Продукція > ELESA+GANTER > Всі товари виробника ELESA+GANTER (7212) > Сторінка 115 з 121
| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна |
||||
|---|---|---|---|---|---|---|---|---|---|
 |
GN 114.7-12-90 | ELESA+GANTER |
 Category: Locking pinsDescription: Locking pin; with locking; steel; Ø: 12mm; Working part len: 90mm Plunger diameter: 12mm Working part length: 90mm Plunger material: steel Type of protective element: locking pin Material: technopolymer PA Manufacturer series: GN 114.7 Shearing force: 61kN Version: with locking |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
GN 114.7-6-12 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 12mm Plunger diameter: 6mm Working part length: 12mm Plunger material: steel Type of protective element: locking pin Material: technopolymer PA Manufacturer series: GN 114.7 Shearing force: 14kN Version: with locking |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
DVC.3-55-44-45-M10-40 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibration damper; M10; Ø: 55mm; rubber; L: 45mm; H: 10mm; 2085N; DVC.3 Type of mounting element: vibration damper Thread: M10 Diameter: 55mm Body material: rubber Spacer length: 45mm H dimension: 10mm Shore hardness: 40±5 Static load: 2085N Stiffness: 185N/mm D1 dimension: 44mm Mechanical elements features: with internal threaded hole on both ends Manufacturer series: DVC.3 |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 927.3-44-M4-12-B | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 12mm; Lever length: 44mm Type of mounting element: lever Kind of toggle: clamping Thread length: 12mm Lever length: 44mm Handle material: stainless steel Body colour: natural External thread: M4 Version: without regulation |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 2342-NI-20-55-B-1 | ELESA+GANTER |
Category: Safety pins Description: Assembly pin; Ø: 20mm; L: 55mm; without cross hole,with washer Type of protective element: assembly pin Diameter: 20mm Length: 55mm Version: without cross hole; with washer Body material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| VTT.50-C-B-M10-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 50mm; Int.thread: M10; 15mm; H: 29mm; technopolymer PA Type of mounting element: knob Diameter: 50mm Internal thread: M10 Thread length: 15mm Height: 29mm Body material: technopolymer PA Body colour: black Cap colour: grey Boss material: brass Manufacturer series: VTT-C |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| VB.839/100 B-M14-SOFT-C2 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 100mm; Int.thread: M14; 20mm; H: 43mm; technopolymer PA Type of mounting element: knob Diameter: 100mm Internal thread: M14 Thread length: 20mm Height: 43mm Body material: technopolymer PA Body colour: black Cap colour: orange Boss material: brass |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| GN 583-M24 | ELESA+GANTER |
Category: Nuts Description: Lifting eye nut; M24; 3; steel; Plating: epoxy resin; pink Type of mounting element: lifting eye nut Thread: M24 Thread pitch: 3 Material: steel Plating material: epoxy resin Colour: pink |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 743-18-G3/4-A | ELESA+GANTER |
Category: Level Indicators Description: Level indicator; Inspect.hole dia: 18mm; G 3/4"; aluminium Type of mounting element: level indicator Inspection hole diameter: 18mm Thread: G 3/4" Version: with contrast screen Body material: aluminium Spanner size: 30mm window inspection material: glass |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
8811 | ELESA+GANTER |
Category: Knobs Description: Knob wing; Ext.thread: M10; 20mm; H: 34mm; polyamide; W: 56mm Height: 34mm Body material: polyamide Body colour: black Type of mounting element: knob wing External thread: M10 Resistance to: most of oils Plunger material: zinc plated steel Thread length: 20mm Width: 56mm |
на замовлення 9 шт: термін постачання 21-30 дні (днів) |
|
||||
 |
8572 | ELESA+GANTER |
Category: Knobs Description: Knob wing; Ext.thread: M10; 20mm; H: 21mm; polyamide; W: 56mm Height: 21mm Body material: polyamide Body colour: black Type of mounting element: knob wing External thread: M10 Resistance to: most of oils Plunger material: zinc plated steel Thread length: 20mm Width: 56mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
8813 | ELESA+GANTER |
Category: Knobs Description: Knob wing; Ext.thread: M10; 30mm; H: 34mm; polyamide; W: 56mm Height: 34mm Body material: polyamide Body colour: black Type of mounting element: knob wing External thread: M10 Resistance to: most of oils Plunger material: zinc plated steel Thread length: 30mm Width: 56mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
8801 | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M10; 13mm; H: 34mm; polyamide; W: 56mm Height: 34mm Body material: polyamide Body colour: black Type of mounting element: knob wing Internal thread: M10 Resistance to: most of oils Thread length: 13mm Width: 56mm Boss material: brass |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
GN 114.7-6-50 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 50mm Manufacturer series: GN 114.7 Type of protective element: locking pin Plunger material: steel Plunger diameter: 6mm Working part length: 50mm Shearing force: 14kN Material: technopolymer PA Version: with locking |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115.10-VDE-50-1-SW | ELESA+GANTER |
Category: Latches Description: Lock; right,with gripping tray; Clos.lever operation dp: 50mm Type of mounting element: lock Version: right; with gripping tray Closing lever operation depth: 50mm Kind of insert bolt: double-bit insert Colour: black Mounting hole diameter: 121x76mm Kit contents: key x2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 52.4-ND-13-M4-E | ELESA+GANTER |
Category: Magnets Description: Magnet: permanent; neodymium; 60N; Ø: 13mm; H: 20mm; steel Type of magnet: permanent Magnetic material: neodymium Force: 60N Diameter: 13mm Height: 20mm Enclosure material: steel Thread length: 8mm External thread: M4 |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
DIN 172-B3,9-16-A | ELESA+GANTER |
Category: Indexing plungers Description: Guide bushing; hardened steel; Øout: 7mm; Øint: 3.9mm; DIN 172 Type of mounting element: guide bushing Material: hardened steel Outside diameter: 7mm Internal diameter: 3.9mm Flange diameter: 10mm DIN standard: DIN 172 Length: 16mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 927.3-63-M5-30-B | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 30mm; Lever length: 63mm Type of mounting element: lever Kind of toggle: clamping Thread length: 30mm Lever length: 63mm Handle material: stainless steel Body colour: natural External thread: M5 Version: without regulation |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| DVA.3-50-35-M10-55 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibration damper; M10; Ø: 50mm; rubber; L: 35mm; H: 10mm; steel Type of mounting element: vibration damper Thread: M10 Diameter: 50mm Body material: rubber Spacer length: 35mm H dimension: 10mm Shore hardness: 55±5 Plunger material: steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
260262-C6 | ELESA+GANTER |
Category: Handles Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN Type of mounting element: holder Material: polypropylene Colour: black Height: 39mm Length: 144mm Cap colour: red Width: 26mm Mounting: mounting hole without thread F2 Force: 1kN F1 Force: 1kN Panel cutout diameter: 8mm Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| DIN 6336-AL-80-A | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 80mm; aluminium; without mounting hole; DIN 6336 Type of mounting element: knob Diameter: 80mm Body material: aluminium Version: without mounting hole DIN standard: DIN 6336 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| GN 55.4-SC-18-16,5-4 | ELESA+GANTER |
Category: Magnets Description: Magnet: permanent; samarium, cobalt; 50N; H: 4mm; W: 16mm; L: 18mm Type of magnet: permanent Magnetic material: samarium, cobalt Force: 50N Height: 4mm Width: 16mm Length: 18mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
MBT.40 P-M6X10-C2 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP Type of mounting element: knob Diameter: 39.5mm External thread: M6 Thread length: 10mm Height: 26.5mm Body material: technopolymer PP Plunger material: steel Body colour: black Cap colour: orange Manufacturer series: MBT-P |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 2342-NI-20-40-B-2 | ELESA+GANTER |
Category: Safety pins Description: Assembly pin; Ø: 20mm; L: 40mm; stainless steel Type of protective element: assembly pin Diameter: 20mm Length: 40mm Version: with cross hole for spring cotter pin; with washer Body material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
GN 927.3-63-M5-40-A | ELESA+GANTER |
Category: Clamping Levers Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm Type of mounting element: lever Kind of toggle: clamping Thread length: 40mm Lever length: 63mm Handle material: stainless steel Body colour: natural External thread: M5 Version: with regulation |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
ISO 7379-20-M16-30 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm Type of mounting element: shoulder screw Material: steel Thread: M16 Thread pitch: 2 Thread length: 22mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 10mm Head height: 14mm Head diameter: 30mm ISO standard: ISO 7379 Plunger length: 30mm Plunger diameter: 20mm Plating material: black finish Strength class: 12.9 |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
DVB.6-60-40-M10-12-55 | ELESA+GANTER |
Category: Feet Description: Vibroisolation foot; Ø: 60mm; Shore hardness: 55±5; 2.09kN; L: 40mm Type of mounting element: vibroisolation foot Diameter: 60mm Shore hardness: 55±5 Static load: 2.09kN Stiffness: 209N/mm Thread length: 12mm Plunger material: zinc plated steel Thread: M10 Body material: rubber Spacer length: 40mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115.10-DK-34-1-SW | ELESA+GANTER |
Category: Latches Description: Lock; right,with gripping tray; Clos.lever operation dp: 34mm Type of mounting element: lock Version: right; with gripping tray Closing lever operation depth: 34mm Key code: T7 Colour: black Mounting hole diameter: 121x76mm Kit contents: key x2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| GN 2342-NI-12-80-L-1 | ELESA+GANTER |
Category: Safety pins Description: Assembly pin; Ø: 12mm; L: 80mm; stainless steel Type of protective element: assembly pin Diameter: 12mm Length: 80mm Version: with mounting shackle; without cross hole; with washer Body material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 451421 | ELESA+GANTER |
Category: Wheels Description: Transport wheel; Ø: 100mm; W: 38mm; H: 138mm; torsional; 224kg; steel Type of mounting element: transport wheel Wheel diameter: 100mm Wheel width: 38mm Height: 138mm Version: hub with pass-through hole; torsional; with mounting plate Dynamic load: 3.5kN Rolling load: 2.2kN Force: 224kg Material: cast iron; polyurethane Body material: steel Shore hardness: 95 Manufacturer series: RE.F4-H |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 452424 | ELESA+GANTER |
Category: Wheels Description: Transport wheel; Ø: 200mm; W: 50mm; H: 250mm; torsional; 713kg; steel Type of mounting element: transport wheel Wheel diameter: 200mm Wheel width: 50mm Height: 250mm Version: hub with ball bearings; torsional; with mounting plate Dynamic load: 7kN Rolling load: 7kN Force: 713kg Material: aluminium; polyurethane Body material: steel Shore hardness: 75 Manufacturer series: RE.F2-H |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| DVA.1-80-40-SST-M14-37-55 | ELESA+GANTER |
Category: Vibration Dampers Description: Vibration damper; M14; Ø: 80mm; rubber; L: 40mm; Thread len: 37mm Type of mounting element: vibration damper Thread: M14 Diameter: 80mm Body material: rubber Spacer length: 40mm Thread length: 37mm Shore hardness: 55±5 Plunger material: stainless steel |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
CFG.40/45 SH-6 | ELESA+GANTER |
Category: Hinges Description: Hinge; Width: 79mm; technopolymer PA; black; H: 36mm; for profiles Type of mounting element: hinge Width: 79mm Material: technopolymer PA Colour: black Panel cutout diameter: 6.5mm Height: 36mm Pin material: nickel plated steel Mounting holes pitch: 47.5mm Application: for profiles |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115.10-DK-30-2-SW | ELESA+GANTER |
Category: Latches Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm Type of mounting element: lock Version: left; with gripping tray Closing lever operation depth: 30mm Key code: T7 Colour: black Mounting hole diameter: 121x76mm Kit contents: key x2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
260321-C5 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PA; black; H: 45mm; L: 178mm; W: 28mm; F2: 1.5kN Type of mounting element: holder Material: technopolymer PA Colour: black Height: 45mm Length: 178mm Cap colour: blue Width: 28mm Mounting: screwed fole F2 Force: 1.5kN F1 Force: 2.7kN Thread length: 13mm Internal thread: M8 Boss material: brass Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
222251-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Ext.thread: M10; 20mm; technopolymer PA; Cap: grey Type of mounting element: knob Diameter: 45mm External thread: M10 Thread length: 20mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: grey Mounting: screwed rod Manufacturer series: ERGOSTYLE® |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 113.9-8-20 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 8mm Working part length: 20mm Shearing force: 38kN Knob diameter: 27mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| 220416-C6 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 56mm; H: 29mm; technopolymer PA; Boss material: steel; ELK. Type of mounting element: knob Diameter: 56mm Height: 29mm Body material: technopolymer PA Body colour: red Boss material: steel Mounting: mounting hole without thread Manufacturer series: ERGOSTYLE® Trade name: ELK. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 111.2-150-30-B-SW | ELESA+GANTER |
Category: Locking pins Description: Retaining cable; with mounting tab and key ring; Plating: PVC Type of protective element: retaining cable Version: with mounting tab and key ring Plating material: PVC Material: stainless steel Length: 0.15m Body colour: black D1 dimension: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115.10-DK-26-2-SR | ELESA+GANTER |
Category: Latches Description: Lock; left,with gripping tray; Clos.lever operation dp: 26mm Type of mounting element: lock Version: left; with gripping tray Closing lever operation depth: 26mm Key code: T7 Colour: silver Mounting hole diameter: 121x76mm Kit contents: key x2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 113.3-20-90 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 20mm Working part length: 90mm Shearing force: 244kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 +1 |
GN 40-60-M12-125-A3-S | ELESA+GANTER |
Category: Feet Description: Foot; with no-slip disk,with lever; Base dia: 60mm; M12; steel Type of mounting element: foot Thread: M12 Body material: steel Version: with lever; with no-slip disk Plating material: zinc Base diameter: 60mm Plunger length: 125mm |
на замовлення 4 шт: термін постачання 21-30 дні (днів) |
|
||||
| GN 42-50-M12-125-A3-S | ELESA+GANTER |
Category: Feet Description: Foot; Base dia: 50mm; M12; steel; Plunger length: 125mm Type of mounting element: foot Thread: M12 Body material: steel Version: vulcanized; with fixing lug; with lever; with no-slip disk; without locknut; with regulation Plating material: zinc Base diameter: 50mm Plunger length: 125mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 40-50-M12-125-A3-S | ELESA+GANTER |
Category: Feet Description: Foot; with no-slip disk,with lever; Base dia: 50mm; M12; steel Type of mounting element: foot Thread: M12 Body material: steel Version: with lever; with no-slip disk Plating material: zinc Base diameter: 50mm Plunger length: 125mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 42-60-M12-125-A3-S | ELESA+GANTER |
Category: Feet Description: Foot; Base dia: 60mm; M12; steel; Plunger length: 125mm Type of mounting element: foot Thread: M12 Body material: steel Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation Plating material: zinc Base diameter: 60mm Plunger length: 125mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 113.4-10-20 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 10mm Working part length: 20mm Shearing force: 100kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115.10-DK-14-1-SW | ELESA+GANTER |
Category: Latches Description: Lock; right,with gripping tray; Clos.lever operation dp: 14mm Type of mounting element: lock Version: right; with gripping tray Closing lever operation depth: 14mm Key code: T7 Colour: black Mounting hole diameter: 121x76mm Kit contents: key x2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
GN 113.10-20-120 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 20mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 20mm Working part length: 120mm Shearing force: 403kN Knob diameter: 38mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
51958-C1 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PA; black; L: 37mm; W: 137mm; F2: 0.5kN; D: 19mm Type of mounting element: holder Material: technopolymer PA Colour: black Length: 37mm Width: 137mm F2 Force: 0.5kN F1 Force: 1.8kN Depth: 19mm |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| GN 115-SG-8 | ELESA+GANTER |
Category: Latches Description: Lock; cast zinc; 8mm; Kind of insert bolt: with thumbwheel Type of mounting element: lock Material: cast zinc Closing lever operation depth: 8mm Kind of insert bolt: with thumbwheel Body colour: chromium plated |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
260120-C3 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PA; black; H: 35mm; L: 116mm; W: 22mm; F2: 1.5kN Type of mounting element: holder Material: technopolymer PA Colour: black Height: 35mm Length: 116mm Cap colour: grey Width: 22mm Mounting: screwed fole F2 Force: 1.5kN F1 Force: 2kN Thread length: 10mm Internal thread: M5 Boss material: brass Trade name: handle |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
221226-C4 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 45mm; Int.thread: M8; 13mm; H: 26mm; technopolymer PA Type of mounting element: knob Diameter: 45mm Internal thread: M8 Thread length: 13mm Height: 26mm Body material: technopolymer PA Body colour: black Cap colour: yellow Boss material: brass Mounting: screwed fole Manufacturer series: ERGOSTYLE® |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
221641-C3 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 70mm; Int.thread: M16; 17mm; H: 35mm; technopolymer PA Type of mounting element: knob Diameter: 70mm Internal thread: M16 Thread length: 17mm Height: 35mm Body material: technopolymer PA Body colour: black Cap colour: grey Boss material: brass Mounting: screwed fole Manufacturer series: ERGOSTYLE® |
товару немає в наявності |
В кошику од. на суму грн. | ||||
| VCT.43 P-M6X25-SOFT-C2 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 43mm; Ext.thread: M6; 25mm; H: 29mm; technopolymer PP Type of mounting element: knob Diameter: 43mm External thread: M6 Thread pitch: 1 Thread length: 25mm Height: 29mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: orange Manufacturer series: VCT.SOFT |
товару немає в наявності |
В кошику од. на суму грн. | |||||
|
|
GN 113.3-6-45 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel; 21kN Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 6mm Working part length: 45mm Shearing force: 21kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
CFG.60/60 SH-6 | ELESA+GANTER |
Category: Hinges Description: Hinge; Width: 114mm; technopolymer PA; black; H: 36mm; for profiles Application: for profiles Type of mounting element: hinge Pin material: nickel plated steel Material: technopolymer PA Panel cutout diameter: 6.5mm Height: 36mm Mounting holes pitch: 65mm Width: 114mm Colour: black |
на замовлення 2 шт: термін постачання 21-30 дні (днів) |
|
||||
 |
GN 113.8-8-40 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm Type of protective element: locking pin Version: with knob; with locking Plunger material: stainless steel Plunger diameter: 8mm Working part length: 40mm Shearing force: 63kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
GN 113.3-8-10 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel; 38kN Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 8mm Working part length: 10mm Shearing force: 38kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
|
|
GN 113.3-8-100 | ELESA+GANTER |
Category: Locking pins Description: Locking pin; without handle,with locking; stainless steel; 38kN Type of protective element: locking pin Version: with locking; without handle Plunger material: stainless steel Plunger diameter: 8mm Working part length: 100mm Shearing force: 38kN |
товару немає в наявності |
В кошику од. на суму грн. | ||||
 |
GN 111.2-200-30-A-TR | ELESA+GANTER |
Category: Locking pins Description: Retaining cable; with 2 key rings; Plating: PVC; stainless steel Type of protective element: retaining cable Version: with 2 key rings Plating material: PVC Material: stainless steel Length: 0.2m Body colour: transparent D1 dimension: 30mm |
товару немає в наявності |
В кошику од. на суму грн. |
| GN 114.7-12-90 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 12mm; Working part len: 90mm
Plunger diameter: 12mm
Working part length: 90mm
Plunger material: steel
Type of protective element: locking pin
Material: technopolymer PA
Manufacturer series: GN 114.7
Shearing force: 61kN
Version: with locking
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 12mm; Working part len: 90mm
Plunger diameter: 12mm
Working part length: 90mm
Plunger material: steel
Type of protective element: locking pin
Material: technopolymer PA
Manufacturer series: GN 114.7
Shearing force: 61kN
Version: with locking
товару немає в наявності
В кошику
од. на суму грн.
| GN 114.7-6-12 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 12mm
Plunger diameter: 6mm
Working part length: 12mm
Plunger material: steel
Type of protective element: locking pin
Material: technopolymer PA
Manufacturer series: GN 114.7
Shearing force: 14kN
Version: with locking
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 12mm
Plunger diameter: 6mm
Working part length: 12mm
Plunger material: steel
Type of protective element: locking pin
Material: technopolymer PA
Manufacturer series: GN 114.7
Shearing force: 14kN
Version: with locking
товару немає в наявності
В кошику
од. на суму грн.
| DVC.3-55-44-45-M10-40 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 55mm; rubber; L: 45mm; H: 10mm; 2085N; DVC.3
Type of mounting element: vibration damper
Thread: M10
Diameter: 55mm
Body material: rubber
Spacer length: 45mm
H dimension: 10mm
Shore hardness: 40±5
Static load: 2085N
Stiffness: 185N/mm
D1 dimension: 44mm
Mechanical elements features: with internal threaded hole on both ends
Manufacturer series: DVC.3
Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 55mm; rubber; L: 45mm; H: 10mm; 2085N; DVC.3
Type of mounting element: vibration damper
Thread: M10
Diameter: 55mm
Body material: rubber
Spacer length: 45mm
H dimension: 10mm
Shore hardness: 40±5
Static load: 2085N
Stiffness: 185N/mm
D1 dimension: 44mm
Mechanical elements features: with internal threaded hole on both ends
Manufacturer series: DVC.3
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.3-44-M4-12-B |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 12mm; Lever length: 44mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 12mm
Lever length: 44mm
Handle material: stainless steel
Body colour: natural
External thread: M4
Version: without regulation
Category: Clamping Levers
Description: Lever; clamping; Thread len: 12mm; Lever length: 44mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 12mm
Lever length: 44mm
Handle material: stainless steel
Body colour: natural
External thread: M4
Version: without regulation
товару немає в наявності
В кошику
од. на суму грн.
| GN 2342-NI-20-55-B-1 |
|
Виробник: ELESA+GANTER
Category: Safety pins
Description: Assembly pin; Ø: 20mm; L: 55mm; without cross hole,with washer
Type of protective element: assembly pin
Diameter: 20mm
Length: 55mm
Version: without cross hole; with washer
Body material: stainless steel
Category: Safety pins
Description: Assembly pin; Ø: 20mm; L: 55mm; without cross hole,with washer
Type of protective element: assembly pin
Diameter: 20mm
Length: 55mm
Version: without cross hole; with washer
Body material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| VTT.50-C-B-M10-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Int.thread: M10; 15mm; H: 29mm; technopolymer PA
Type of mounting element: knob
Diameter: 50mm
Internal thread: M10
Thread length: 15mm
Height: 29mm
Body material: technopolymer PA
Body colour: black
Cap colour: grey
Boss material: brass
Manufacturer series: VTT-C
Category: Knobs
Description: Knob; Ø: 50mm; Int.thread: M10; 15mm; H: 29mm; technopolymer PA
Type of mounting element: knob
Diameter: 50mm
Internal thread: M10
Thread length: 15mm
Height: 29mm
Body material: technopolymer PA
Body colour: black
Cap colour: grey
Boss material: brass
Manufacturer series: VTT-C
товару немає в наявності
В кошику
од. на суму грн.
| VB.839/100 B-M14-SOFT-C2 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 100mm; Int.thread: M14; 20mm; H: 43mm; technopolymer PA
Type of mounting element: knob
Diameter: 100mm
Internal thread: M14
Thread length: 20mm
Height: 43mm
Body material: technopolymer PA
Body colour: black
Cap colour: orange
Boss material: brass
Category: Knobs
Description: Knob; Ø: 100mm; Int.thread: M14; 20mm; H: 43mm; technopolymer PA
Type of mounting element: knob
Diameter: 100mm
Internal thread: M14
Thread length: 20mm
Height: 43mm
Body material: technopolymer PA
Body colour: black
Cap colour: orange
Boss material: brass
товару немає в наявності
В кошику
од. на суму грн.
| GN 583-M24 |
|
Виробник: ELESA+GANTER
Category: Nuts
Description: Lifting eye nut; M24; 3; steel; Plating: epoxy resin; pink
Type of mounting element: lifting eye nut
Thread: M24
Thread pitch: 3
Material: steel
Plating material: epoxy resin
Colour: pink
Category: Nuts
Description: Lifting eye nut; M24; 3; steel; Plating: epoxy resin; pink
Type of mounting element: lifting eye nut
Thread: M24
Thread pitch: 3
Material: steel
Plating material: epoxy resin
Colour: pink
товару немає в наявності
В кошику
од. на суму грн.
| GN 743-18-G3/4-A |
|
Виробник: ELESA+GANTER
Category: Level Indicators
Description: Level indicator; Inspect.hole dia: 18mm; G 3/4"; aluminium
Type of mounting element: level indicator
Inspection hole diameter: 18mm
Thread: G 3/4"
Version: with contrast screen
Body material: aluminium
Spanner size: 30mm
window inspection material: glass
Category: Level Indicators
Description: Level indicator; Inspect.hole dia: 18mm; G 3/4"; aluminium
Type of mounting element: level indicator
Inspection hole diameter: 18mm
Thread: G 3/4"
Version: with contrast screen
Body material: aluminium
Spanner size: 30mm
window inspection material: glass
товару немає в наявності
В кошику
од. на суму грн.
| 8811 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob wing; Ext.thread: M10; 20mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 20mm
Width: 56mm
Category: Knobs
Description: Knob wing; Ext.thread: M10; 20mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 20mm
Width: 56mm
на замовлення 9 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 2+ | 341.77 грн |
| 5+ | 283.87 грн |
| 8572 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob wing; Ext.thread: M10; 20mm; H: 21mm; polyamide; W: 56mm
Height: 21mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 20mm
Width: 56mm
Category: Knobs
Description: Knob wing; Ext.thread: M10; 20mm; H: 21mm; polyamide; W: 56mm
Height: 21mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 20mm
Width: 56mm
товару немає в наявності
В кошику
од. на суму грн.
| 8813 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob wing; Ext.thread: M10; 30mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 30mm
Width: 56mm
Category: Knobs
Description: Knob wing; Ext.thread: M10; 30mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
External thread: M10
Resistance to: most of oils
Plunger material: zinc plated steel
Thread length: 30mm
Width: 56mm
товару немає в наявності
В кошику
од. на суму грн.
| 8801 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M10; 13mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
Internal thread: M10
Resistance to: most of oils
Thread length: 13mm
Width: 56mm
Boss material: brass
Category: Knobs
Description: Knob wing; Int.thread: M10; 13mm; H: 34mm; polyamide; W: 56mm
Height: 34mm
Body material: polyamide
Body colour: black
Type of mounting element: knob wing
Internal thread: M10
Resistance to: most of oils
Thread length: 13mm
Width: 56mm
Boss material: brass
товару немає в наявності
В кошику
од. на суму грн.
| GN 114.7-6-50 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 50mm
Manufacturer series: GN 114.7
Type of protective element: locking pin
Plunger material: steel
Plunger diameter: 6mm
Working part length: 50mm
Shearing force: 14kN
Material: technopolymer PA
Version: with locking
Category: Locking pins
Description: Locking pin; with locking; steel; Ø: 6mm; Working part len: 50mm
Manufacturer series: GN 114.7
Type of protective element: locking pin
Plunger material: steel
Plunger diameter: 6mm
Working part length: 50mm
Shearing force: 14kN
Material: technopolymer PA
Version: with locking
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-VDE-50-1-SW |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 50mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 50mm
Kind of insert bolt: double-bit insert
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 50mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 50mm
Kind of insert bolt: double-bit insert
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
товару немає в наявності
В кошику
од. на суму грн.
| GN 52.4-ND-13-M4-E |
|
Виробник: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 60N; Ø: 13mm; H: 20mm; steel
Type of magnet: permanent
Magnetic material: neodymium
Force: 60N
Diameter: 13mm
Height: 20mm
Enclosure material: steel
Thread length: 8mm
External thread: M4
Category: Magnets
Description: Magnet: permanent; neodymium; 60N; Ø: 13mm; H: 20mm; steel
Type of magnet: permanent
Magnetic material: neodymium
Force: 60N
Diameter: 13mm
Height: 20mm
Enclosure material: steel
Thread length: 8mm
External thread: M4
товару немає в наявності
В кошику
од. на суму грн.
| DIN 172-B3,9-16-A |
|
Виробник: ELESA+GANTER
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 7mm; Øint: 3.9mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 7mm
Internal diameter: 3.9mm
Flange diameter: 10mm
DIN standard: DIN 172
Length: 16mm
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 7mm; Øint: 3.9mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 7mm
Internal diameter: 3.9mm
Flange diameter: 10mm
DIN standard: DIN 172
Length: 16mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.3-63-M5-30-B |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 30mm; Lever length: 63mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 30mm
Lever length: 63mm
Handle material: stainless steel
Body colour: natural
External thread: M5
Version: without regulation
Category: Clamping Levers
Description: Lever; clamping; Thread len: 30mm; Lever length: 63mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 30mm
Lever length: 63mm
Handle material: stainless steel
Body colour: natural
External thread: M5
Version: without regulation
товару немає в наявності
В кошику
од. на суму грн.
| DVA.3-50-35-M10-55 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 50mm; rubber; L: 35mm; H: 10mm; steel
Type of mounting element: vibration damper
Thread: M10
Diameter: 50mm
Body material: rubber
Spacer length: 35mm
H dimension: 10mm
Shore hardness: 55±5
Plunger material: steel
Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 50mm; rubber; L: 35mm; H: 10mm; steel
Type of mounting element: vibration damper
Thread: M10
Diameter: 50mm
Body material: rubber
Spacer length: 35mm
H dimension: 10mm
Shore hardness: 55±5
Plunger material: steel
товару немає в наявності
В кошику
од. на суму грн.
| 260262-C6 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: red
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: red
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| DIN 6336-AL-80-A |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 80mm; aluminium; without mounting hole; DIN 6336
Type of mounting element: knob
Diameter: 80mm
Body material: aluminium
Version: without mounting hole
DIN standard: DIN 6336
Category: Knobs
Description: Knob; Ø: 80mm; aluminium; without mounting hole; DIN 6336
Type of mounting element: knob
Diameter: 80mm
Body material: aluminium
Version: without mounting hole
DIN standard: DIN 6336
товару немає в наявності
В кошику
од. на суму грн.
| GN 55.4-SC-18-16,5-4 |
|
Виробник: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; samarium, cobalt; 50N; H: 4mm; W: 16mm; L: 18mm
Type of magnet: permanent
Magnetic material: samarium, cobalt
Force: 50N
Height: 4mm
Width: 16mm
Length: 18mm
Category: Magnets
Description: Magnet: permanent; samarium, cobalt; 50N; H: 4mm; W: 16mm; L: 18mm
Type of magnet: permanent
Magnetic material: samarium, cobalt
Force: 50N
Height: 4mm
Width: 16mm
Length: 18mm
товару немає в наявності
В кошику
од. на суму грн.
| MBT.40 P-M6X10-C2 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP
Type of mounting element: knob
Diameter: 39.5mm
External thread: M6
Thread length: 10mm
Height: 26.5mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: orange
Manufacturer series: MBT-P
Category: Knobs
Description: Knob; Ø: 39.5mm; Ext.thread: M6; 10mm; H: 26.5mm; technopolymer PP
Type of mounting element: knob
Diameter: 39.5mm
External thread: M6
Thread length: 10mm
Height: 26.5mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: orange
Manufacturer series: MBT-P
товару немає в наявності
В кошику
од. на суму грн.
| GN 2342-NI-20-40-B-2 |
|
Виробник: ELESA+GANTER
Category: Safety pins
Description: Assembly pin; Ø: 20mm; L: 40mm; stainless steel
Type of protective element: assembly pin
Diameter: 20mm
Length: 40mm
Version: with cross hole for spring cotter pin; with washer
Body material: stainless steel
Category: Safety pins
Description: Assembly pin; Ø: 20mm; L: 40mm; stainless steel
Type of protective element: assembly pin
Diameter: 20mm
Length: 40mm
Version: with cross hole for spring cotter pin; with washer
Body material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| GN 927.3-63-M5-40-A |
|
Виробник: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 40mm
Lever length: 63mm
Handle material: stainless steel
Body colour: natural
External thread: M5
Version: with regulation
Category: Clamping Levers
Description: Lever; clamping; Thread len: 40mm; Lever length: 63mm
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 40mm
Lever length: 63mm
Handle material: stainless steel
Body colour: natural
External thread: M5
Version: with regulation
товару немає в наявності
В кошику
од. на суму грн.
| ISO 7379-20-M16-30 |
|
Виробник: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm
Type of mounting element: shoulder screw
Material: steel
Thread: M16
Thread pitch: 2
Thread length: 22mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 10mm
Head height: 14mm
Head diameter: 30mm
ISO standard: ISO 7379
Plunger length: 30mm
Plunger diameter: 20mm
Plating material: black finish
Strength class: 12.9
Category: Shoulder Screws
Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm
Type of mounting element: shoulder screw
Material: steel
Thread: M16
Thread pitch: 2
Thread length: 22mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 10mm
Head height: 14mm
Head diameter: 30mm
ISO standard: ISO 7379
Plunger length: 30mm
Plunger diameter: 20mm
Plating material: black finish
Strength class: 12.9
товару немає в наявності
В кошику
од. на суму грн.
| DVB.6-60-40-M10-12-55 |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Vibroisolation foot; Ø: 60mm; Shore hardness: 55±5; 2.09kN; L: 40mm
Type of mounting element: vibroisolation foot
Diameter: 60mm
Shore hardness: 55±5
Static load: 2.09kN
Stiffness: 209N/mm
Thread length: 12mm
Plunger material: zinc plated steel
Thread: M10
Body material: rubber
Spacer length: 40mm
Category: Feet
Description: Vibroisolation foot; Ø: 60mm; Shore hardness: 55±5; 2.09kN; L: 40mm
Type of mounting element: vibroisolation foot
Diameter: 60mm
Shore hardness: 55±5
Static load: 2.09kN
Stiffness: 209N/mm
Thread length: 12mm
Plunger material: zinc plated steel
Thread: M10
Body material: rubber
Spacer length: 40mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-DK-34-1-SW |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 34mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 34mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 34mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 34mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
товару немає в наявності
В кошику
од. на суму грн.
| GN 2342-NI-12-80-L-1 |
|
Виробник: ELESA+GANTER
Category: Safety pins
Description: Assembly pin; Ø: 12mm; L: 80mm; stainless steel
Type of protective element: assembly pin
Diameter: 12mm
Length: 80mm
Version: with mounting shackle; without cross hole; with washer
Body material: stainless steel
Category: Safety pins
Description: Assembly pin; Ø: 12mm; L: 80mm; stainless steel
Type of protective element: assembly pin
Diameter: 12mm
Length: 80mm
Version: with mounting shackle; without cross hole; with washer
Body material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| 451421 |
|
Виробник: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 100mm; W: 38mm; H: 138mm; torsional; 224kg; steel
Type of mounting element: transport wheel
Wheel diameter: 100mm
Wheel width: 38mm
Height: 138mm
Version: hub with pass-through hole; torsional; with mounting plate
Dynamic load: 3.5kN
Rolling load: 2.2kN
Force: 224kg
Material: cast iron; polyurethane
Body material: steel
Shore hardness: 95
Manufacturer series: RE.F4-H
Category: Wheels
Description: Transport wheel; Ø: 100mm; W: 38mm; H: 138mm; torsional; 224kg; steel
Type of mounting element: transport wheel
Wheel diameter: 100mm
Wheel width: 38mm
Height: 138mm
Version: hub with pass-through hole; torsional; with mounting plate
Dynamic load: 3.5kN
Rolling load: 2.2kN
Force: 224kg
Material: cast iron; polyurethane
Body material: steel
Shore hardness: 95
Manufacturer series: RE.F4-H
товару немає в наявності
В кошику
од. на суму грн.
| 452424 |
|
Виробник: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 200mm; W: 50mm; H: 250mm; torsional; 713kg; steel
Type of mounting element: transport wheel
Wheel diameter: 200mm
Wheel width: 50mm
Height: 250mm
Version: hub with ball bearings; torsional; with mounting plate
Dynamic load: 7kN
Rolling load: 7kN
Force: 713kg
Material: aluminium; polyurethane
Body material: steel
Shore hardness: 75
Manufacturer series: RE.F2-H
Category: Wheels
Description: Transport wheel; Ø: 200mm; W: 50mm; H: 250mm; torsional; 713kg; steel
Type of mounting element: transport wheel
Wheel diameter: 200mm
Wheel width: 50mm
Height: 250mm
Version: hub with ball bearings; torsional; with mounting plate
Dynamic load: 7kN
Rolling load: 7kN
Force: 713kg
Material: aluminium; polyurethane
Body material: steel
Shore hardness: 75
Manufacturer series: RE.F2-H
товару немає в наявності
В кошику
од. на суму грн.
| DVA.1-80-40-SST-M14-37-55 |
|
Виробник: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M14; Ø: 80mm; rubber; L: 40mm; Thread len: 37mm
Type of mounting element: vibration damper
Thread: M14
Diameter: 80mm
Body material: rubber
Spacer length: 40mm
Thread length: 37mm
Shore hardness: 55±5
Plunger material: stainless steel
Category: Vibration Dampers
Description: Vibration damper; M14; Ø: 80mm; rubber; L: 40mm; Thread len: 37mm
Type of mounting element: vibration damper
Thread: M14
Diameter: 80mm
Body material: rubber
Spacer length: 40mm
Thread length: 37mm
Shore hardness: 55±5
Plunger material: stainless steel
товару немає в наявності
В кошику
од. на суму грн.
| CFG.40/45 SH-6 |
|
Виробник: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 79mm; technopolymer PA; black; H: 36mm; for profiles
Type of mounting element: hinge
Width: 79mm
Material: technopolymer PA
Colour: black
Panel cutout diameter: 6.5mm
Height: 36mm
Pin material: nickel plated steel
Mounting holes pitch: 47.5mm
Application: for profiles
Category: Hinges
Description: Hinge; Width: 79mm; technopolymer PA; black; H: 36mm; for profiles
Type of mounting element: hinge
Width: 79mm
Material: technopolymer PA
Colour: black
Panel cutout diameter: 6.5mm
Height: 36mm
Pin material: nickel plated steel
Mounting holes pitch: 47.5mm
Application: for profiles
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-DK-30-2-SW |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 30mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 30mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 30mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
товару немає в наявності
В кошику
од. на суму грн.
| 260321-C5 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; black; H: 45mm; L: 178mm; W: 28mm; F2: 1.5kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 45mm
Length: 178mm
Cap colour: blue
Width: 28mm
Mounting: screwed fole
F2 Force: 1.5kN
F1 Force: 2.7kN
Thread length: 13mm
Internal thread: M8
Boss material: brass
Trade name: handle
Category: Handles
Description: Holder; technopolymer PA; black; H: 45mm; L: 178mm; W: 28mm; F2: 1.5kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 45mm
Length: 178mm
Cap colour: blue
Width: 28mm
Mounting: screwed fole
F2 Force: 1.5kN
F1 Force: 2.7kN
Thread length: 13mm
Internal thread: M8
Boss material: brass
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| 222251-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M10; 20mm; technopolymer PA; Cap: grey
Type of mounting element: knob
Diameter: 45mm
External thread: M10
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Ext.thread: M10; 20mm; technopolymer PA; Cap: grey
Type of mounting element: knob
Diameter: 45mm
External thread: M10
Thread length: 20mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: ERGOSTYLE®
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.9-8-20 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 20mm
Shearing force: 38kN
Knob diameter: 27mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 20mm
Shearing force: 38kN
Knob diameter: 27mm
товару немає в наявності
В кошику
од. на суму грн.
| 220416-C6 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 56mm; H: 29mm; technopolymer PA; Boss material: steel; ELK.
Type of mounting element: knob
Diameter: 56mm
Height: 29mm
Body material: technopolymer PA
Body colour: red
Boss material: steel
Mounting: mounting hole without thread
Manufacturer series: ERGOSTYLE®
Trade name: ELK.
Category: Knobs
Description: Knob; Ø: 56mm; H: 29mm; technopolymer PA; Boss material: steel; ELK.
Type of mounting element: knob
Diameter: 56mm
Height: 29mm
Body material: technopolymer PA
Body colour: red
Boss material: steel
Mounting: mounting hole without thread
Manufacturer series: ERGOSTYLE®
Trade name: ELK.
товару немає в наявності
В кошику
од. на суму грн.
| GN 111.2-150-30-B-SW |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Retaining cable; with mounting tab and key ring; Plating: PVC
Type of protective element: retaining cable
Version: with mounting tab and key ring
Plating material: PVC
Material: stainless steel
Length: 0.15m
Body colour: black
D1 dimension: 30mm
Category: Locking pins
Description: Retaining cable; with mounting tab and key ring; Plating: PVC
Type of protective element: retaining cable
Version: with mounting tab and key ring
Plating material: PVC
Material: stainless steel
Length: 0.15m
Body colour: black
D1 dimension: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-DK-26-2-SR |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 26mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 26mm
Key code: T7
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
Category: Latches
Description: Lock; left,with gripping tray; Clos.lever operation dp: 26mm
Type of mounting element: lock
Version: left; with gripping tray
Closing lever operation depth: 26mm
Key code: T7
Colour: silver
Mounting hole diameter: 121x76mm
Kit contents: key x2
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.3-20-90 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 20mm
Working part length: 90mm
Shearing force: 244kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 20mm
Working part length: 90mm
Shearing force: 244kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 40-60-M12-125-A3-S |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; with no-slip disk,with lever; Base dia: 60mm; M12; steel
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with lever; with no-slip disk
Plating material: zinc
Base diameter: 60mm
Plunger length: 125mm
Category: Feet
Description: Foot; with no-slip disk,with lever; Base dia: 60mm; M12; steel
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with lever; with no-slip disk
Plating material: zinc
Base diameter: 60mm
Plunger length: 125mm
на замовлення 4 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 1130.08 грн |
| GN 42-50-M12-125-A3-S |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; Base dia: 50mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: vulcanized; with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 50mm
Plunger length: 125mm
Category: Feet
Description: Foot; Base dia: 50mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: vulcanized; with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 50mm
Plunger length: 125mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 40-50-M12-125-A3-S |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; with no-slip disk,with lever; Base dia: 50mm; M12; steel
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with lever; with no-slip disk
Plating material: zinc
Base diameter: 50mm
Plunger length: 125mm
Category: Feet
Description: Foot; with no-slip disk,with lever; Base dia: 50mm; M12; steel
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with lever; with no-slip disk
Plating material: zinc
Base diameter: 50mm
Plunger length: 125mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 42-60-M12-125-A3-S |
|
Виробник: ELESA+GANTER
Category: Feet
Description: Foot; Base dia: 60mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 60mm
Plunger length: 125mm
Category: Feet
Description: Foot; Base dia: 60mm; M12; steel; Plunger length: 125mm
Type of mounting element: foot
Thread: M12
Body material: steel
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Plating material: zinc
Base diameter: 60mm
Plunger length: 125mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.4-10-20 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 20mm
Shearing force: 100kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 10mm
Working part length: 20mm
Shearing force: 100kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 115.10-DK-14-1-SW |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 14mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 14mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
Category: Latches
Description: Lock; right,with gripping tray; Clos.lever operation dp: 14mm
Type of mounting element: lock
Version: right; with gripping tray
Closing lever operation depth: 14mm
Key code: T7
Colour: black
Mounting hole diameter: 121x76mm
Kit contents: key x2
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.10-20-120 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 20mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 20mm
Working part length: 120mm
Shearing force: 403kN
Knob diameter: 38mm
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 20mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 20mm
Working part length: 120mm
Shearing force: 403kN
Knob diameter: 38mm
товару немає в наявності
В кошику
од. на суму грн.
| 51958-C1 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; black; L: 37mm; W: 137mm; F2: 0.5kN; D: 19mm
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Length: 37mm
Width: 137mm
F2 Force: 0.5kN
F1 Force: 1.8kN
Depth: 19mm
Category: Handles
Description: Holder; technopolymer PA; black; L: 37mm; W: 137mm; F2: 0.5kN; D: 19mm
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Length: 37mm
Width: 137mm
F2 Force: 0.5kN
F1 Force: 1.8kN
Depth: 19mm
товару немає в наявності
В кошику
од. на суму грн.
| GN 115-SG-8 |
|
Виробник: ELESA+GANTER
Category: Latches
Description: Lock; cast zinc; 8mm; Kind of insert bolt: with thumbwheel
Type of mounting element: lock
Material: cast zinc
Closing lever operation depth: 8mm
Kind of insert bolt: with thumbwheel
Body colour: chromium plated
Category: Latches
Description: Lock; cast zinc; 8mm; Kind of insert bolt: with thumbwheel
Type of mounting element: lock
Material: cast zinc
Closing lever operation depth: 8mm
Kind of insert bolt: with thumbwheel
Body colour: chromium plated
товару немає в наявності
В кошику
од. на суму грн.
| 260120-C3 |
|
Виробник: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; black; H: 35mm; L: 116mm; W: 22mm; F2: 1.5kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 35mm
Length: 116mm
Cap colour: grey
Width: 22mm
Mounting: screwed fole
F2 Force: 1.5kN
F1 Force: 2kN
Thread length: 10mm
Internal thread: M5
Boss material: brass
Trade name: handle
Category: Handles
Description: Holder; technopolymer PA; black; H: 35mm; L: 116mm; W: 22mm; F2: 1.5kN
Type of mounting element: holder
Material: technopolymer PA
Colour: black
Height: 35mm
Length: 116mm
Cap colour: grey
Width: 22mm
Mounting: screwed fole
F2 Force: 1.5kN
F1 Force: 2kN
Thread length: 10mm
Internal thread: M5
Boss material: brass
Trade name: handle
товару немає в наявності
В кошику
од. на суму грн.
| 221226-C4 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 45mm; Int.thread: M8; 13mm; H: 26mm; technopolymer PA
Type of mounting element: knob
Diameter: 45mm
Internal thread: M8
Thread length: 13mm
Height: 26mm
Body material: technopolymer PA
Body colour: black
Cap colour: yellow
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 45mm; Int.thread: M8; 13mm; H: 26mm; technopolymer PA
Type of mounting element: knob
Diameter: 45mm
Internal thread: M8
Thread length: 13mm
Height: 26mm
Body material: technopolymer PA
Body colour: black
Cap colour: yellow
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
товару немає в наявності
В кошику
од. на суму грн.
| 221641-C3 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 70mm; Int.thread: M16; 17mm; H: 35mm; technopolymer PA
Type of mounting element: knob
Diameter: 70mm
Internal thread: M16
Thread length: 17mm
Height: 35mm
Body material: technopolymer PA
Body colour: black
Cap colour: grey
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
Category: Knobs
Description: Knob; Ø: 70mm; Int.thread: M16; 17mm; H: 35mm; technopolymer PA
Type of mounting element: knob
Diameter: 70mm
Internal thread: M16
Thread length: 17mm
Height: 35mm
Body material: technopolymer PA
Body colour: black
Cap colour: grey
Boss material: brass
Mounting: screwed fole
Manufacturer series: ERGOSTYLE®
товару немає в наявності
В кошику
од. на суму грн.
| VCT.43 P-M6X25-SOFT-C2 |
|
Виробник: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 43mm; Ext.thread: M6; 25mm; H: 29mm; technopolymer PP
Type of mounting element: knob
Diameter: 43mm
External thread: M6
Thread pitch: 1
Thread length: 25mm
Height: 29mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: orange
Manufacturer series: VCT.SOFT
Category: Knobs
Description: Knob; Ø: 43mm; Ext.thread: M6; 25mm; H: 29mm; technopolymer PP
Type of mounting element: knob
Diameter: 43mm
External thread: M6
Thread pitch: 1
Thread length: 25mm
Height: 29mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: orange
Manufacturer series: VCT.SOFT
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.3-6-45 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 21kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 6mm
Working part length: 45mm
Shearing force: 21kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 21kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 6mm
Working part length: 45mm
Shearing force: 21kN
товару немає в наявності
В кошику
од. на суму грн.
| CFG.60/60 SH-6 |
|
Виробник: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 114mm; technopolymer PA; black; H: 36mm; for profiles
Application: for profiles
Type of mounting element: hinge
Pin material: nickel plated steel
Material: technopolymer PA
Panel cutout diameter: 6.5mm
Height: 36mm
Mounting holes pitch: 65mm
Width: 114mm
Colour: black
Category: Hinges
Description: Hinge; Width: 114mm; technopolymer PA; black; H: 36mm; for profiles
Application: for profiles
Type of mounting element: hinge
Pin material: nickel plated steel
Material: technopolymer PA
Panel cutout diameter: 6.5mm
Height: 36mm
Mounting holes pitch: 65mm
Width: 114mm
Colour: black
на замовлення 2 шт:
термін постачання 21-30 дні (днів)| Кількість | Ціна |
|---|---|
| 1+ | 708.44 грн |
| GN 113.8-8-40 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 40mm
Shearing force: 63kN
Category: Locking pins
Description: Locking pin; with locking,with knob; stainless steel; Ø: 8mm
Type of protective element: locking pin
Version: with knob; with locking
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 40mm
Shearing force: 63kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.3-8-10 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 38kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 10mm
Shearing force: 38kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 38kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 10mm
Shearing force: 38kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 113.3-8-100 |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 38kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 100mm
Shearing force: 38kN
Category: Locking pins
Description: Locking pin; without handle,with locking; stainless steel; 38kN
Type of protective element: locking pin
Version: with locking; without handle
Plunger material: stainless steel
Plunger diameter: 8mm
Working part length: 100mm
Shearing force: 38kN
товару немає в наявності
В кошику
од. на суму грн.
| GN 111.2-200-30-A-TR |
|
Виробник: ELESA+GANTER
Category: Locking pins
Description: Retaining cable; with 2 key rings; Plating: PVC; stainless steel
Type of protective element: retaining cable
Version: with 2 key rings
Plating material: PVC
Material: stainless steel
Length: 0.2m
Body colour: transparent
D1 dimension: 30mm
Category: Locking pins
Description: Retaining cable; with 2 key rings; Plating: PVC; stainless steel
Type of protective element: retaining cable
Version: with 2 key rings
Plating material: PVC
Material: stainless steel
Length: 0.2m
Body colour: transparent
D1 dimension: 30mm
товару немає в наявності
В кошику
од. на суму грн.