Продукція > AG TERMOPASTY > Всі товари виробника AG TERMOPASTY (590) > Сторінка 2 з 10

Виробник: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; graphite; 2ml; Application: creates conducting coating
Type of chemical agent: varnish
Kind of package: tube
Agent application: electronic equipment
Application: creates conducting coating
Agent features: two-component
Grease ingredients: graphite
Signal word: Danger
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P243: Take precautionary measures against static discharge.; P271: Use only outdoors or in a well-ventilated area.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Capacity: 2ml

Виробник: AG TERMOPASTY
Category: Solders - other: lead based
Description: Solder paste; lead-based; 179°C; Sn62Pb36Ag2; 20g; syringe; 5ml
Kind of package: syringe
Signal word: Danger
Version: for soft soldering
GHS Code: GHS07; GHS08; GHS09
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects.
Kind of flux: halide-free; No Clean; REL0
Application: in the electronics industry
Kind of solder: lead-based
Flux residues: non-corrosive; transparent; yes
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P391: Collect spillage.
Appearance: paste
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Agent features: residues can be cleaned with alcohol-based agents; residues need no cleaning
Alloy composition: Sn62Pb36Ag2
Type of solder: solder paste
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Capacity: 5ml
Flux content: 15%
Binder weight: 20g
Melting point: 179°C

Виробник: AG TERMOPASTY
Category: Solders - other: lead based
Description: Solder paste; lead-based; 179°C; Sn62Pb36Ag2; 40g; syringe; 10ml
GHS Code: GHS07; GHS08; GHS09
Appearance: paste
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P391: Collect spillage.
Alloy composition: Sn62Pb36Ag2
Type of solder: solder paste
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Capacity: 10ml
Flux content: 15%
Binder weight: 40g
Melting point: 179°C
Kind of package: syringe
Version: for soft soldering
Agent features: residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of flux: halide-free; No Clean; REL0
Application: in the electronics industry
Kind of solder: lead-based
Flux residues: non-corrosive; transparent; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.

Виробник: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; can; 25÷45um; 250g; 217°C
Type of solder: solder paste
Appearance: paste
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Kind of flux: halide-free; No Clean; REL0
Version: for soft soldering
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; transparent; yes
Kind of package: can
Caution!: Store in temperature about 8 °C
Signal word: Warning
Grain size: 25...45µm
Flux content: 12%
Binder weight: 0.25kg
Melting point: 217°C
GHS Code: GHS07; GHS08
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.

Виробник: AG TERMOPASTY
Category: Solders - other: lead based
Description: Solder paste; lead-based; 179°C; Sn62Pb36Ag2; 500g; can; 25÷45um
GHS Code: GHS07; GHS08; GHS09
Appearance: paste
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P391: Collect spillage.
Alloy composition: Sn62Pb36Ag2
Type of solder: solder paste
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Flux content: 12%
Binder weight: 0.5kg
Melting point: 179°C
Kind of package: can
Version: for soft soldering
Agent features: residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of flux: halide-free; No Clean; REL0
Application: in the electronics industry
Kind of solder: lead-based
Flux residues: non-corrosive; transparent; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.

Виробник: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 6g
Appearance: paste
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07; GHS08
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Binder weight: 6g
Flux content: 12%
Melting point: 217°C
Flux residues: non-corrosive; transparent; yes
Kind of package: syringe
Version: for soft soldering
Kind of flux: halide-free; No Clean; REL0
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Type of solder: solder paste

Виробник: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 20g
Appearance: paste
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07; GHS08
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Capacity: 5ml
Binder weight: 20g
Flux content: 15%
Melting point: 217°C
Flux residues: non-corrosive; transparent; yes
Kind of package: syringe
Version: for soft soldering
Kind of flux: halide-free; No Clean; REL0
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Type of solder: solder paste

Виробник: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 40g
Appearance: paste
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07; GHS08
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Capacity: 10ml
Binder weight: 40g
Flux content: 15%
Melting point: 217°C
Flux residues: non-corrosive; transparent; yes
Kind of package: syringe
Version: for soft soldering
Kind of flux: halide-free; No Clean; REL0
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Type of solder: solder paste

Виробник: AG TERMOPASTY
Category: Solders - other: lead based
Description: Solder paste; lead-based; 179°C; Sn62Pb36Ag2; 250g; can; 25÷45um
GHS Code: GHS07; GHS08; GHS09
Appearance: paste
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P391: Collect spillage.
Alloy composition: Sn62Pb36Ag2
Type of solder: solder paste
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Flux content: 12%
Binder weight: 0.25kg
Melting point: 179°C
Kind of package: can
Version: for soft soldering
Agent features: residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of flux: halide-free; No Clean; REL0
Application: in the electronics industry
Kind of solder: lead-based
Flux residues: non-corrosive; transparent; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.

Виробник: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; can; 25÷45um; 500g; 217°C
GHS Code: GHS07; GHS08
Appearance: paste
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.
Precautionary statements: P201: Obtain special instructions before use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Alloy composition: Sn96,5Ag3Cu0,5
Type of solder: solder paste
Caution!: Store in temperature about 8 °C
Grain size: 25...45µm
Flux content: 12%
Binder weight: 0.5kg
Melting point: 217°C
Kind of package: can
Version: for soft soldering
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of flux: halide-free; No Clean; REL0
Kind of solder: lead free
Flux residues: non-corrosive; transparent; yes

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; 20ml; Signal word: Warning
Type of flux: rosin based
Appearance: resin
Capacity: 20ml
Soldering equipment features: activated with adipic acid (2,5%)
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Flux residues: amber; yes
Kind of package: can

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; Signal word: Warning; 40g
Type of flux: rosin based
Appearance: resin
Soldering equipment features: activated with adipic acid (2,5%)
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Net weight: 40g
Flux residues: amber; yes
Kind of package: can

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; 0.1l; Signal word: Warning
Type of flux: rosin based
Appearance: resin
Capacity: 0.1l
Soldering equipment features: activated with adipic acid (2,5%)
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Flux residues: amber; yes
Kind of package: can

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; paste; can; 20ml; 50÷200°C
Type of flux: rosin based
Appearance: paste
Capacity: 20ml
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Operating temperature: 50...200°C
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Kind of package: can
Kind of flux: RMA

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide,RMA; paste; can; 50÷200°C; 40g
Type of flux: rosin based
Appearance: paste
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Net weight: 40g
Operating temperature: 50...200°C
Flux residues: non-corrosive; yes
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Kind of package: can
Kind of flux: halide; RMA

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide,RMA; paste; can; 0.1l; 50÷200°C
Type of flux: rosin based
Appearance: paste
Capacity: 0.1l
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Operating temperature: 50...200°C
Flux residues: non-corrosive; yes
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Kind of package: can
Kind of flux: halide; RMA

Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 200ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.2l
Appearance: spray
Kind of package: can
Application: cleaning; dust removing; impurities removing
Agent application: LCD/TFT displays; screens
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 0.1l; 860mg/cm3@20°C; Flux: SW23
Type of flux: rosin-free
Appearance: liquid
Capacity: 0.1l
Soldering equipment features: can be washed down with alcohol based agents; can be washed down with water based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P370 + P378: In case of fire: Use ...for extinction.; P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
GHS Code: GHS02; GHS07
Flux name: SW23
Conform to the norm: PN EN 29454
Related items: ZD-171
Solids content: 4%
Density: 860mg/cm³ @ 20°C
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean; liquid; 15ml
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean
Appearance: liquid
Kind of package: bottle
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Solids content: 0...5%
Capacity: 15ml
Density: 794mg/cm³ @ 25°C
Soldering equipment features: can be washed down with alcohol based agents
Flux residues: non-corrosive

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean; liquid
Type of flux: rosin based
Appearance: liquid
Capacity: 1l
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Solids content: 0...5%
Density: 794mg/cm³ @ 25°C
Flux residues: non-corrosive
Kind of package: bottle
Kind of flux: halide-free; Lead Free; No Clean

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 50ml; 860mg/cm3@20°C
Type of flux: rosin based
Appearance: liquid
Capacity: 50ml
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Conform to the norm: PN EN 29454
Related items: ZD-171
Solids content: 24%
Density: 860mg/cm³ @ 20°C
Name: TK83
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: No Clean

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 0.1l; 860mg/cm3@20°C
Type of flux: rosin based
Appearance: liquid
Capacity: 0.1l
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Conform to the norm: PN EN 29454
Related items: ZD-171
Solids content: 24%
Density: 860mg/cm³ @ 20°C
Name: TK83
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: No Clean

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.1l; Flux: SW13
Type of flux: rosin-free
Kind of flux: Water Soluble
Appearance: liquid
Kind of package: bottle
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
GHS Code: GHS05; GHS07
Manufacturer series: TS-81
Related items: ZD-171
Solids content: 10%
Capacity: 0.1l
Density: 1.27g/cm³ @ 20°C
Soldering equipment features: corrosive
Flux residues: corrosive; yes
Conform to the norm: PN EN 29454
Flux name: SW13

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; gel; syringe; 1.4ml; SMD soldering
Type of flux: rosin based
Appearance: gel
Capacity: 1.4ml
Signal word: Danger
Hazard statements: H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P342 + P311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
GHS Code: GHS05; GHS08
Applications of soldering equipment: SMD soldering
Kind of package: syringe
Kind of flux: RMA

Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 1l; liquid; plastic container; Signal word: Danger
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Appearance: liquid
Agent features: based on alcohol
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
GHS Code: GHS02; GHS07; GHS08; GHS09
Capacity: 1l
Kind of package: plastic container
Agent application: PCBs

Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 1l; liquid; plastic container; Features: water based
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Appearance: liquid
Agent features: water based
Capacity: 1l
Kind of package: plastic container
Agent application: PCBs; SMD stencil

Виробник: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Kind of package: tube
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 3.5g
Operating temperature: -40...200°C
Name: PASTA SILIKONOWA N

Виробник: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Kind of package: plastic container
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 60g
Operating temperature: -40...200°C
Name: PASTA SILIKONOWA N

Виробник: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Kind of package: plastic container
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 1kg
Operating temperature: -40...200°C
Name: PASTA SILIKONOWA N

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 25g
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Dielectric constant: 4.7
Appearance: paste
Agent features: do not conduct; silicon based
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 25g
GHS Code: GHS09
Kind of package: syringe
Name: PASTA SILIKONOWA H
Agent application: heatsinks
Min. breakdown voltage: 30V/mm
Flash point: 350°C

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 100g
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Dielectric constant: 4.7
Appearance: paste
Agent features: do not conduct; silicon based
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.1kg
GHS Code: GHS09
Kind of package: plastic container
Name: PASTA SILIKONOWA H
Agent application: heatsinks
Min. breakdown voltage: 30V/mm
Flash point: 350°C

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 1kg
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Dielectric constant: 4.7
Appearance: paste
Agent features: do not conduct; silicon based
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 1kg
GHS Code: GHS09
Kind of package: plastic container
Name: PASTA SILIKONOWA H
Agent application: heatsinks
Min. breakdown voltage: 30V/mm
Flash point: 350°C

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of chemical agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: bucket
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 4.7
Min. breakdown voltage: 30V/mm
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 5kg
GHS Code: GHS09
Flash point: 350°C

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; red; on copper basis; copper; AG Cooper
Type of chemical agent: heat transfer paste
Colour: red
Appearance: paste
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Agent features: on copper basis
Precautionary statements: P264: Wash ...thoroughly after handling; P270: Do no eat, drink or smoke when using this product.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P337 + P313: If eye irritation persists: Get medical advice/attention
Operating temperature: -50...250°C
Thermal conductivity: 3.1W/mK
Density: 2.9g/cm³ @ 20°C
Name: AG Cooper
Grease ingredients: copper
Signal word: Warning
GHS Code: GHS07
Hazard statements: H302: Harmful if swallowed.; H319: Causes serious eye irritation; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.

Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; red; on copper basis; copper; 14ml; 3.1W/mK
Type of chemical agent: heat transfer paste
Colour: red
Appearance: paste
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Agent features: on copper basis
Precautionary statements: P264: Wash ...thoroughly after handling; P270: Do no eat, drink or smoke when using this product.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P337 + P313: If eye irritation persists: Get medical advice/attention
Operating temperature: -50...250°C
Capacity: 14ml
Thermal conductivity: 3.1W/mK
Density: 2.9g/cm³ @ 20°C
Name: AG Cooper
Grease ingredients: copper
Signal word: Warning
GHS Code: GHS07
Hazard statements: H302: Harmful if swallowed.; H319: Causes serious eye irritation; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 0.5kg

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; tube; SMAR TF; 3.5g
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: tube
Name: SMAR TF
Agent application: electronic equipment; gears; plastics
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 3.5g

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: plastic container
Name: SMAR TF
Agent application: electronic equipment; gears; plastics
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 20g

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: plastic container
Name: SMAR TF
Agent application: electronic equipment; gears; plastics
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 60g

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: plastic container
Name: SMAR TF
Agent application: electronic equipment; gears; plastics
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 1kg

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 20g

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; can; Features: acid-free; 35g
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: can
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 35g

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 900g

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 0.5l; 860mg/cm3@20°C; Flux: SW23
Type of flux: rosin-free
Appearance: liquid
Capacity: 0.5l
Soldering equipment features: can be washed down with alcohol based agents; can be washed down with water based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P370 + P378: In case of fire: Use ...for extinction.; P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
GHS Code: GHS02; GHS07
Flux name: SW23
Conform to the norm: PN EN 29454
Related items: ZD-171
Solids content: 4%
Density: 860mg/cm³ @ 20°C
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 1l; 860mg/cm3@20°C; Flux: SW23
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P370 + P378: In case of fire: Use ...for extinction.; P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
Conform to the norm: PN EN 29454
Type of flux: rosin-free
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Flux name: SW23
Related items: ZD-171
Capacity: 1l
Density: 860mg/cm³ @ 20°C
Solids content: 4%
Kind of package: bottle
Soldering equipment features: can be washed down with alcohol based agents; can be washed down with water based agents
Signal word: Danger
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 0.5l; 860mg/cm3@20°C
Type of flux: rosin based
Appearance: liquid
Capacity: 0.5l
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Conform to the norm: PN EN 29454
Solids content: 24%
Density: 860mg/cm³ @ 20°C
Name: TK83
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: No Clean

Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 1l; 860mg/cm3@20°C
Type of flux: rosin based
Appearance: liquid
Capacity: 1l
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Conform to the norm: PN EN 29454
Related items: ZD-171
Solids content: 24%
Density: 860mg/cm³ @ 20°C
Name: TK83
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: bottle
Kind of flux: No Clean

Виробник: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; sqeeze bottle with applicator; 65g
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: sqeeze bottle with applicator
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 65g