
товару немає в наявності
В кошику
од. на суму грн.
| PRT-17269 |
Виробник: SparkFun
Enclosures, Boxes & Cases Official Raspberry Pi 3A+ Case - Red/White
Enclosures, Boxes & Cases Official Raspberry Pi 3A+ Case - Red/White
товару немає в наявності
В кошику
од. на суму грн.
| PRT-17368 |
Виробник: SparkFun
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controll
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controll
на замовлення 5 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 528.08 грн |
| PRT-17546 |
Виробник: SparkFun
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas
на замовлення 89 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 486.86 грн |
| PRT-17867 |
Виробник: SparkFun
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA ba
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA ba
на замовлення 4 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 562.43 грн |
| PRT-17868 |
Виробник: SparkFun
Enclosures for Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and
Enclosures for Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and
товару немає в наявності
В кошику
од. на суму грн.
| PRT-18015 |
Виробник: SparkFun
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looki
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looki
на замовлення 13 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 163.15 грн |
| PRT-18382 |
|
Виробник: SparkFun
SparkFun Accessories This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring
SparkFun Accessories This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring
товару немає в наявності
В кошику
од. на суму грн.
| PRT-18722 |
|
Виробник: SparkFun
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safet
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safet
на замовлення 1 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 4046.04 грн |
| PRT-18738 |
Виробник: SparkFun
SparkFun Accessories SEE OEM 426-FIT0820
SparkFun Accessories SEE OEM 426-FIT0820
товару немає в наявності
В кошику
од. на суму грн.
| PRT-18742 |
Виробник: SparkFun
SparkFun Accessories SEE OEM 658-CR-AGZC22N
SparkFun Accessories SEE OEM 658-CR-AGZC22N
товару немає в наявності
В кошику
од. на суму грн.
| PRT-18743 |
Виробник: SparkFun
Multilayer Ceramic Capacitors MLCC - SMD/SMT
Multilayer Ceramic Capacitors MLCC - SMD/SMT
товару немає в наявності
В кошику
од. на суму грн.
| PRT-18769 |
Виробник: SparkFun
SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" ( 150mm) cable
SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" ( 150mm) cable
товару немає в наявності
Мінімальне замовлення: 2 шт
В кошику
од. на суму грн.
| PRT-19296 |
Виробник: SparkFun
SparkFun Accessories MicroMod Machine Screw - M2.5x3mm, Phillips Head (5 Pack)
SparkFun Accessories MicroMod Machine Screw - M2.5x3mm, Phillips Head (5 Pack)
товару немає в наявності
Мінімальне замовлення: 14 шт
В кошику
од. на суму грн.
| PRT-20047 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-450-24
Switching Power Supplies SEE OEM DEVICE 709-LRS-450-24
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20050 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-450-5
Switching Power Supplies SEE OEM DEVICE 709-LRS-450-5
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20051 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-48
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-48
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20053 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-15
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-15
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20055 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-27
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-27
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20056 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-5
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-5
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20058 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-24
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-24
товару немає в наявності
В кошику
од. на суму грн.
| PRT-20059 |
Виробник: SparkFun
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-12
Switching Power Supplies SEE OEM DEVICE 709-LRS-600-12
товару немає в наявності
В кошику
од. на суму грн.
| PRT-21257 |
|
Виробник: SparkFun
SparkFun Accessories This is a very handy magnetic mount for survey grade GNSS/GPS antennas. Sturdy compact and surprisingly strong this is a quick way of mounting your antenna to metal roofs parapets and other ferrous materials. The rod is threaded
SparkFun Accessories This is a very handy magnetic mount for survey grade GNSS/GPS antennas. Sturdy compact and surprisingly strong this is a quick way of mounting your antenna to metal roofs parapets and other ferrous materials. The rod is threaded
на замовлення 28 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3036.25 грн |
| PRT-21570 |
Виробник: SparkFun
SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have he
SparkFun Accessories This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have he
на замовлення 102 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 184.61 грн |
| PRT-21870 |
Виробник: SparkFun
SparkFun Accessories USB-A Female to Type-C Male Adapter
SparkFun Accessories USB-A Female to Type-C Male Adapter
товару немає в наявності
В кошику
од. на суму грн.
| PRT-22640 |
Виробник: SparkFun
Enclosures, Boxes & Cases This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The front and re
Enclosures, Boxes & Cases This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The front and re
на замовлення 1 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3284.40 грн |
| PRT-22890 |
|
Виробник: SparkFun
Headers & Wire Housings This is a 2x5 pin 1.27mm header.
Headers & Wire Housings This is a 2x5 pin 1.27mm header.
на замовлення 95 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 103.90 грн |
| PRT-23156 |
|
Виробник: SparkFun
Consumer Battery & Photo Battery This is your standard 1.5V AAA alkaline Energizer battery. These are roughly 1250mAh per AAA cell. You can combine four to get just about 6V peak and about 4.8V as they hit their discharge curve. Sold in single units. Not
Consumer Battery & Photo Battery This is your standard 1.5V AAA alkaline Energizer battery. These are roughly 1250mAh per AAA cell. You can combine four to get just about 6V peak and about 4.8V as they hit their discharge curve. Sold in single units. Not
на замовлення 693 шт:
термін постачання 31-40 дні (днів)
| PRT-23587 |
Виробник: SparkFun
Raspberry Pi Accessories The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case. With improved thermal features to support the higher peak power consumption of Raspberry Pi 5 it integrates a variable-speed fan. The fan is powered and controll
Raspberry Pi Accessories The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case. With improved thermal features to support the higher peak power consumption of Raspberry Pi 5 it integrates a variable-speed fan. The fan is powered and controll
товару немає в наявності
В кошику
од. на суму грн.
| PRT-24050 |
|
Виробник: SparkFun
Educational Robotic Kits These basic nylon plastic casters measure 1in. in diameter and offer a simple solution for robotics mobility. These caster balls provide smooth effortless movement. Note: These are the same casters used with the XRP kits Beta & D
Educational Robotic Kits These basic nylon plastic casters measure 1in. in diameter and offer a simple solution for robotics mobility. These caster balls provide smooth effortless movement. Note: These are the same casters used with the XRP kits Beta & D
товару немає в наявності
Мінімальне замовлення: 2 шт
В кошику
од. на суму грн.
| PRT-24051 |
|
Виробник: SparkFun
Educational Robotic Kits O-Ring (2-Pack)
Educational Robotic Kits O-Ring (2-Pack)
товару немає в наявності
Мінімальне замовлення: 5 шт
В кошику
од. на суму грн.
| PRT-24509 |
Виробник: SparkFun
SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector.
SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector.
на замовлення 6 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 324.58 грн |
| PRT-24510 |
Виробник: SparkFun
SparkFun Accessories This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the mi
SparkFun Accessories This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the mi
на замовлення 22 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 361.50 грн |
| PRT-27908 |
Виробник: SparkFun
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
на замовлення 90 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 14+ | 23.01 грн |
| PRT-28372 |
Виробник: SparkFun
Sockets & Adapters This adapter board is the key to creating massive professional-grade LED displays with your Teensy. It connects any Teensy from version 3.2 to 4.1 to thousands of WS2811 WS2812 or NeoPixel-compatible LEDs allowing you to drive up to
Sockets & Adapters This adapter board is the key to creating massive professional-grade LED displays with your Teensy. It connects any Teensy from version 3.2 to 4.1 to thousands of WS2811 WS2812 or NeoPixel-compatible LEDs allowing you to drive up to
товару немає в наявності
В кошику
од. на суму грн.
| PRT-28381 |
Виробник: SparkFun
Headers & Wire Housings A single row of 14 breakaway headers with standard 0.1" (2.54mm) spacing.This 14x1 size is normally used with Teensy 3.2 or Teensy 4.0. Two of them are required one for each side of the board.These high quality header pins have 15
Headers & Wire Housings A single row of 14 breakaway headers with standard 0.1" (2.54mm) spacing.This 14x1 size is normally used with Teensy 3.2 or Teensy 4.0. Two of them are required one for each side of the board.These high quality header pins have 15
товару немає в наявності
Мінімальне замовлення: 4 шт
В кошику
од. на суму грн.
| PRT-28382 |
|
Виробник: SparkFun
Headers & Wire Housings A single row of 24 breakaway headers with standard 0.1" (2.54mm) spacing.This 24x1 size is normally used with Teensy 3.5 or Teensy 3.6 or Teensy 4.1. Two of them are required one for each side of the board.These high quality heade
Headers & Wire Housings A single row of 24 breakaway headers with standard 0.1" (2.54mm) spacing.This 24x1 size is normally used with Teensy 3.5 or Teensy 3.6 or Teensy 4.1. Two of them are required one for each side of the board.These high quality heade
товару немає в наявності
Мінімальне замовлення: 3 шт
В кошику
од. на суму грн.
| PRT-28387 |
Виробник: SparkFun
Headers & Wire Housings These pins and socket are meant to connect Teensy 4.1 ethernet to a custom circuit board. The socket is intended to solder to the bottom side of Teensy 4.1.
Headers & Wire Housings These pins and socket are meant to connect Teensy 4.1 ethernet to a custom circuit board. The socket is intended to solder to the bottom side of Teensy 4.1.
на замовлення 130 шт:
термін постачання 31-40 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 7+ | 44.31 грн |
| PRT-28388 |
Виробник: SparkFun
SparkFun Accessories Ground Loop Isolator
SparkFun Accessories Ground Loop Isolator
товару немає в наявності
В кошику
од. на суму грн.