| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00831090 | GSR |
 Category: Threading Dies and TapsDescription: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm Kind of thread: right hand thread; TR Material: high speed steel grounded HSS-G Tools application: for to nuts; to the through holes Thread: Tr 16 Thread pitch: 4 Length: 0.18m Working part length: 116mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
00902020 | GSR |
Category: Screw Extractors Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24 Type of tools set: screw extractor Kind of holder: hand Range of values: M3-M24 |
на замовлення 2 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00903000 | GSR |
Category: Screw Extractors Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand Type of tool: screw extractor Length: 51mm Range of values: M3-M6 Kind of holder: hand; square |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00903010 | GSR |
Category: Screw Extractors Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand Type of tool: screw extractor Length: 60mm Range of values: M6-M8 Kind of holder: hand; square |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00903020 | GSR |
Category: Screw Extractors Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand Type of tool: screw extractor Length: 68mm Range of values: M8-M11 Kind of holder: hand; square |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
00903030 | GSR |
Category: Screw Extractors Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand Type of tool: screw extractor Length: 76mm Range of values: M11-M14 Kind of holder: hand; square |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 00903040 | GSR |
Category: Screw Extractors Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand Length: 86mm Range of values: M14-M18 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
00903050 | GSR |
Category: Screw Extractors Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand Type of tool: screw extractor Length: 95mm Range of values: M18-M24 Kind of holder: hand; square |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 00903060 | GSR |
Category: Screw Extractors Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand Length: 0.1m Range of values: M24-M33 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00903070 | GSR |
Category: Screw Extractors Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand Length: 105mm Range of values: M33-M50 Type of tool: screw extractor Kind of holder: hand; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00950063 | GSR |
Category: Drills for Metal Description: Screw starter; for metal; Ø: 6.3mm; L: 71mm; Working part len: 16mm Conform to the norm: DIN 333 Material: high speed steel grounded HSS-G Kind of drill bit: for metal Length: 71mm Working part length: 16mm Kind of holder: cylindrical Type of power tool accessories: screw starter Drill diameter: 6.3mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00955025 | GSR |
Category: Drills for Metal Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical Material: high speed steel grounded HSS-G Type of power tool accessories: screw starter Kind of drill bit: for metal Drill diameter: 2.5mm Working part length: 6.3mm Length: 0.12m Kind of holder: cylindrical Conform to the norm: DIN 333 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 00956040 | GSR |
Category: Drills for Metal Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm Type of power tool accessories: screw starter Kind of drill bit: for metal Drill diameter: 4mm Length: 67mm Material: high speed steel grounded HSS-G Working part length: 14mm Conform to the norm: DIN 333 Kind of holder: cylindrical |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
01004080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Conform to the norm: DIN 371 B; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M2 Thread pitch: 0.4 Length: 45mm Working part length: 8mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Kind of thread: metric; right hand thread |
на замовлення 15 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 9mm Kind of thread: metric; right hand thread |
на замовлення 20 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M3 Thread pitch: 0.5 Length: 56mm Working part length: 11mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M4 Thread pitch: 0.7 Length: 63mm Working part length: 13mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 3.4mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M5 Thread pitch: 0.8 Length: 70mm Working part length: 16mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M6 Thread pitch: 1 Length: 80mm Working part length: 19mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M8 Thread pitch: 1.25 Length: 90mm Working part length: 22mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 6.2mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Conform to the norm: DIN 371 B; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Thread: M4 Kind of thread: metric; right hand thread Plating material: VAP Holder socket size - mm: 3.4mm Working part length: 13mm Length: 63mm Thread pitch: 0.7 |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Plating material: VAP Working part length: 22mm Kind of thread: metric; right hand thread |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Plating material: VAP Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Working part length: 9mm Kind of thread: metric; right hand thread Tools features: spiral angle 35° |
на замовлення 12 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: M3 Length: 56mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 7mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 10mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Thread: M6 Length: 80mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 12mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Tools features: spiral angle 35° Working part length: 16mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Type of tool: tap Thread: M10 Length: 0.1m Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 8mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 16mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Kind of thread: metric; right hand thread Plating material: VAP Tools features: spiral angle 35° |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M3 Plating material: VAP Thread pitch: 0.5 Tools features: spiral angle 35° Length: 56mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
01016170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Tools application: for blind holes Thread: M6 Plating material: VAP Thread pitch: 1 Tools features: spiral angle 35° Length: 80mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread Material: high speed steel cobalt HSS-E |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Plating material: VAP Tools features: spiral angle 35° Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Plating material: VAP Type of tool: tap Conform to the norm: DIN 371 C; DIN 2184-1 Tools application: for blind holes Thread: M10 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Holder socket size - mm: 8mm Length: 0.1m Thread pitch: 1.5 Material: high speed steel cobalt HSS-E |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 01029130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Working part length: 9mm Length: 56mm Thread pitch: 0.5 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 2.7mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Working part length: 12mm Length: 63mm Thread pitch: 0.7 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M4 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 3.4mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M5 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Working part length: 15mm Length: 80mm Thread pitch: 1 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M6 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Thread: M10 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 8mm Working part length: 20mm Length: 0.1m Thread pitch: 1.5 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01030340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm Tools application: to the through holes Conform to the norm: DIN 376; DIN 2184-1 Material: high speed steel cobalt HSS-E Kind of thread: metric; right hand thread Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 20mm Length: 0.18m Working part length: 42mm Thread pitch: 3.5 Thread: M33 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01033210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Plating material: VAP Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP Thread pitch: 1.75 Plating material: VAP Kind of thread: metric; right hand thread Thread: M12 Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Tools application: to the through holes Holder socket size - mm: 7mm Working part length: 23mm Length: 0.11m |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 140mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M22 Thread pitch: 2.5 Working part length: 30mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M24 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M27 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 16mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP Length: 0.18m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M30 Thread pitch: 3.5 Working part length: 40mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 18mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP Length: 0.18m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M33 Thread pitch: 3.5 Working part length: 42mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 20mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034350 | GSR |
Category: Threading Dies and Taps Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP Length: 0.2m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M36 Thread pitch: 4 Working part length: 50mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01035170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Conform to the norm: DIN 371; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Kind of thread: metric; right hand thread Thread: M5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm Type of tool: tap Thread: M22 Thread pitch: 2.5 Length: 140mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 14.5mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 25mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm Type of tool: tap Thread: M24 Thread pitch: 3 Length: 160mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 14.5mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes Type of tool: tap Thread: M27 Thread pitch: 3 Length: 160mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 16mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm Type of tool: tap Thread: M30 Thread pitch: 3.5 Length: 0.18m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 18mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 35mm |
товару немає в наявності |
В кошику од. на суму грн. |
| 00831090 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 16
Thread pitch: 4
Length: 0.18m
Working part length: 116mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
Category: Threading Dies and Taps
Description: Tap; Tr 16; 4; L: 180mm; Holder: square,machine; 9mm
Kind of thread: right hand thread; TR
Material: high speed steel grounded HSS-G
Tools application: for to nuts; to the through holes
Thread: Tr 16
Thread pitch: 4
Length: 0.18m
Working part length: 116mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
товару немає в наявності
В кошику
од. на суму грн.
| 00902020 |
|
Виробник: GSR
Category: Screw Extractors
Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24
Type of tools set: screw extractor
Kind of holder: hand
Range of values: M3-M24
Category: Screw Extractors
Description: Tools set: screw extractor; Holder: hand; Range of val: M3-M24
Type of tools set: screw extractor
Kind of holder: hand
Range of values: M3-M24
на замовлення 2 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 719.05 грн |
| 00903000 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand
Type of tool: screw extractor
Length: 51mm
Range of values: M3-M6
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 51mm; Range of val: M3-M6; square,hand
Type of tool: screw extractor
Length: 51mm
Range of values: M3-M6
Kind of holder: hand; square
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 7+ | 72.18 грн |
| 8+ | 55.99 грн |
| 00903010 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand
Type of tool: screw extractor
Length: 60mm
Range of values: M6-M8
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 60mm; Range of val: M6-M8; square,hand
Type of tool: screw extractor
Length: 60mm
Range of values: M6-M8
Kind of holder: hand; square
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 6+ | 85.88 грн |
| 7+ | 66.18 грн |
| 00903020 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand
Type of tool: screw extractor
Length: 68mm
Range of values: M8-M11
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 68mm; Range of val: M8-M11; square,hand
Type of tool: screw extractor
Length: 68mm
Range of values: M8-M11
Kind of holder: hand; square
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 92.28 грн |
| 6+ | 71.27 грн |
| 00903030 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand
Type of tool: screw extractor
Length: 76mm
Range of values: M11-M14
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 76mm; Range of val: M11-M14; square,hand
Type of tool: screw extractor
Length: 76mm
Range of values: M11-M14
Kind of holder: hand; square
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 5+ | 86.54 грн |
| 00903040 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand
Length: 86mm
Range of values: M14-M18
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 86mm; Range of val: M14-M18; square,hand
Length: 86mm
Range of values: M14-M18
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903050 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand
Type of tool: screw extractor
Length: 95mm
Range of values: M18-M24
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 95mm; Range of val: M18-M24; square,hand
Type of tool: screw extractor
Length: 95mm
Range of values: M18-M24
Kind of holder: hand; square
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 324.35 грн |
| 3+ | 267.25 грн |
| 5+ | 251.13 грн |
| 00903060 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand
Length: 0.1m
Range of values: M24-M33
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 100mm; Range of val: M24-M33; square,hand
Length: 0.1m
Range of values: M24-M33
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00903070 |
|
Виробник: GSR
Category: Screw Extractors
Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand
Length: 105mm
Range of values: M33-M50
Type of tool: screw extractor
Kind of holder: hand; square
Category: Screw Extractors
Description: Screw extractor; 105mm; Range of val: M33-M50; square,hand
Length: 105mm
Range of values: M33-M50
Type of tool: screw extractor
Kind of holder: hand; square
товару немає в наявності
В кошику
од. на суму грн.
| 00950063 |
|
Виробник: GSR
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 6.3mm; L: 71mm; Working part len: 16mm
Conform to the norm: DIN 333
Material: high speed steel grounded HSS-G
Kind of drill bit: for metal
Length: 71mm
Working part length: 16mm
Kind of holder: cylindrical
Type of power tool accessories: screw starter
Drill diameter: 6.3mm
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 6.3mm; L: 71mm; Working part len: 16mm
Conform to the norm: DIN 333
Material: high speed steel grounded HSS-G
Kind of drill bit: for metal
Length: 71mm
Working part length: 16mm
Kind of holder: cylindrical
Type of power tool accessories: screw starter
Drill diameter: 6.3mm
товару немає в наявності
В кошику
од. на суму грн.
| 00955025 |
|
Виробник: GSR
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical
Material: high speed steel grounded HSS-G
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 2.5mm
Working part length: 6.3mm
Length: 0.12m
Kind of holder: cylindrical
Conform to the norm: DIN 333
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 2.5mm; L: 120mm; cylindrical
Material: high speed steel grounded HSS-G
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 2.5mm
Working part length: 6.3mm
Length: 0.12m
Kind of holder: cylindrical
Conform to the norm: DIN 333
товару немає в наявності
В кошику
од. на суму грн.
| 00956040 |
|
Виробник: GSR
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 4mm
Length: 67mm
Material: high speed steel grounded HSS-G
Working part length: 14mm
Conform to the norm: DIN 333
Kind of holder: cylindrical
Category: Drills for Metal
Description: Screw starter; for metal; Ø: 4mm; L: 67mm; Working part len: 14mm
Type of power tool accessories: screw starter
Kind of drill bit: for metal
Drill diameter: 4mm
Length: 67mm
Material: high speed steel grounded HSS-G
Working part length: 14mm
Conform to the norm: DIN 333
Kind of holder: cylindrical
товару немає в наявності
В кошику
од. на суму грн.
| 01004080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M2
Thread pitch: 0.4
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M2
Thread pitch: 0.4
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Kind of thread: metric; right hand thread
на замовлення 15 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 522.62 грн |
| 3+ | 431.84 грн |
| 5+ | 404.69 грн |
| 01004110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 9mm
Kind of thread: metric; right hand thread
на замовлення 20 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 487.90 грн |
| 3+ | 402.14 грн |
| 5+ | 377.54 грн |
| 01004130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 412.06 грн |
| 3+ | 340.21 грн |
| 5+ | 319.85 грн |
| 01004150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 394.70 грн |
| 3+ | 326.63 грн |
| 5+ | 306.27 грн |
| 01004170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 452.26 грн |
| 3+ | 374.14 грн |
| 5+ | 351.24 грн |
| 01004190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 452.26 грн |
| 3+ | 374.14 грн |
| 5+ | 351.24 грн |
| 01004210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M8
Thread pitch: 1.25
Length: 90mm
Working part length: 22mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M8
Thread pitch: 1.25
Length: 90mm
Working part length: 22mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 562.82 грн |
| 3+ | 464.08 грн |
| 5+ | 436.08 грн |
| 01004230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 790.32 грн |
| 3+ | 652.42 грн |
| 5+ | 611.70 грн |
| 01005150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 738.24 грн |
| 3+ | 609.15 грн |
| 5+ | 570.97 грн |
| 01005210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Plating material: VAP
Working part length: 22mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Plating material: VAP
Working part length: 22mm
Kind of thread: metric; right hand thread
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 974.88 грн |
| 3+ | 805.13 грн |
| 5+ | 755.08 грн |
| 01005230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1183.19 грн |
| 3+ | 977.36 грн |
| 5+ | 916.27 грн |
| 01015080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 498.86 грн |
| 3+ | 412.32 грн |
| 5+ | 386.87 грн |
| 01015110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
на замовлення 12 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 470.54 грн |
| 3+ | 388.57 грн |
| 5+ | 363.96 грн |
| 01015130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 423.94 грн |
| 3+ | 350.39 грн |
| 5+ | 328.33 грн |
| 01015150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 406.58 грн |
| 3+ | 335.97 грн |
| 5+ | 314.76 грн |
| 01015170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 465.05 грн |
| 3+ | 383.48 грн |
| 5+ | 359.72 грн |
| 01015190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 465.05 грн |
| 3+ | 383.48 грн |
| 5+ | 359.72 грн |
| 01015210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 580.18 грн |
| 3+ | 479.35 грн |
| 5+ | 449.65 грн |
| 01015230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 814.07 грн |
| 3+ | 671.09 грн |
| 5+ | 629.51 грн |
| 01016080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 998.63 грн |
| 3+ | 819.56 грн |
| 01016110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of thread: metric; right hand thread
Plating material: VAP
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of thread: metric; right hand thread
Plating material: VAP
Tools features: spiral angle 35°
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 934.68 грн |
| 3+ | 766.95 грн |
| 01016130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 790.32 грн |
| 3+ | 652.42 грн |
| 5+ | 611.70 грн |
| 01016150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 790.32 грн |
| 3+ | 652.42 грн |
| 5+ | 611.70 грн |
| 01016170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 814.07 грн |
| 3+ | 671.09 грн |
| 5+ | 629.51 грн |
| 01016190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 814.07 грн |
| 3+ | 671.09 грн |
| 5+ | 629.51 грн |
| 01016210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 922.80 грн |
| 3+ | 761.86 грн |
| 5+ | 714.35 грн |
| 01016230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Plating material: VAP
Type of tool: tap
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 8mm
Length: 0.1m
Thread pitch: 1.5
Material: high speed steel cobalt HSS-E
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Plating material: VAP
Type of tool: tap
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 8mm
Length: 0.1m
Thread pitch: 1.5
Material: high speed steel cobalt HSS-E
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1260.85 грн |
| 3+ | 1040.99 грн |
| 5+ | 981.60 грн |
| 01029130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01029230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01030340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
товару немає в наявності
В кошику
од. на суму грн.
| 01033210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01034250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
товару немає в наявності
В кошику
од. на суму грн.
| 01034300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M33
Thread pitch: 3.5
Working part length: 42mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M33
Thread pitch: 3.5
Working part length: 42mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034350 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Length: 0.2m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M36
Thread pitch: 4
Working part length: 50mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Length: 0.2m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M36
Thread pitch: 4
Working part length: 50mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01035170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Thread: M5
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Thread: M5
товару немає в наявності
В кошику
од. на суму грн.
| 01038300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M22
Thread pitch: 2.5
Length: 140mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 25mm
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M22
Thread pitch: 2.5
Length: 140mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 25mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M24
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M24
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes
Type of tool: tap
Thread: M27
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 16mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes
Type of tool: tap
Thread: M27
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 16mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Type of tool: tap
Thread: M30
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 18mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Type of tool: tap
Thread: M30
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 18mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
товару немає в наявності
В кошику
од. на суму грн.