| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01004110 | GSR |
 Category: Threading Dies and TapsDescription: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Thread: M2,5 Thread pitch: 0.45 Length: 50mm Material: high speed steel cobalt HSS-E Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread Tools application: to the through holes Working part length: 9mm |
на замовлення 15 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M3 Thread pitch: 0.5 Length: 56mm Working part length: 11mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M4 Thread pitch: 0.7 Length: 63mm Working part length: 13mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 3.4mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M5 Thread pitch: 0.8 Length: 70mm Working part length: 16mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M6 Thread pitch: 1 Length: 80mm Working part length: 19mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 22mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Conform to the norm: DIN 371 B; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Thread: M4 Kind of thread: metric; right hand thread Plating material: VAP Holder socket size - mm: 3.4mm Working part length: 13mm Length: 63mm Thread pitch: 0.7 |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Thread pitch: 1.25 Kind of thread: metric; right hand thread Working part length: 22mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 6.2mm Conform to the norm: DIN 371 B; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M8 Plating material: VAP Length: 90mm |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: to the through holes Thread: M10 Plating material: VAP Thread pitch: 1.5 Length: 0.1m Working part length: 24mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M2 Thread pitch: 0.4 Tools features: spiral angle 35° Length: 45mm Working part length: 8mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 18 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Thread: M2,5 Thread pitch: 0.45 Length: 50mm Material: high speed steel cobalt HSS-E Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread Tools application: for blind holes Tools features: spiral angle 35° Working part length: 9mm |
на замовлення 23 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: M3 Length: 56mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 7mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 10mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Thread: M6 Length: 80mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 12mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Thread pitch: 1.25 Kind of thread: metric; right hand thread Working part length: 16mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 6.2mm Conform to the norm: DIN 371 C; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M8 Tools features: spiral angle 35° Length: 90mm |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Type of tool: tap Thread: M10 Length: 0.1m Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 8mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 16mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP Thread: M2,5 Thread pitch: 0.45 Length: 50mm Material: high speed steel cobalt HSS-E Plating material: VAP Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.1mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread Tools application: for blind holes Tools features: spiral angle 35° |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M3 Plating material: VAP Thread pitch: 0.5 Tools features: spiral angle 35° Length: 56mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
01016170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Tools application: for blind holes Thread: M6 Plating material: VAP Thread pitch: 1 Tools features: spiral angle 35° Length: 80mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 4.9mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of thread: metric; right hand thread Material: high speed steel cobalt HSS-E |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Thread pitch: 1.25 Kind of thread: metric; right hand thread Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 6.2mm Conform to the norm: DIN 371 C; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M8 Plating material: VAP Tools features: spiral angle 35° Length: 90mm |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Kind of thread: metric; right hand thread Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M10 Plating material: VAP Thread pitch: 1.5 Tools features: spiral angle 35° Length: 0.1m Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 8mm Conform to the norm: DIN 371 C; DIN 2184-1 |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 01029130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Working part length: 9mm Length: 56mm Thread pitch: 0.5 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 2.7mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Working part length: 12mm Length: 63mm Thread pitch: 0.7 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M4 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 3.4mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M5 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Working part length: 15mm Length: 80mm Thread pitch: 1 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M6 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Material: high speed steel cobalt HSS-E Thread: M10 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 8mm Working part length: 20mm Length: 0.1m Thread pitch: 1.5 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01030340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm Tools application: to the through holes Conform to the norm: DIN 376; DIN 2184-1 Material: high speed steel cobalt HSS-E Kind of thread: metric; right hand thread Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 20mm Length: 0.18m Working part length: 42mm Thread pitch: 3.5 Thread: M33 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01033210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Plating material: VAP Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP Thread pitch: 1.75 Plating material: VAP Kind of thread: metric; right hand thread Thread: M12 Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Tools application: to the through holes Holder socket size - mm: 7mm Working part length: 23mm Length: 0.11m |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 140mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M22 Thread pitch: 2.5 Working part length: 30mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M24 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 14.5mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP Length: 160mm Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M27 Thread pitch: 3 Working part length: 36mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 16mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP Length: 0.18m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M30 Thread pitch: 3.5 Working part length: 40mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 18mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP Length: 0.18m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M33 Thread pitch: 3.5 Working part length: 42mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 20mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034350 | GSR |
Category: Threading Dies and Taps Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP Length: 0.2m Material: high speed steel cobalt HSS-E Plating material: VAP Tools application: to the through holes Thread: M36 Thread pitch: 4 Working part length: 50mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01035170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Conform to the norm: DIN 371; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Kind of thread: metric; right hand thread Thread: M5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm Type of tool: tap Thread: M22 Thread pitch: 2.5 Length: 140mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 14.5mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 25mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm Type of tool: tap Thread: M24 Thread pitch: 3 Length: 160mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 14.5mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes Type of tool: tap Thread: M27 Thread pitch: 3 Length: 160mm Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 16mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 30mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm Type of tool: tap Thread: M30 Thread pitch: 3.5 Length: 0.18m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 18mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 35mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm Type of tool: tap Thread: M33 Thread pitch: 3.5 Length: 0.18m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 20mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 35mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038350 | GSR |
Category: Threading Dies and Taps Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes Type of tool: tap Thread: M36 Thread pitch: 4 Length: 0.2m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 22mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Working part length: 40mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01039130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN Type of tool: tap Kind of holder: machine; square Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M3 Plating material: TiN Thread pitch: 0.5 Tools features: spiral angle 35° Length: 56mm Working part length: 5mm Holder socket size - mm: 2.7mm Conform to the norm: DIN 371; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01039150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN Type of tool: tap Kind of holder: machine; square Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M4 Plating material: TiN Thread pitch: 0.7 Tools features: spiral angle 35° Length: 63mm Working part length: 7mm Holder socket size - mm: 3.4mm Conform to the norm: DIN 371; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01039170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN Type of tool: tap Kind of holder: machine; square Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M5 Plating material: TiN Thread pitch: 0.8 Tools features: spiral angle 35° Length: 70mm Working part length: 8mm Holder socket size - mm: 4.9mm Conform to the norm: DIN 371; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01039190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Kind of holder: machine; square Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M6 Plating material: TiN Thread pitch: 1 Tools features: spiral angle 35° Length: 80mm Working part length: 10mm Holder socket size - mm: 4.9mm Conform to the norm: DIN 371; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01041150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Kind of holder: machine; square Thread: M4 Kind of thread: metric; right hand thread Conform to the norm: DIN 371; DIN 2184-1 Tools application: for blind holes Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Type of tool: tap Plating material: VAP Holder socket size - mm: 3.4mm Working part length: 7mm Length: 63mm Thread pitch: 0.7 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01042270 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes Type of tool: tap Thread: M16 Thread pitch: 2 Length: 0.11m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 9mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Plating material: VAP Working part length: 20mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01042330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread: M30 Plating material: VAP Thread pitch: 3.5 Tools features: spiral angle 35° Length: 0.18m Working part length: 35mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 18mm Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01042340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: for blind holes Kind of holder: machine; square Thread: M33 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Type of tool: tap Plating material: VAP Holder socket size - mm: 20mm Working part length: 35mm Length: 0.18m Thread pitch: 3.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01046260 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm Conform to the norm: DIN 376; DIN 2184-1 Tools application: to the through holes Thread: M14 Thread pitch: 2 Length: 0.11m Working part length: 25mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 9mm Kind of thread: metric; right hand thread Material: cobalt‑vanadium high‑speed steel HSSE‑V |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01046270 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm Material: cobalt‑vanadium high‑speed steel HSSE‑V Conform to the norm: DIN 376; DIN 2184-1 Thread: M16 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 0.11m Holder socket size - mm: 9mm Working part length: 25mm Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01046320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm Type of tool: tap Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread Material: cobalt‑vanadium high‑speed steel HSSE‑V Tools application: to the through holes Thread: M27 Thread pitch: 3 Length: 160mm Working part length: 36mm Kind of holder: machine; square Holder socket size - mm: 16mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01049130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Tools application: for blind holes Thread: M3 Thread pitch: 0.5 Tools features: spiral angle 40° Length: 56mm Working part length: 5mm Kind of holder: machine; square Type of tool: tap Holder socket size - mm: 2.7mm Conform to the norm: DIN 371; DIN 2184-1 Kind of thread: metric; right hand thread Material: cobalt‑vanadium high‑speed steel HSSE‑V |
товару немає в наявності |
В кошику од. на суму грн. |
| 01004110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: to the through holes
Working part length: 9mm
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: to the through holes
Working part length: 9mm
на замовлення 15 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 486.81 грн |
| 3+ | 401.25 грн |
| 5+ | 376.70 грн |
| 01004130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M3
Thread pitch: 0.5
Length: 56mm
Working part length: 11mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 411.14 грн |
| 3+ | 339.45 грн |
| 5+ | 319.13 грн |
| 01004150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M4
Thread pitch: 0.7
Length: 63mm
Working part length: 13mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 393.82 грн |
| 3+ | 325.91 грн |
| 5+ | 305.59 грн |
| 01004170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M5
Thread pitch: 0.8
Length: 70mm
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 451.26 грн |
| 3+ | 373.31 грн |
| 5+ | 350.46 грн |
| 01004190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M6
Thread pitch: 1
Length: 80mm
Working part length: 19mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 451.26 грн |
| 3+ | 373.31 грн |
| 5+ | 350.46 грн |
| 01004210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 561.56 грн |
| 3+ | 463.04 грн |
| 5+ | 435.11 грн |
| 01004230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 788.56 грн |
| 3+ | 650.97 грн |
| 5+ | 610.33 грн |
| 01005150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 736.60 грн |
| 3+ | 607.80 грн |
| 5+ | 569.70 грн |
| 01005210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Working part length: 22mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M8
Plating material: VAP
Length: 90mm
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Working part length: 22mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 B; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M8
Plating material: VAP
Length: 90mm
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 972.71 грн |
| 3+ | 803.34 грн |
| 5+ | 753.40 грн |
| 01005230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Length: 0.1m
Working part length: 24mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1180.56 грн |
| 3+ | 975.18 грн |
| 5+ | 914.23 грн |
| 01015080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M2
Thread pitch: 0.4
Tools features: spiral angle 35°
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M2
Thread pitch: 0.4
Tools features: spiral angle 35°
Length: 45mm
Working part length: 8mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 18 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 497.75 грн |
| 3+ | 411.40 грн |
| 5+ | 386.01 грн |
| 01015110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 9mm
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 9mm
на замовлення 23 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 469.49 грн |
| 3+ | 387.70 грн |
| 5+ | 363.15 грн |
| 01015130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 423.00 грн |
| 3+ | 349.61 грн |
| 5+ | 327.60 грн |
| 01015150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 2+ | 405.67 грн |
| 3+ | 335.22 грн |
| 5+ | 314.06 грн |
| 01015170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 464.02 грн |
| 3+ | 382.62 грн |
| 5+ | 358.92 грн |
| 01015190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 464.02 грн |
| 3+ | 382.62 грн |
| 5+ | 358.92 грн |
| 01015210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 C; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M8
Tools features: spiral angle 35°
Length: 90mm
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Working part length: 16mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 C; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M8
Tools features: spiral angle 35°
Length: 90mm
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 578.88 грн |
| 3+ | 478.28 грн |
| 01015230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 812.26 грн |
| 3+ | 669.59 грн |
| 5+ | 628.11 грн |
| 01016080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 996.41 грн |
| 3+ | 817.73 грн |
| 01016110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.1mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Tools features: spiral angle 35°
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 932.60 грн |
| 3+ | 765.25 грн |
| 01016130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: VAP
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 788.56 грн |
| 3+ | 650.97 грн |
| 5+ | 610.33 грн |
| 01016150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 788.56 грн |
| 3+ | 650.97 грн |
| 5+ | 610.33 грн |
| 01016170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 812.26 грн |
| 3+ | 669.59 грн |
| 5+ | 628.11 грн |
| 01016190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Tools application: for blind holes
Thread: M6
Plating material: VAP
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 812.26 грн |
| 3+ | 669.59 грн |
| 5+ | 628.11 грн |
| 01016210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 C; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M8
Plating material: VAP
Tools features: spiral angle 35°
Length: 90mm
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Thread pitch: 1.25
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 371 C; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M8
Plating material: VAP
Tools features: spiral angle 35°
Length: 90mm
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 920.74 грн |
| 3+ | 760.17 грн |
| 01016230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Tools features: spiral angle 35°
Length: 0.1m
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 C; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Kind of thread: metric; right hand thread
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M10
Plating material: VAP
Thread pitch: 1.5
Tools features: spiral angle 35°
Length: 0.1m
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 8mm
Conform to the norm: DIN 371 C; DIN 2184-1
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 1258.05 грн |
| 3+ | 1038.67 грн |
| 5+ | 979.41 грн |
| 01029130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01029230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Material: high speed steel cobalt HSS-E
Thread: M10
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 8mm
Working part length: 20mm
Length: 0.1m
Thread pitch: 1.5
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01030340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Tools application: to the through holes
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Length: 0.18m
Working part length: 42mm
Thread pitch: 3.5
Thread: M33
товару немає в наявності
В кошику
од. на суму грн.
| 01033210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01034250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
товару немає в наявності
В кошику
од. на суму грн.
| 01034300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 140mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M22
Thread pitch: 2.5
Working part length: 30mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M24
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 14.5mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Length: 160mm
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Working part length: 36mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 16mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M30
Thread pitch: 3.5
Working part length: 40mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M33
Thread pitch: 3.5
Working part length: 42mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Length: 0.18m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M33
Thread pitch: 3.5
Working part length: 42mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 20mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01034350 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Length: 0.2m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M36
Thread pitch: 4
Working part length: 50mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Length: 0.2m
Material: high speed steel cobalt HSS-E
Plating material: VAP
Tools application: to the through holes
Thread: M36
Thread pitch: 4
Working part length: 50mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01035170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Thread: M5
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Thread: M5
товару немає в наявності
В кошику
од. на суму грн.
| 01038300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M22
Thread pitch: 2.5
Length: 140mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 25mm
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M22
Thread pitch: 2.5
Length: 140mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 25mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M24
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Type of tool: tap
Thread: M24
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 14.5mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes
Type of tool: tap
Thread: M27
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 16mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; for blind holes
Type of tool: tap
Thread: M27
Thread pitch: 3
Length: 160mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 16mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 30mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Type of tool: tap
Thread: M30
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 18mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Type of tool: tap
Thread: M30
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 18mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Type of tool: tap
Thread: M33
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 20mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Type of tool: tap
Thread: M33
Thread pitch: 3.5
Length: 0.18m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 20mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 35mm
товару немає в наявності
В кошику
од. на суму грн.
| 01038350 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes
Type of tool: tap
Thread: M36
Thread pitch: 4
Length: 0.2m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 22mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 40mm
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes
Type of tool: tap
Thread: M36
Thread pitch: 4
Length: 0.2m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 22mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Working part length: 40mm
товару немає в наявності
В кошику
од. на суму грн.
| 01039130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: TiN
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Working part length: 5mm
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M3
Plating material: TiN
Thread pitch: 0.5
Tools features: spiral angle 35°
Length: 56mm
Working part length: 5mm
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01039150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M4
Plating material: TiN
Thread pitch: 0.7
Tools features: spiral angle 35°
Length: 63mm
Working part length: 7mm
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M4
Plating material: TiN
Thread pitch: 0.7
Tools features: spiral angle 35°
Length: 63mm
Working part length: 7mm
Holder socket size - mm: 3.4mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01039170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M5
Plating material: TiN
Thread pitch: 0.8
Tools features: spiral angle 35°
Length: 70mm
Working part length: 8mm
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M5
Plating material: TiN
Thread pitch: 0.8
Tools features: spiral angle 35°
Length: 70mm
Working part length: 8mm
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01039190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M6
Plating material: TiN
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Working part length: 10mm
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M6
Plating material: TiN
Thread pitch: 1
Tools features: spiral angle 35°
Length: 80mm
Working part length: 10mm
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01041150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Kind of holder: machine; square
Thread: M4
Kind of thread: metric; right hand thread
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 7mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Kind of holder: machine; square
Thread: M4
Kind of thread: metric; right hand thread
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 7mm
Length: 63mm
Thread pitch: 0.7
товару немає в наявності
В кошику
од. на суму грн.
| 01042270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Type of tool: tap
Thread: M16
Thread pitch: 2
Length: 0.11m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 9mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Plating material: VAP
Working part length: 20mm
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Type of tool: tap
Thread: M16
Thread pitch: 2
Length: 0.11m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 9mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Plating material: VAP
Working part length: 20mm
товару немає в наявності
В кошику
од. на суму грн.
| 01042330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M30
Plating material: VAP
Thread pitch: 3.5
Tools features: spiral angle 35°
Length: 0.18m
Working part length: 35mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread: M30
Plating material: VAP
Thread pitch: 3.5
Tools features: spiral angle 35°
Length: 0.18m
Working part length: 35mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 18mm
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01042340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of holder: machine; square
Thread: M33
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 20mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of holder: machine; square
Thread: M33
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 20mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
товару немає в наявності
В кошику
од. на суму грн.
| 01046260 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm
Conform to the norm: DIN 376; DIN 2184-1
Tools application: to the through holes
Thread: M14
Thread pitch: 2
Length: 0.11m
Working part length: 25mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm
Conform to the norm: DIN 376; DIN 2184-1
Tools application: to the through holes
Thread: M14
Thread pitch: 2
Length: 0.11m
Working part length: 25mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
товару немає в наявності
В кошику
од. на суму грн.
| 01046270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Conform to the norm: DIN 376; DIN 2184-1
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.11m
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Conform to the norm: DIN 376; DIN 2184-1
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.11m
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 01046320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm
Type of tool: tap
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Length: 160mm
Working part length: 36mm
Kind of holder: machine; square
Holder socket size - mm: 16mm
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm
Type of tool: tap
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Tools application: to the through holes
Thread: M27
Thread pitch: 3
Length: 160mm
Working part length: 36mm
Kind of holder: machine; square
Holder socket size - mm: 16mm
товару немає в наявності
В кошику
од. на суму грн.
| 01049130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Tools application: for blind holes
Thread: M3
Thread pitch: 0.5
Tools features: spiral angle 40°
Length: 56mm
Working part length: 5mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Tools application: for blind holes
Thread: M3
Thread pitch: 0.5
Tools features: spiral angle 40°
Length: 56mm
Working part length: 5mm
Kind of holder: machine; square
Type of tool: tap
Holder socket size - mm: 2.7mm
Conform to the norm: DIN 371; DIN 2184-1
Kind of thread: metric; right hand thread
Material: cobalt‑vanadium high‑speed steel HSSE‑V
товару немає в наявності
В кошику
од. на суму грн.