HT-504
  • HT-504
  • HT-504
  • HT-504
  • HT-504
  • HT-504

HT-504 SMT ELECTRONIC TECHNOLOGY


Виробник: SMT ELECTRONIC TECHNOLOGY
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Tool material: steel
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: non-insulated terminals
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Length: 320mm
Type of tool: for crimping
на замовлення 42 шт:

термін постачання 21-30 дні (днів)
Кількість Ціна
1+1844.49 грн
2+1620.14 грн
5+1619.35 грн
10+1618.56 грн
В кошику  од. на суму  грн.
Відгуки про товар
Написати відгук

Технічний опис HT-504 SMT ELECTRONIC TECHNOLOGY

Category: Crimping Tools for Terminals, Description: Tool: for crimping; non-insulated terminals, Tool material: steel, Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle, Crimp tool application: non-insulated terminals, Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2, Length: 320mm, Type of tool: for crimping, кількість в упаковці: 1 шт.

Інші пропозиції HT-504 за ціною від 1869.14 грн до 2213.39 грн

Фото Назва Виробник Інформація Доступність
Ціна
HT-504
+4
HT-504 Виробник : SMT ELECTRONIC TECHNOLOGY Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals
Tool material: steel
Crimp tool features: ergonomic pads on handles; increased length levers enable to operate with lower force; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: non-insulated terminals
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2; 16mm2
Length: 320mm
Type of tool: for crimping
кількість в упаковці: 1 шт
на замовлення 42 шт:
термін постачання 14-21 дні (днів)
Кількість Ціна
1+2213.39 грн
2+2018.94 грн
5+1943.22 грн
10+1942.27 грн
50+1869.14 грн
В кошику  од. на суму  грн.
HT-504 HT-504
Код товару: 20635
Додати до обраних Обраний товар

Виробник : Hanlong Інструмент > Обжимний інструмент
Тип: Обжимной инструмент
Опис: 12,4" (315мм) для обжима терминалов AWG:20-6 (DIN:1,5-16мм кв.)
товару немає в наявності
В кошику  од. на суму  грн.