97 52 04 KNIPEX
Виробник: KNIPEX
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals; 0.1÷2.5mm2
Type of tool: for crimping
Crimp tool application: non-insulated terminals
Wire cross-section: 0.1...2.5mm2
Wire size: 27AWG...13AWG
Length: 250mm
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; handles fitted with plastic sleeves; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool made of tempered steel
Tool material: chrome - vanadium steel
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals; 0.1÷2.5mm2
Type of tool: for crimping
Crimp tool application: non-insulated terminals
Wire cross-section: 0.1...2.5mm2
Wire size: 27AWG...13AWG
Length: 250mm
Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; handles fitted with plastic sleeves; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool made of tempered steel
Tool material: chrome - vanadium steel
на замовлення 1 шт:
термін постачання 21-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 9382.42 грн |
Відгуки про товар
Написати відгук
Технічний опис 97 52 04 KNIPEX
Category: Crimping Tools for Terminals, Description: Tool: for crimping; non-insulated terminals; 0.1÷2.5mm2, Type of tool: for crimping, Crimp tool application: non-insulated terminals, Wire cross-section: 0.1...2.5mm2, Wire size: 27AWG...13AWG, Length: 250mm, Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; handles fitted with plastic sleeves; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool made of tempered steel, Tool material: chrome - vanadium steel.
Інші пропозиції 97 52 04 за ціною від 11258.9 грн до 11258.9 грн
| Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ | ||||
|---|---|---|---|---|---|---|---|---|---|
|
|
97 52 04 | Виробник : KNIPEX |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals; 0.1÷2.5mm2 Type of tool: for crimping Crimp tool application: non-insulated terminals Wire cross-section: 0.1...2.5mm2 Wire size: 27AWG...13AWG Length: 250mm Crimp tool features: a modified lever mechanism enables to operate with lower force in comparison with standard tools; a ratched mechanism serves also as a handle lock; blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; handles fitted with plastic sleeves; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool made of tempered steel Tool material: chrome - vanadium steel |
на замовлення 1 шт: термін постачання 7-14 дні (днів) |
|