Продукція > AG TERMOPASTY > Всі товари виробника AG TERMOPASTY (589) > Сторінка 5 з 10
| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ART.AGT-254 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger Name: KONTAKT PR Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Type of agent: cleaning agent Capacity: 0.4l Kind of package: can Agent application: potentiometers Appearance: spray GHS Code: GHS02; GHS07 Application: cleaning; lubrication; regeneration Signal word: Danger |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
|||||||||
|
ART.AGT-256 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Cleaning cloth: cleaning set; SMARTGEL; 0.25l Type of cleaning cloth: cleaning set Name: SMARTGEL Capacity: 0.25l Kit contents: cleaning fluid; microfiber cloth Application: dust removing; impurities removing Agent application: computer equipment; LCD/TFT displays; office equipment |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||||
| ART.AGT-257 | AG TERMOPASTY |
Category: Wipes & cleaning clothes Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry Quantity in set/package: 5pcs. Material: microfiber Version: dry Cloth dimensions: 300x300mm Agent application: computer equipment; office equipment Type of cleaning cloth: cloth Application: cleaning |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
|||||||||
|
ART.AGT-262 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 59 Signal word: Danger Dielectric strength: 20kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: white Mix ratio: 100:10 Operating temperature: -50...200°C Surface resistance: <2410TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK Net weight: 1kg Thermal conductivity: 1.2W/mK Bonding time: 30min Appearance: encapsulating compound; paste GHS Code: GHS02; GHS07; GHS08 |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-264 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; encapsulating compound; transparent; Temp: -50÷180°C Application: sealing and encapsulation of electronic circuits Resistance to: UV rays Colour: transparent Mix ratio: 3:2 Operating temperature: -50...180°C Type of agent: silicone Agent features: additive linking; two-component Density: 980mg/cm3 @ 25°C Net weight: 1kg Bonding time: 70min Appearance: encapsulating compound |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
ART.AGT-266 | AG TERMOPASTY |
Category: Soldering Chemicals OthersDescription: Gas: butane; 200ml; can; for gas soldering iron Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: universal filling valve Capacity: 0.2l Type of gas: butane Applications of soldering equipment: for gas soldering iron |
на замовлення 191 шт: термін постачання 14-30 дні (днів) |
|
||||||||
| ART.AGT-267 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless Type of agent: isopropyl alcohol Name: KONTAKT IPA Plus Capacity: 0.25l Appearance: liquid Kind of package: bottle with atomizer Colour: colourless Density: 0.79g/cm3 @ 20°C Application: cleaning Agent application: electronic equipment; metals; optical equipment; PCBs Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. GHS Code: GHS02; GHS07 |
на замовлення 67 шт: термін постачання 14-30 дні (днів) |
|
|||||||||
| ART.AGT-270 | AG TERMOPASTY |
Category: Wipes & cleaning clothesDescription: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free Version: single sided Length: 122mm Tip material: polyurethane Agent features: does not scratch surfaces; dust free Width of cleaning swab: 15.5mm Type of cleaning cloth: cleaning sticks Handle material: polypropylene Application: keybord cleaning swabs; precise cleaning operations Length of cleaning swab: 25mm Quantity in set/package: 20pcs. |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
|||||||||
|
ART.AGT-272 | AG TERMOPASTY |
Category: Soldering Chemicals OthersDescription: Agent: soldering acid; for difficult to tin nickel surfaces Type of agent: soldering acid GHS Code: GHS05; GHS07 Application: for difficult to tin nickel surfaces Capacity: 0.5l Name: KWAS LUTOWNICZY Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-293 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-294 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
ART.AGT-296 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless Tape application: facilitates heat transfer; heatsink mounting Type of tape: heat transfer Version: glueless Length: 0.13m Thickness: 0.3mm Width: 20mm Thermal conductivity: 2.4W/mK |
на замовлення 12 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-297 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless Version: glueless Type of tape: heat transfer Length: 30mm Thickness: 0.3mm Width: 30mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
на замовлення 11 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-298 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
ART.AGT-299 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-300 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Version: glueless Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting |
на замовлення 48 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-301 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-302 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
на замовлення 21 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-303 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK Version: double-sided; glueless Type of tape: heat transfer Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
на замовлення 100 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-305 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
на замовлення 143 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-306 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Version: glueless Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting |
на замовлення 32 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-307 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
ART.AGT-308 | AG TERMOPASTY |
Category: LubricantsDescription: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml Type of agent: oil Colour: colourless Appearance: liquid Kind of package: plastic container Name: SHREDDERS OIL Capacity: 0.25l Agent application: shredders Application: lubrication; mechanical parts |
на замовлення 13 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-309 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 800g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 0.8kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-311 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 400g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H3 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 400g GHS Code: GHS09 Flash point: 350°C Density: 1.37g/cm3 @ 20°C |
на замовлення 11 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-314 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Operating temperature: -50...180°C Mix ratio: 1:1 Surface resistance: <22TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 Net weight: 1kg Thermal conductivity: 1.5W/mK Bonding time: 70min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Dielectric strength: 14.4kV/mm Colour: white |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-315 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Type of agent: silicone Appearance: encapsulating compound; liquid Colour: transparent Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Operating temperature: 50...180°C Density: 980mg/cm3 Dielectric strength: 11kV/mm Mix ratio: 3:2 Bonding time: 60min Surface resistance: <480TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
на замовлення 17 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-316 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Appearance: encapsulating compound; liquid Colour: transparent Operating temperature: 50...180°C Net weight: 1kg Surface resistance: <480TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 980mg/cm3 Bonding time: 60min Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Dielectric strength: 11kV/mm Mix ratio: 3:2 |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-317 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Type of agent: silicone Appearance: encapsulating compound; liquid Colour: white Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Operating temperature: -50...180°C Thermal conductivity: 1.5W/mK Density: 1.2g/cm3 Dielectric strength: 14.4kV/mm Mix ratio: 1:1 Bonding time: 70min Surface resistance: <22TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
на замовлення 17 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-318 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 5kg Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: bucket Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 5kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
ART.AGT-323 | AG TERMOPASTY |
Category: FluxesDescription: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13 Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel) Soldering equipment features: corrosive Kind of flux: Water Soluble Signal word: Danger Flux residues: corrosive; yes Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects. GHS Code: GHS05; GHS07 Type of flux: rosin-free Capacity: 50ml Density: 1.27g/cm3 @ 20°C Kind of package: bottle Solids content: 10% Appearance: liquid Conform to the norm: PN EN 29454 Manufacturer series: TS-81 Standard equipment: fine brush Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician. Related items: ZD-171 Flux name: SW13 |
на замовлення 1 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-324 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g Type of agent: heat transfer paste Colour: grey Appearance: paste Name: CARBON Operating temperature: -20...130°C Thermal conductivity: 15.2W/mK Kind of package: syringe Agent application: heatsinks Application: facilitates heat transfer Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 1g GHS Code: GHS09 |
на замовлення 54 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-325 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g Type of agent: heat transfer paste Colour: grey Appearance: paste Name: CARBON Operating temperature: -20...130°C Thermal conductivity: 15.2W/mK Kind of package: syringe Agent application: heatsinks Application: facilitates heat transfer Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 3g GHS Code: GHS09 |
на замовлення 34 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-326 | AG TERMOPASTY |
Category: Materials for PCB productionDescription: Agent: developer; blister,plastic container; Signal word: Danger Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ... Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation. Type of agent: developer Net weight: 110g Kind of package: blister; plastic container Agent application: for photoresists; PCBs GHS Code: GHS05; GHS07 Signal word: Danger |
на замовлення 49 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-327 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g Type of agent: heat transfer paste Agent features: silicon based Appearance: paste Name: PASTA HP Operating temperature: -50...250°C Thermal conductivity: 1.5W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 5 Signal word: Warning Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 0.5kg GHS Code: GHS09 Resistance to: temperature |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-328 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g Type of agent: heat transfer paste Agent features: silicon based Appearance: paste Name: PASTA HPX Operating temperature: -50...250°C Thermal conductivity: 2.8W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 5.1 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 0.5kg GHS Code: GHS09 Resistance to: temperature |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||||
|
ART.AGT-334 | AG TERMOPASTY |
Category: FluxesDescription: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g Type of flux: rosin based Kind of flux: halide-free; RMA; ROL0 Appearance: paste Kind of package: can Applications of soldering equipment: soldering of galvanised and nickel plated elements Soldering equipment features: can be washed down with alcohol based agents Colour: amber Operating temperature: 50...200°C Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse. GHS Code: GHS05; GHS07 Flux residues: non-corrosive; yes Net weight: 80g |
товару немає в наявності |
В кошику од. на суму грн. | ||||||||
|
|
B327-1kg ART.AGT-122 | AG TERMOPASTY |
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01 |
на замовлення 4 шт: термін постачання 31-60 дні (днів) |
|
||||||||
| B327-250g ART.AGT-090 | AG TERMOPASTY | CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250 |
на замовлення 10 шт: термін постачання 31-60 дні (днів) |
|
|||||||||
| B327-250g ART.AGT-090 | AG TERMOPASTY | CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250 |
на замовлення 60 шт: термін постачання 31-60 дні (днів) |
|
|||||||||
| B327-500g ART.AGT-091 | AG TERMOPASTY | CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500 |
на замовлення 20 шт: термін постачання 31-60 дні (днів) |
|
|||||||||
| B327-500g ART.AGT-091 | AG TERMOPASTY | CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500 |
на замовлення 2 шт: термін постачання 31-60 дні (днів) |
|
|||||||||
|
Borax (декагідрат тетраборату натрію) (agt-121) 500 г Код товару: 116167
1
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки Категорія: Флюс Опис: Флюс для пайки та зварювання латунними (мідно-цинковими) припоями. Розчиняє оксиди металів і полегшує з'єднання припою з паяним матеріалом. Бура має вигляд дрібнокристалічного порошку, що не містить фторидів. Вага/Обʼєм/К-сть: 500 г |
у наявності: 7 шт
|
|
||||||||
|
|
Butan do lutownic ART.AGT-266 | AG TERMOPASTY |
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200 |
на замовлення 6 шт: термін постачання 31-60 дні (днів) |
|
||||||||
|
Copper grease 400ml Код товару: 122872
Додати до обраних
Обраний товар
|
AG Termopasty |
Хімія > Інша хімія Опис: Мідне мастило. Багатоцільовий продукт для використання в найскладніших умовах і в широкому діапазоні температур від -40°C до 1100°C. Забезпечує відмінне змащування, захист від абразивів, корозії та високих температур. Призначення: Змащування болтів і гайок, трубних з'єднань тощо. Упаковка: 400 мл |
на замовлення: 18 шт
|
|
|||||||||
|
|
Easy Print Sn62Pb36Ag2 6g ART.AGT-023 | AG TERMOPASTY |
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag |
на замовлення 12 шт: термін постачання 31-60 дні (днів) |
|
||||||||
| Easy Print Sn96,5Ag3Cu0.5 6g ART.AGT-028 | AG TERMOPASTY | CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu |
на замовлення 13 шт: термін постачання 31-60 дні (днів) |
|
|||||||||
|
ESAC305/20 Код товару: 62034
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста Вага/Обʼєм/К-сть: 5 мл |
товару немає в наявності
|
|
||||||||
|
ESAC305/20 прострочений Код товару: 104182
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста Вага/Обʼєм/К-сть: 5 мл |
товару немає в наявності
|
|
||||||||
|
ESAC305/8 паяльна паста 217°C 96,5Sn/3Ag/0,5Cu (ART.AGT-028) Код товару: 35855
5
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Паяльна паста; Sn96,5Ag3Cu0,5; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15% Вага/Обʼєм/К-сть: 8 г Склад сплаву: Sn96,5Ag3Cu0,5 Температура плавлення: 217°С Вид припою: Безсвинцевий |
у наявності: 21 шт
очікується: 30 шт
|
|
|||||||||
|
ESAC305/8 прострочений, вийшов термін придатності Код товару: 104194
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста |
товару немає в наявності
|
|
||||||||
|
ESN62PB36AG/20 Код товару: 62035
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста Вага/Обʼєм/К-сть: 5 мл |
товару немає в наявності
|
|
||||||||
|
ESN62PB36AG/20 прострочений Код товару: 104185
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста Вага/Обʼєм/К-сть: 5 мл |
товару немає в наявності
|
|
||||||||
|
ESN62PB36AG/250 Код товару: 73002
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста |
товару немає в наявності
|
В кошику од. на суму грн. | |||||||||
|
ESN62PB36AG/40 Код товару: 73701
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста |
товару немає в наявності
|
|
||||||||
|
ESN62PB36AG/40 прострочений Код товару: 104188
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Для мʼякої пайки, паста |
товару немає в наявності
|
|
|||||||||
|
ESN62PB36AG/8 паяльна паста 179 ° C 62Sn/36Pb/2Ag (ART.AGT-023) Код товару: 35856
8
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Паяльна паста Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15% Вага/Обʼєм/К-сть: 8 г Склад сплаву: Sn62Pb36Ag2 Температура плавлення: 179°С Вид припою: Свинцевий |
у наявності: 50 шт
|
|
|||||||||
|
ESN62PB36AG/8 прострочено, вийшов термін придатності Код товару: 104195
Додати до обраних
Обраний товар
|
AG TermoPasty |
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти Категорія: Припій з додаванням срібла Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15% Вага/Обʼєм/К-сть: 8 г Склад сплаву: Sn62Pb36Ag2 Вид припою: Свинцевий |
товару немає в наявності
|
|
||||||||
|
Flux AG5 100 мл Код товару: 122881
Додати до обраних
Обраний товар
|
AG Termopasty |
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки Категорія: Флюс Опис: Високотемпературне лудіння, пайка деталей, покритих поліуретановими лаками, пайка срібних і лужених деталей Вага/Обʼєм/К-сть: 100 мл |
товару немає в наявності
|
|
||||||||
|
Флюс AG 5 Код товару: 128512
4
Додати до обраних
Обраний товар
|
AG Termopasty |
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки Категорія: Середньоактивний флюс Опис: Рідкий, безканіфольний, середньоактивний флюс типу 2.2.3 A згідно з ISO 9454-1, що є спиртовим розчином органічних сполук. Призначений для високотемпературного (300-400 °C) лудіння та паяння елементів із поліуретановими лакофарбовими покриттями і для паяння срібних та облуджених елементів. Вага/Обʼєм/К-сть: 100 мл Консистенція: Рідкий |
у наявності: 27 шт
на замовлення: 9 шт
|
|
| ART.AGT-254 |
![]() |
Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Name: KONTAKT PR
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of agent: cleaning agent
Capacity: 0.4l
Kind of package: can
Agent application: potentiometers
Appearance: spray
GHS Code: GHS02; GHS07
Application: cleaning; lubrication; regeneration
Signal word: Danger
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Name: KONTAKT PR
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of agent: cleaning agent
Capacity: 0.4l
Kind of package: can
Agent application: potentiometers
Appearance: spray
GHS Code: GHS02; GHS07
Application: cleaning; lubrication; regeneration
Signal word: Danger
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 760.28 грн |
| 2+ | 562.29 грн |
| ART.AGT-256 |
![]() |
Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Type of cleaning cloth: cleaning set
Name: SMARTGEL
Capacity: 0.25l
Kit contents: cleaning fluid; microfiber cloth
Application: dust removing; impurities removing
Agent application: computer equipment; LCD/TFT displays; office equipment
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Type of cleaning cloth: cleaning set
Name: SMARTGEL
Capacity: 0.25l
Kit contents: cleaning fluid; microfiber cloth
Application: dust removing; impurities removing
Agent application: computer equipment; LCD/TFT displays; office equipment
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 247.76 грн |
| 3+ | 221.76 грн |
| 5+ | 215.11 грн |
| ART.AGT-257 |
Виробник: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Quantity in set/package: 5pcs.
Material: microfiber
Version: dry
Cloth dimensions: 300x300mm
Agent application: computer equipment; office equipment
Type of cleaning cloth: cloth
Application: cleaning
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Quantity in set/package: 5pcs.
Material: microfiber
Version: dry
Cloth dimensions: 300x300mm
Agent application: computer equipment; office equipment
Type of cleaning cloth: cloth
Application: cleaning
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 457.06 грн |
| 3+ | 380.39 грн |
| 7+ | 359.63 грн |
| ART.AGT-262 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C
Curing method: RTV
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Signal word: Danger
Dielectric strength: 20kV/mm
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Colour: white
Mix ratio: 100:10
Operating temperature: -50...200°C
Surface resistance: <2410TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3 @ 25°C
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Net weight: 1kg
Thermal conductivity: 1.2W/mK
Bonding time: 30min
Appearance: encapsulating compound; paste
GHS Code: GHS02; GHS07; GHS08
Category: Encapsulating materials
Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C
Curing method: RTV
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Signal word: Danger
Dielectric strength: 20kV/mm
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Colour: white
Mix ratio: 100:10
Operating temperature: -50...200°C
Surface resistance: <2410TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3 @ 25°C
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Net weight: 1kg
Thermal conductivity: 1.2W/mK
Bonding time: 30min
Appearance: encapsulating compound; paste
GHS Code: GHS02; GHS07; GHS08
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3478.49 грн |
| ART.AGT-264 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; encapsulating compound; transparent; Temp: -50÷180°C
Application: sealing and encapsulation of electronic circuits
Resistance to: UV rays
Colour: transparent
Mix ratio: 3:2
Operating temperature: -50...180°C
Type of agent: silicone
Agent features: additive linking; two-component
Density: 980mg/cm3 @ 25°C
Net weight: 1kg
Bonding time: 70min
Appearance: encapsulating compound
Category: Encapsulating materials
Description: Silicone; encapsulating compound; transparent; Temp: -50÷180°C
Application: sealing and encapsulation of electronic circuits
Resistance to: UV rays
Colour: transparent
Mix ratio: 3:2
Operating temperature: -50...180°C
Type of agent: silicone
Agent features: additive linking; two-component
Density: 980mg/cm3 @ 25°C
Net weight: 1kg
Bonding time: 70min
Appearance: encapsulating compound
товару немає в наявності
В кошику
од. на суму грн.
| ART.AGT-266 |
![]() |
Виробник: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Capacity: 0.2l
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Capacity: 0.2l
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
на замовлення 191 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 360.46 грн |
| 4+ | 313.12 грн |
| 8+ | 298.17 грн |
| ART.AGT-267 |
![]() |
Виробник: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Type of agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Capacity: 0.25l
Appearance: liquid
Kind of package: bottle with atomizer
Colour: colourless
Density: 0.79g/cm3 @ 20°C
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS07
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Type of agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Capacity: 0.25l
Appearance: liquid
Kind of package: bottle with atomizer
Colour: colourless
Density: 0.79g/cm3 @ 20°C
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS07
на замовлення 67 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 478.53 грн |
| 3+ | 410.29 грн |
| 5+ | 405.31 грн |
| ART.AGT-270 |
![]() |
Виробник: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Version: single sided
Length: 122mm
Tip material: polyurethane
Agent features: does not scratch surfaces; dust free
Width of cleaning swab: 15.5mm
Type of cleaning cloth: cleaning sticks
Handle material: polypropylene
Application: keybord cleaning swabs; precise cleaning operations
Length of cleaning swab: 25mm
Quantity in set/package: 20pcs.
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Version: single sided
Length: 122mm
Tip material: polyurethane
Agent features: does not scratch surfaces; dust free
Width of cleaning swab: 15.5mm
Type of cleaning cloth: cleaning sticks
Handle material: polypropylene
Application: keybord cleaning swabs; precise cleaning operations
Length of cleaning swab: 25mm
Quantity in set/package: 20pcs.
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 548.29 грн |
| 4+ | 485.88 грн |
| ART.AGT-272 |
![]() |
Виробник: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of agent: soldering acid
GHS Code: GHS05; GHS07
Application: for difficult to tin nickel surfaces
Capacity: 0.5l
Name: KWAS LUTOWNICZY
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of agent: soldering acid
GHS Code: GHS05; GHS07
Application: for difficult to tin nickel surfaces
Capacity: 0.5l
Name: KWAS LUTOWNICZY
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 984.78 грн |
| 4+ | 831.39 грн |
| ART.AGT-293 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 153.84 грн |
| 5+ | 122.09 грн |
| ART.AGT-294 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
товару немає в наявності
В кошику
од. на суму грн.
| ART.AGT-296 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Tape application: facilitates heat transfer; heatsink mounting
Type of tape: heat transfer
Version: glueless
Length: 0.13m
Thickness: 0.3mm
Width: 20mm
Thermal conductivity: 2.4W/mK
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Tape application: facilitates heat transfer; heatsink mounting
Type of tape: heat transfer
Version: glueless
Length: 0.13m
Thickness: 0.3mm
Width: 20mm
Thermal conductivity: 2.4W/mK
на замовлення 12 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 187.83 грн |
| 4+ | 147.84 грн |
| 7+ | 145.35 грн |
| 10+ | 132.06 грн |
| ART.AGT-297 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Version: glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.3mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Version: glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.3mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
на замовлення 11 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 4+ | 125.22 грн |
| 5+ | 98.84 грн |
| 10+ | 88.04 грн |
| ART.AGT-298 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
товару немає в наявності
В кошику
од. на суму грн.
| ART.AGT-299 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 447.22 грн |
| ART.AGT-300 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
на замовлення 48 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 4+ | 118.07 грн |
| 5+ | 93.02 грн |
| 10+ | 83.06 грн |
| ART.AGT-301 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3657.38 грн |
| ART.AGT-302 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
на замовлення 21 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 212.88 грн |
| 5+ | 168.60 грн |
| 10+ | 157.81 грн |
| ART.AGT-303 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Version: double-sided; glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Version: double-sided; glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
на замовлення 100 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 4+ | 136.85 грн |
| 5+ | 107.97 грн |
| 9+ | 106.31 грн |
| 10+ | 96.34 грн |
| ART.AGT-305 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
на замовлення 143 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 399.82 грн |
| 4+ | 285.71 грн |
| 10+ | 269.93 грн |
| 20+ | 269.10 грн |
| ART.AGT-306 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
на замовлення 32 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 181.57 грн |
| 5+ | 142.86 грн |
| 7+ | 141.19 грн |
| 10+ | 127.91 грн |
| ART.AGT-307 |
Виробник: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
товару немає в наявності
В кошику
од. на суму грн.
| ART.AGT-308 |
![]() |
Виробник: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml
Type of agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Name: SHREDDERS OIL
Capacity: 0.25l
Agent application: shredders
Application: lubrication; mechanical parts
Category: Lubricants
Description: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml
Type of agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Name: SHREDDERS OIL
Capacity: 0.25l
Agent application: shredders
Application: lubrication; mechanical parts
на замовлення 13 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 339.89 грн |
| 5+ | 226.74 грн |
| 12+ | 214.28 грн |
| ART.AGT-309 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.8kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.8kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2534.86 грн |
| 5+ | 2299.81 грн |
| ART.AGT-311 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H3
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 400g
GHS Code: GHS09
Flash point: 350°C
Density: 1.37g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H3
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 400g
GHS Code: GHS09
Flash point: 350°C
Density: 1.37g/cm3 @ 20°C
на замовлення 11 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1605.53 грн |
| 2+ | 1458.46 грн |
| 6+ | 1410.28 грн |
| 10+ | 1401.98 грн |
| ART.AGT-314 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Operating temperature: -50...180°C
Mix ratio: 1:1
Surface resistance: <22TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3
Net weight: 1kg
Thermal conductivity: 1.5W/mK
Bonding time: 70min
Appearance: encapsulating compound; liquid
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Dielectric strength: 14.4kV/mm
Colour: white
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Operating temperature: -50...180°C
Mix ratio: 1:1
Surface resistance: <22TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3
Net weight: 1kg
Thermal conductivity: 1.5W/mK
Bonding time: 70min
Appearance: encapsulating compound; liquid
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Dielectric strength: 14.4kV/mm
Colour: white
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 4422.13 грн |
| ART.AGT-315 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
на замовлення 17 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1160.99 грн |
| 3+ | 1019.09 грн |
| ART.AGT-316 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Appearance: encapsulating compound; liquid
Colour: transparent
Operating temperature: 50...180°C
Net weight: 1kg
Surface resistance: <480TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 980mg/cm3
Bonding time: 60min
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Appearance: encapsulating compound; liquid
Colour: transparent
Operating temperature: 50...180°C
Net weight: 1kg
Surface resistance: <480TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 980mg/cm3
Bonding time: 60min
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Dielectric strength: 11kV/mm
Mix ratio: 3:2
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 5507.09 грн |
| ART.AGT-317 |
![]() |
Виробник: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
на замовлення 17 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1115.37 грн |
| 3+ | 979.22 грн |
| ART.AGT-318 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: bucket
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 5kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: bucket
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 5kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
товару немає в наявності
В кошику
од. на суму грн.
| ART.AGT-323 |
![]() |
Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Soldering equipment features: corrosive
Kind of flux: Water Soluble
Signal word: Danger
Flux residues: corrosive; yes
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
GHS Code: GHS05; GHS07
Type of flux: rosin-free
Capacity: 50ml
Density: 1.27g/cm3 @ 20°C
Kind of package: bottle
Solids content: 10%
Appearance: liquid
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Standard equipment: fine brush
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
Related items: ZD-171
Flux name: SW13
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Soldering equipment features: corrosive
Kind of flux: Water Soluble
Signal word: Danger
Flux residues: corrosive; yes
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
GHS Code: GHS05; GHS07
Type of flux: rosin-free
Capacity: 50ml
Density: 1.27g/cm3 @ 20°C
Kind of package: bottle
Solids content: 10%
Appearance: liquid
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Standard equipment: fine brush
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
Related items: ZD-171
Flux name: SW13
на замовлення 1 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 447.22 грн |
| ART.AGT-324 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 1g
GHS Code: GHS09
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 1g
GHS Code: GHS09
на замовлення 54 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 652.05 грн |
| 2+ | 475.91 грн |
| 6+ | 449.33 грн |
| ART.AGT-325 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 3g
GHS Code: GHS09
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 3g
GHS Code: GHS09
на замовлення 34 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1113.58 грн |
| 3+ | 978.39 грн |
| ART.AGT-326 |
![]() |
Виробник: AG TERMOPASTY
Category: Materials for PCB production
Description: Agent: developer; blister,plastic container; Signal word: Danger
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Type of agent: developer
Net weight: 110g
Kind of package: blister; plastic container
Agent application: for photoresists; PCBs
GHS Code: GHS05; GHS07
Signal word: Danger
Category: Materials for PCB production
Description: Agent: developer; blister,plastic container; Signal word: Danger
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Type of agent: developer
Net weight: 110g
Kind of package: blister; plastic container
Agent application: for photoresists; PCBs
GHS Code: GHS05; GHS07
Signal word: Danger
на замовлення 49 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 418.60 грн |
| 3+ | 322.26 грн |
| 9+ | 303.98 грн |
| ART.AGT-327 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HP
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5
Signal word: Warning
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HP
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5
Signal word: Warning
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 2056.33 грн |
| 2+ | 1805.63 грн |
| ART.AGT-328 |
![]() |
Виробник: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HPX
Operating temperature: -50...250°C
Thermal conductivity: 2.8W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5.1
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HPX
Operating temperature: -50...250°C
Thermal conductivity: 2.8W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5.1
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 3172.59 грн |
| ART.AGT-334 |
![]() |
Виробник: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g
Type of flux: rosin based
Kind of flux: halide-free; RMA; ROL0
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Soldering equipment features: can be washed down with alcohol based agents
Colour: amber
Operating temperature: 50...200°C
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Flux residues: non-corrosive; yes
Net weight: 80g
Category: Fluxes
Description: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g
Type of flux: rosin based
Kind of flux: halide-free; RMA; ROL0
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Soldering equipment features: can be washed down with alcohol based agents
Colour: amber
Operating temperature: 50...200°C
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Flux residues: non-corrosive; yes
Net weight: 80g
товару немає в наявності
В кошику
од. на суму грн.
| B327-1kg ART.AGT-122 |
![]() |
Виробник: AG TERMOPASTY
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01
на замовлення 4 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 839.85 грн |
| B327-250g ART.AGT-090 |
Виробник: AG TERMOPASTY
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
на замовлення 10 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 329.80 грн |
| B327-250g ART.AGT-090 |
Виробник: AG TERMOPASTY
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
на замовлення 60 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 329.80 грн |
| B327-500g ART.AGT-091 |
Виробник: AG TERMOPASTY
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
на замовлення 20 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 489.37 грн |
| B327-500g ART.AGT-091 |
Виробник: AG TERMOPASTY
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
на замовлення 2 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 489.37 грн |
| Borax (декагідрат тетраборату натрію) (agt-121) 500 г Код товару: 116167
1
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Флюс
Опис: Флюс для пайки та зварювання латунними (мідно-цинковими) припоями. Розчиняє оксиди металів і полегшує з'єднання припою з паяним матеріалом. Бура має вигляд дрібнокристалічного порошку, що не містить фторидів.
Вага/Обʼєм/К-сть: 500 г
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Флюс
Опис: Флюс для пайки та зварювання латунними (мідно-цинковими) припоями. Розчиняє оксиди металів і полегшує з'єднання припою з паяним матеріалом. Бура має вигляд дрібнокристалічного порошку, що не містить фторидів.
Вага/Обʼєм/К-сть: 500 г
у наявності: 7 шт
- 3 шт - склад
- 2 шт - РАДІОМАГ-Київ
- 1 шт - РАДІОМАГ-Львів
- 1 шт - РАДІОМАГ-Харків
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 145.00 грн |
| 10+ | 130.00 грн |
| Butan do lutownic ART.AGT-266 |
![]() |
Виробник: AG TERMOPASTY
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200
на замовлення 6 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 3+ | 246.42 грн |
| Copper grease 400ml Код товару: 122872
Додати до обраних
Обраний товар
|
Виробник: AG Termopasty
Хімія > Інша хімія
Опис: Мідне мастило. Багатоцільовий продукт для використання в найскладніших умовах і в широкому діапазоні температур від -40°C до 1100°C. Забезпечує відмінне змащування, захист від абразивів, корозії та високих температур.
Призначення: Змащування болтів і гайок, трубних з'єднань тощо.
Упаковка: 400 мл
Хімія > Інша хімія
Опис: Мідне мастило. Багатоцільовий продукт для використання в найскладніших умовах і в широкому діапазоні температур від -40°C до 1100°C. Забезпечує відмінне змащування, захист від абразивів, корозії та високих температур.
Призначення: Змащування болтів і гайок, трубних з'єднань тощо.
Упаковка: 400 мл
на замовлення: 18 шт
- 18 шт - термін постачання 7-21 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 162.00 грн |
| Easy Print Sn62Pb36Ag2 6g ART.AGT-023 |
![]() |
Виробник: AG TERMOPASTY
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag
на замовлення 12 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 375.95 грн |
| Easy Print Sn96,5Ag3Cu0.5 6g ART.AGT-028 |
Виробник: AG TERMOPASTY
CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu
CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu
на замовлення 13 шт:
термін постачання 31-60 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 349.39 грн |
| ESAC305/20 Код товару: 62034
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 259.00 грн |
| ESAC305/20 прострочений Код товару: 104182
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 122.00 грн |
| ESAC305/8 паяльна паста 217°C 96,5Sn/3Ag/0,5Cu (ART.AGT-028) Код товару: 35855
5
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Паяльна паста; Sn96,5Ag3Cu0,5; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn96,5Ag3Cu0,5
Температура плавлення: 217°С
Вид припою: Безсвинцевий
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Паяльна паста; Sn96,5Ag3Cu0,5; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn96,5Ag3Cu0,5
Температура плавлення: 217°С
Вид припою: Безсвинцевий
у наявності: 21 шт
- 12 шт - склад
- 3 шт - РАДІОМАГ-Київ
- 1 шт - РАДІОМАГ-Львів
- 5 шт - РАДІОМАГ-Дніпро
очікується: 30 шт
- 30 шт - очікується 28.12.2026
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 305.00 грн |
| 10+ | 289.00 грн |
| ESAC305/8 прострочений, вийшов термін придатності Код товару: 104194
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 60.50 грн |
| ESN62PB36AG/20 Код товару: 62035
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 281.00 грн |
| ESN62PB36AG/20 прострочений Код товару: 104185
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Вага/Обʼєм/К-сть: 5 мл
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 165.00 грн |
| ESN62PB36AG/250 Код товару: 73002
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
товару немає в наявності
В кошику
од. на суму грн.
| ESN62PB36AG/40 Код товару: 73701
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 375.00 грн |
| ESN62PB36AG/40 прострочений Код товару: 104188
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Для мʼякої пайки, паста
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 165.00 грн |
| ESN62PB36AG/8 паяльна паста 179 ° C 62Sn/36Pb/2Ag (ART.AGT-023) Код товару: 35856
8
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn62Pb36Ag2
Температура плавлення: 179°С
Вид припою: Свинцевий
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Паяльна паста
Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn62Pb36Ag2
Температура плавлення: 179°С
Вид припою: Свинцевий
у наявності: 50 шт
- 39 шт - склад
- 7 шт - РАДІОМАГ-Київ
- 4 шт - РАДІОМАГ-Дніпро
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 310.00 грн |
| 10+ | 285.00 грн |
| ESN62PB36AG/8 прострочено, вийшов термін придатності Код товару: 104195
Додати до обраних
Обраний товар
|
Виробник: AG TermoPasty
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Припій з додаванням срібла
Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn62Pb36Ag2
Вид припою: Свинцевий
Паяльне обладнання, витратні матеріали для пайки > Припої, паяльні пасти
Категорія: Припій з додаванням срібла
Опис: Припій; Sn62Pb36Ag2; паста; шприц; 8г; 2,5мл; флюс: No Clean; 15%
Вага/Обʼєм/К-сть: 8 г
Склад сплаву: Sn62Pb36Ag2
Вид припою: Свинцевий
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 55.50 грн |
| Flux AG5 100 мл Код товару: 122881
Додати до обраних
Обраний товар
|
Виробник: AG Termopasty
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Флюс
Опис: Високотемпературне лудіння, пайка деталей, покритих поліуретановими лаками, пайка срібних і лужених деталей
Вага/Обʼєм/К-сть: 100 мл
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Флюс
Опис: Високотемпературне лудіння, пайка деталей, покритих поліуретановими лаками, пайка срібних і лужених деталей
Вага/Обʼєм/К-сть: 100 мл
товару немає в наявності
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 141.00 грн |
| Флюс AG 5 Код товару: 128512
4
Додати до обраних
Обраний товар
|
Виробник: AG Termopasty
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Середньоактивний флюс
Опис: Рідкий, безканіфольний, середньоактивний флюс типу 2.2.3 A згідно з ISO 9454-1, що є спиртовим розчином органічних сполук. Призначений для високотемпературного (300-400 °C) лудіння та паяння елементів із поліуретановими лакофарбовими покриттями і для паяння срібних та облуджених елементів.
Вага/Обʼєм/К-сть: 100 мл
Консистенція: Рідкий
Паяльне обладнання, витратні матеріали для пайки > Флюси для пайки
Категорія: Середньоактивний флюс
Опис: Рідкий, безканіфольний, середньоактивний флюс типу 2.2.3 A згідно з ISO 9454-1, що є спиртовим розчином органічних сполук. Призначений для високотемпературного (300-400 °C) лудіння та паяння елементів із поліуретановими лакофарбовими покриттями і для паяння срібних та облуджених елементів.
Вага/Обʼєм/К-сть: 100 мл
Консистенція: Рідкий
у наявності: 27 шт
- 16 шт - склад
- 2 шт - РАДІОМАГ-Київ
- 3 шт - РАДІОМАГ-Львів
- 1 шт - РАДІОМАГ-Харків
- 5 шт - РАДІОМАГ-Дніпро
на замовлення: 9 шт
- 9 шт - термін постачання 7-21 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 215.00 грн |
| 10+ | 198.00 грн |






























































