| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
00806017 | GSR |
 Category: Threaded InsertionsDescription: Threaded insert; stainless steel; M6; L: 9mm; Pitch: 1 Material: stainless steel Application: for thread repair Type of mounting element: threaded insert Thread: M6 Length: 9mm Thread pitch: 1 |
на замовлення 90 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00806018 | GSR |
Category: Threaded Insertions Description: Threaded insert; stainless steel; M6; L: 15mm; Pitch: 1 Material: stainless steel Application: for thread repair Thread: M6 Type of mounting element: threaded insert Length: 15mm Thread pitch: 1 |
на замовлення 100 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 00806040 | GSR |
Category: Threaded Insertions Description: Threaded insert; stainless steel; M12; L: 12mm; Pitch: 1 Type of mounting element: threaded insert Material: stainless steel Thread: M12 Length: 12mm Thread pitch: 1 Application: for thread repair |
товару немає в наявності |
Мінімальне замовлення: 10 шт В кошику од. на суму грн. | |||||||
| 00831010 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 10; 2; L: 110mm; Holder: square,machine; 5.5mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 10 Thread pitch: 2 Length: 0.11m Working part length: 63mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 5.5mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00831020 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 10; 3; L: 125mm; Holder: square,machine; 5.5mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 10 Thread pitch: 3 Length: 125mm Working part length: 75mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 5.5mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00831040 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 12; 3; L: 165mm; Holder: square,machine; 6.2mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 12 Thread pitch: 3 Length: 165mm Working part length: 111mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 6.2mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00831060 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 14; 3; L: 140mm; Holder: square,machine; 8mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 14 Thread pitch: 3 Length: 140mm Working part length: 85mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00831070 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 14; 4; L: 170mm; Holder: square,machine; 8mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 14 Thread pitch: 4 Length: 170mm Working part length: 112mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00831090 | GSR |
Category: Threading Dies and Taps Description: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 16 Thread pitch: 4 Length: 0.18m Working part length: 116mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
00902020 | GSR |
Category: Screw Extractors Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24 Type of tools set: screw extractor Kind of holder: hand Range of values: M3-M24 |
на замовлення 2 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 00903000 | GSR |
Category: Screw Extractors Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand Length: 51mm Range of values: M3-M6 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903010 | GSR |
Category: Screw Extractors Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand Length: 60mm Range of values: M6-M8 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903020 | GSR |
Category: Screw Extractors Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand Length: 68mm Range of values: M8-M11 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903030 | GSR |
Category: Screw Extractors Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand Length: 76mm Range of values: M11-M14 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903040 | GSR |
Category: Screw Extractors Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand Length: 86mm Range of values: M14-M18 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903050 | GSR |
Category: Screw Extractors Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand Length: 95mm Range of values: M18-M24 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903060 | GSR |
Category: Screw Extractors Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand Length: 0.1m Range of values: M24-M33 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903070 | GSR |
Category: Screw Extractors Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand Length: 105mm Range of values: M33-M50 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00955025 | GSR |
Category: Drills for Metal Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical Material: high speed steel grounded HSS-G Type of power tool accessories: screw starter Kind of drill bit: for metal Drill diameter: 2.5mm Working part length: 6.3mm Length: 0.12m Kind of holder: cylindrical Conform to the norm: DIN 333 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00956040 | GSR |
Category: Drills for Metal Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm Type of power tool accessories: screw starter Kind of drill bit: for metal Drill diameter: 4mm Length: 67mm Material: high speed steel grounded HSS-G Working part length: 14mm Conform to the norm: DIN 333 Kind of holder: cylindrical |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
01004080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Conform to the norm: DIN 371 B; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M2 Thread pitch: 0.4 Length: 45mm Working part length: 8mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Kind of thread: metric; right hand thread |
на замовлення 15 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 9mm Kind of thread: metric; right hand thread |
на замовлення 12 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M3 Thread pitch: 0.5 Length: 56mm Working part length: 11mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M4 Thread pitch: 0.7 Length: 63mm Working part length: 13mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 3.4mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M5 Thread pitch: 0.8 Length: 70mm Working part length: 16mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M6 Thread pitch: 1 Length: 80mm Working part length: 19mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 22mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Conform to the norm: DIN 371 B; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Thread: M4 Kind of thread: metric; right hand thread Plating material: VAP Holder socket size - mm: 3.4mm Working part length: 13mm Length: 63mm Thread pitch: 0.7 |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Plating material: VAP Working part length: 22mm Kind of thread: metric; right hand thread |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Plating material: VAP Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Working part length: 9mm Kind of thread: metric; right hand thread Tools features: spiral angle 35° |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: M3 Length: 56mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 7mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 10mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Thread: M6 Length: 80mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 12mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Tools features: spiral angle 35° Working part length: 16mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Type of tool: tap Thread: M10 Length: 0.1m Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 8mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 16mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Kind of thread: metric; right hand thread Plating material: VAP Tools features: spiral angle 35° |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M3 Plating material: VAP Thread pitch: 0.5 Tools features: spiral angle 35° Length: 56mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
01016170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Tools application: for blind holes Thread: M6 Plating material: VAP Thread pitch: 1 Tools features: spiral angle 35° Length: 80mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread Material: high speed steel cobalt HSS-E |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Plating material: VAP Tools features: spiral angle 35° Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Plating material: VAP Type of tool: tap Conform to the norm: DIN 371 C; DIN 2184-1 Tools application: for blind holes Thread: M10 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Holder socket size - mm: 8mm Length: 0.1m Thread pitch: 1.5 Material: high speed steel cobalt HSS-E |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 01029130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Working part length: 9mm Length: 56mm Thread pitch: 0.5 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 2.7mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Working part length: 12mm Length: 63mm Thread pitch: 0.7 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M4 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 3.4mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M5 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Working part length: 15mm Length: 80mm Thread pitch: 1 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M6 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Thread: M10 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 8mm Working part length: 20mm Length: 0.1m Thread pitch: 1.5 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01030340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm Tools application: to the through holes Conform to the norm: DIN 376; DIN 2184-1 Material: high speed steel cobalt HSS-E Kind of thread: metric; right hand thread Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 20mm Length: 0.18m Working part length: 42mm Thread pitch: 3.5 Thread: M33 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01033210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Plating material: VAP Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP Thread pitch: 1.75 Plating material: VAP Kind of thread: metric; right hand thread Thread: M12 Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Tools application: to the through holes Holder socket size - mm: 7mm Working part length: 23mm Length: 0.11m |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 140mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M22 Thread pitch: 2.5 Working part length: 30mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M24 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M27 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 16mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP Length: 0.18m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M30 Thread pitch: 3.5 Working part length: 40mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 18mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. |
| 00806017 |
|
Виробник: GSR
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M6; L: 9mm; Pitch: 1
Material: stainless steel
Application: for thread repair
Type of mounting element: threaded insert
Thread: M6
Length: 9mm
Thread pitch: 1
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M6; L: 9mm; Pitch: 1
Material: stainless steel
Application: for thread repair
Type of mounting element: threaded insert
Thread: M6
Length: 9mm
Thread pitch: 1
на замовлення 90 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 20+ | 28.19 грн |
| 50+ | 23.27 грн |
| 00806018 |
|
Виробник: GSR
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M6; L: 15mm; Pitch: 1
Material: stainless steel
Application: for thread repair
Thread: M6
Type of mounting element: threaded insert
Length: 15mm
Thread pitch: 1
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M6; L: 15mm; Pitch: 1
Material: stainless steel
Application: for thread repair
Thread: M6
Type of mounting element: threaded insert
Length: 15mm
Thread pitch: 1
на замовлення 100 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 20+ | 28.19 грн |
| 50+ | 23.27 грн |
| 100+ | 21.85 грн |
| 00806040 |
|
Виробник: GSR
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M12; L: 12mm; Pitch: 1
Type of mounting element: threaded insert
Material: stainless steel
Thread: M12
Length: 12mm
Thread pitch: 1
Application: for thread repair
Category: Threaded Insertions
Description: Threaded insert; stainless steel; M12; L: 12mm; Pitch: 1
Type of mounting element: threaded insert
Material: stainless steel
Thread: M12
Length: 12mm
Thread pitch: 1
Application: for thread repair
товару немає в наявності
Мінімальне замовлення: 10 шт
В кошику
од. на суму грн.
| 00831010 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 10; 2; L: 110mm; Holder: square,machine; 5.5mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 10
Thread pitch: 2
Length: 0.11m
Working part length: 63mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 5.5mm
Category: Threading Dies and Taps
Description: Tap; Tr 10; 2; L: 110mm; Holder: square,machine; 5.5mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 10
Thread pitch: 2
Length: 0.11m
Working part length: 63mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 5.5mm
товару немає в наявності
В кошику
од. на суму грн.
| 00831020 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 10; 3; L: 125mm; Holder: square,machine; 5.5mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 10
Thread pitch: 3
Length: 125mm
Working part length: 75mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 5.5mm
Category: Threading Dies and Taps
Description: Tap; Tr 10; 3; L: 125mm; Holder: square,machine; 5.5mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 10
Thread pitch: 3
Length: 125mm
Working part length: 75mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 5.5mm
товару немає в наявності
В кошику
од. на суму грн.
| 00831040 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 12; 3; L: 165mm; Holder: square,machine; 6.2mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 12
Thread pitch: 3
Length: 165mm
Working part length: 111mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Category: Threading Dies and Taps
Description: Tap; Tr 12; 3; L: 165mm; Holder: square,machine; 6.2mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 12
Thread pitch: 3
Length: 165mm
Working part length: 111mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
товару немає в наявності
В кошику
од. на суму грн.
| 00831060 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 14; 3; L: 140mm; Holder: square,machine; 8mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 14
Thread pitch: 3
Length: 140mm
Working part length: 85mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Category: Threading Dies and Taps
Description: Tap; Tr 14; 3; L: 140mm; Holder: square,machine; 8mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 14
Thread pitch: 3
Length: 140mm
Working part length: 85mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00831070 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 14; 4; L: 170mm; Holder: square,machine; 8mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 14
Thread pitch: 4
Length: 170mm
Working part length: 112mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Category: Threading Dies and Taps
Description: Tap; Tr 14; 4; L: 170mm; Holder: square,machine; 8mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 14
Thread pitch: 4
Length: 170mm
Working part length: 112mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
товару немає в наявності
В кошику
од. на суму грн.
| 00831090 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 16
Thread pitch: 4
Length: 0.18m
Working part length: 116mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
Category: Threading Dies and Taps
Description: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 16
Thread pitch: 4
Length: 0.18m
Working part length: 116mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
товару немає в наявності
В кошику
од. на суму грн.
| 00902020 |
|
Виробник: GSR
Category: Screw Extractors
Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24
Type of tools set: screw extractor
Kind of holder: hand
Range of values: M3-M24
Category: Screw Extractors
Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24
Type of tools set: screw extractor
Kind of holder: hand
Range of values: M3-M24
на замовлення 2 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 704.28 грн |
| 00903000 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand
Length: 51mm
Range of values: M3-M6
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand
Length: 51mm
Range of values: M3-M6
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903010 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand
Length: 60mm
Range of values: M6-M8
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand
Length: 60mm
Range of values: M6-M8
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903020 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand
Length: 68mm
Range of values: M8-M11
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand
Length: 68mm
Range of values: M8-M11
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903030 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand
Length: 76mm
Range of values: M11-M14
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand
Length: 76mm
Range of values: M11-M14
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903040 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand
Length: 86mm
Range of values: M14-M18
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand
Length: 86mm
Range of values: M14-M18
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903050 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand
Length: 95mm
Range of values: M18-M24
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand
Length: 95mm
Range of values: M18-M24
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903060 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand
Length: 0.1m
Range of values: M24-M33
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand
Length: 0.1m
Range of values: M24-M33
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903070 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand
Length: 105mm
Range of values: M33-M50
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand
Length: 105mm
Range of values: M33-M50
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00955025 |
|
Виробник: GSR
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical
Material: high speed steel grounded HSS-G
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 2.5mm
Working part length: 6.3mm
Length: 0.12m
Kind of holder: cylindrical
Conform to the norm: DIN 333
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical
Material: high speed steel grounded HSS-G
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 2.5mm
Working part length: 6.3mm
Length: 0.12m
Kind of holder: cylindrical
Conform to the norm: DIN 333
товару немає в наявності
В кошику
од. на суму грн.
| 00956040 |
|
Виробник: GSR
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 4mm
Length: 67mm
Material: high speed steel grounded HSS-G
Working part length: 14mm
Conform to the norm: DIN 333
Kind of holder: cylindrical
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 4mm
Length: 67mm
Material: high speed steel grounded HSS-G
Working part length: 14mm
Conform to the norm: DIN 333
Kind of holder: cylindrical
товару немає в наявності
В кошику
од. на суму грн.
| 01004080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M2
Thread pitch: 0.4
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M2
Thread pitch: 0.4
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Kind of thread: metric; right hand thread
на замовлення 15 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 511.88 грн |
| 3+ | 422.96 грн |
| 5+ | 396.37 грн |
| 01004110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 9mm
Kind of thread: metric; right hand thread
на замовлення 12 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 477.87 грн |
| 3+ | 393.88 грн |
| 5+ | 369.78 грн |
| 01004130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 403.59 грн |
| 3+ | 333.22 грн |
| 5+ | 313.27 грн |
| 01004150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 386.59 грн |
| 3+ | 319.92 грн |
| 5+ | 299.98 грн |
| 01004170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 442.97 грн |
| 3+ | 366.46 грн |
| 5+ | 344.02 грн |
| 01004190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 442.97 грн |
| 3+ | 366.46 грн |
| 5+ | 344.02 грн |
| 01004210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 551.25 грн |
| 3+ | 454.54 грн |
| 5+ | 427.12 грн |
| 01004230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 774.08 грн |
| 3+ | 639.01 грн |
| 5+ | 599.13 грн |
| 01005150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 723.07 грн |
| 3+ | 596.63 грн |
| 5+ | 559.24 грн |
| 01005210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Plating material: VAP
Working part length: 22mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Plating material: VAP
Working part length: 22mm
Kind of thread: metric; right hand thread
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 954.84 грн |
| 3+ | 788.59 грн |
| 5+ | 739.56 грн |
| 01005230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1158.88 грн |
| 3+ | 957.27 грн |
| 5+ | 897.44 грн |
| 01015080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 488.61 грн |
| 3+ | 403.85 грн |
| 5+ | 378.92 грн |
| 01015110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 460.87 грн |
| 3+ | 380.58 грн |
| 01015130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 415.23 грн |
| 3+ | 343.19 грн |
| 5+ | 321.58 грн |
| 01015150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 398.22 грн |
| 3+ | 329.06 грн |
| 5+ | 308.29 грн |
| 01015170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 455.50 грн |
| 3+ | 375.60 грн |
| 5+ | 352.33 грн |
| 01015190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 455.50 грн |
| 3+ | 375.60 грн |
| 5+ | 352.33 грн |
| 01015210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 568.25 грн |
| 3+ | 469.50 грн |
| 5+ | 440.41 грн |
| 01015230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 797.34 грн |
| 3+ | 657.29 грн |
| 5+ | 616.58 грн |
| 01016080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 978.11 грн |
| 3+ | 802.71 грн |
| 01016110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of thread: metric; right hand thread
Plating material: VAP
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of thread: metric; right hand thread
Plating material: VAP
Tools features: spiral angle 35°
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 915.47 грн |
| 3+ | 751.19 грн |
| 01016130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 774.08 грн |
| 3+ | 639.01 грн |
| 5+ | 599.13 грн |
| 01016150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 774.08 грн |
| 3+ | 639.01 грн |
| 5+ | 599.13 грн |
| 01016170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 797.34 грн |
| 3+ | 657.29 грн |
| 5+ | 616.58 грн |
| 01016190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 797.34 грн |
| 3+ | 657.29 грн |
| 5+ | 616.58 грн |
| 01016210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 903.84 грн |
| 3+ | 746.21 грн |
| 5+ | 699.67 грн |
| 01016230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Plating material: VAP
Type of tool: tap
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 8mm
Length: 0.1m
Thread pitch: 1.5
Material: high speed steel cobalt HSS-E
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Plating material: VAP
Type of tool: tap
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 8mm
Length: 0.1m
Thread pitch: 1.5
Material: high speed steel cobalt HSS-E
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1234.94 грн |
| 3+ | 1019.60 грн |
| 5+ | 961.43 грн |
| 01029130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01029230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01030340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
товару немає в наявності
В кошику
од. на суму грн.
| 01033210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01034250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
товару немає в наявності
В кошику
од. на суму грн.
| 01034300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.