9014140000 Weidmüller
Виробник: Weidmüller
Description: TOOL HAND CRIMPER 12-24AWG SIDE
Packaging: Bulk
For Use With/Related Products: Contacts
Tool Type: Hand Crimper
Wire Gauge or Range - AWG: 12-24 AWG
Part Status: Active
Tool Method: Manual
Ratcheting: Ratchet
Wire Entry Location: Side Entry
Description: TOOL HAND CRIMPER 12-24AWG SIDE
Packaging: Bulk
For Use With/Related Products: Contacts
Tool Type: Hand Crimper
Wire Gauge or Range - AWG: 12-24 AWG
Part Status: Active
Tool Method: Manual
Ratcheting: Ratchet
Wire Entry Location: Side Entry
на замовлення 1 шт:
термін постачання 21-31 дні (днів)
Кількість | Ціна без ПДВ |
---|---|
1+ | 48101.51 грн |
Відгуки про товар
Написати відгук
Технічний опис 9014140000 Weidmüller
Category: Crimping Tools for Terminals, Description: Tool: for crimping; non-insulated terminals; 0.22÷2.5mm2, Type of tool: for crimping, Crimp tool application: non-insulated terminals, Wire cross-section: 0.22...2.5mm2, Wire size: 24AWG...13AWG, Length: 205mm, Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; blackened tool; ergonomic pads on handles; positioner for precise positioning of the crimped terminal in the tool; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle.
Інші пропозиції 9014140000 за ціною від 41100.21 грн до 66846.34 грн
Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
9014140000 | Виробник : Weidmuller | Crimpers / Crimping Tools HTF DFF |
на замовлення 3 шт: термін постачання 21-30 дні (днів) |
|
|||||||||||||||||
9014140000 | Виробник : Weidmuller | Crimping Tools For Ferrules |
на замовлення 1 шт: термін постачання 21-31 дні (днів) |
|
|||||||||||||||||
9014140000 | Виробник : WEIDMЬLLER | WDM-HTFDFF Crimping Tools for Terminals |
товар відсутній |
||||||||||||||||||
9014140000 | Виробник : WEIDMÜLLER |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals; 0.22÷2.5mm2 Type of tool: for crimping Crimp tool application: non-insulated terminals Wire cross-section: 0.22...2.5mm2 Wire size: 24AWG...13AWG Length: 205mm Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; blackened tool; ergonomic pads on handles; positioner for precise positioning of the crimped terminal in the tool; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle |
товар відсутній |