| Фото | Назва | Виробник | Інформація | Доступність | Ціна |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01004150 | GSR |
 Category: Threading Dies and TapsDescription: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Tools application: to the through holes Type of tool: tap Thread: M4 Holder socket size - mm: 3.4mm Working part length: 13mm Conform to the norm: DIN 371 B; DIN 2184-1 Length: 63mm Thread pitch: 0.7 Material: high speed steel cobalt HSS-E Kind of thread: metric; right hand thread Kind of holder: machine; square |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01004210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 22mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Conform to the norm: DIN 371 B; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Material: high speed steel cobalt HSS-E Thread: M4 Kind of thread: metric; right hand thread Plating material: VAP Holder socket size - mm: 3.4mm Working part length: 13mm Length: 63mm Thread pitch: 0.7 |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01005210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 B; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: to the through holes Working part length: 22mm Kind of thread: metric; right hand thread Plating material: VAP |
на замовлення 9 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Working part length: 9mm Kind of thread: metric; right hand thread Tools features: spiral angle 35° |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: M3 Length: 56mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 7mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 8mm |
на замовлення 7 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 10mm |
на замовлення 8 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Thread: M6 Length: 80mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 12mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Tools features: spiral angle 35° Working part length: 16mm Kind of thread: metric; right hand thread |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01015230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm Type of tool: tap Thread: M10 Length: 0.1m Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 8mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Working part length: 16mm |
на замовлення 10 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016080 | GSR |
Category: Threading Dies and Taps Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2 Length: 45mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.4 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 3 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016110 | GSR |
Category: Threading Dies and Taps Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP Type of tool: tap Thread: M2,5 Thread pitch: 0.45 Length: 50mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.1mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Plating material: VAP Kind of thread: metric; right hand thread Tools features: spiral angle 35° |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP Type of tool: tap Thread: M3 Length: 56mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 2.7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP Type of tool: tap Thread: M4 Length: 63mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 3.4mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.7 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
  |
01016170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP Type of tool: tap Thread: M5 Length: 70mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 0.8 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Type of tool: tap Thread: M6 Length: 80mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 4.9mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Type of tool: tap Thread: M8 Thread pitch: 1.25 Length: 90mm Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 6.2mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Tools features: spiral angle 35° Kind of thread: metric; right hand thread Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
 |
01016230 | GSR |
Category: Threading Dies and Taps Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP Type of tool: tap Thread: M10 Length: 0.1m Conform to the norm: DIN 371 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 8mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
||||||
| 01029130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm Working part length: 9mm Length: 56mm Thread pitch: 0.5 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 2.7mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm Working part length: 12mm Length: 63mm Thread pitch: 0.7 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M4 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 3.4mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm Working part length: 16mm Length: 70mm Thread pitch: 0.8 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M5 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01029190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm Working part length: 15mm Length: 80mm Thread pitch: 1 Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Thread: M6 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Holder socket size - mm: 4.9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01033210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Plating material: VAP Holder socket size - mm: 6.2mm Working part length: 18mm Length: 90mm Thread pitch: 1.25 Conform to the norm: DIN 371; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP Thread pitch: 1.75 Plating material: VAP Kind of thread: metric; right hand thread Thread: M12 Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Material: high speed steel cobalt HSS-E Type of tool: tap Tools application: to the through holes Holder socket size - mm: 7mm Working part length: 23mm Length: 0.11m |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034300 | GSR |
Category: Threading Dies and Taps Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M22 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 140mm Holder socket size - mm: 14.5mm Working part length: 30mm Thread pitch: 2.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M24 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 160mm Holder socket size - mm: 14.5mm Working part length: 36mm Thread pitch: 3 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034320 | GSR |
Category: Threading Dies and Taps Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M27 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 160mm Holder socket size - mm: 16mm Working part length: 36mm Thread pitch: 3 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M30 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 0.18m Holder socket size - mm: 18mm Working part length: 40mm Thread pitch: 3.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M33 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 0.18m Holder socket size - mm: 20mm Working part length: 42mm Thread pitch: 3.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01034350 | GSR |
Category: Threading Dies and Taps Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Plating material: VAP Material: high speed steel cobalt HSS-E Thread: M36 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Tools application: to the through holes Length: 0.2m Holder socket size - mm: 22mm Working part length: 50mm Thread pitch: 4 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038330 | GSR |
Category: Threading Dies and Taps Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm Material: high speed steel cobalt HSS-E Conform to the norm: DIN 376; DIN 2184-1 Tools application: for blind holes Thread: M30 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Holder socket size - mm: 18mm Working part length: 35mm Length: 0.18m Thread pitch: 3.5 Type of tool: tap |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01038350 | GSR |
Category: Threading Dies and Taps Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes Tools application: for blind holes Type of tool: tap Material: high speed steel cobalt HSS-E Thread: M36 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Holder socket size - mm: 22mm Length: 0.2m Working part length: 40mm Thread pitch: 4 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01039150 | GSR |
Category: Threading Dies and Taps Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN Material: high speed steel cobalt HSS-E Conform to the norm: DIN 371; DIN 2184-1 Tools application: for blind holes Type of tool: tap Thread: M4 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: TiN Holder socket size - mm: 3.4mm Working part length: 7mm Length: 63mm Thread pitch: 0.7 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01042270 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes Type of tool: tap Thread: M16 Thread pitch: 2 Length: 0.11m Conform to the norm: DIN 376; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 9mm Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Kind of thread: metric; right hand thread Tools application: for blind holes Plating material: VAP Working part length: 20mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01042340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP Conform to the norm: DIN 376; DIN 2184-1 Material: high speed steel cobalt HSS-E Tools application: for blind holes Kind of holder: machine; square Thread: M33 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Type of tool: tap Plating material: VAP Holder socket size - mm: 20mm Working part length: 35mm Length: 0.18m Thread pitch: 3.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01046260 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm Material: cobalt‑vanadium high‑speed steel HSSE‑V Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread Tools application: to the through holes Kind of holder: machine; square Thread: M14 Type of tool: tap Holder socket size - mm: 9mm Working part length: 25mm Length: 0.11m Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01050310 | GSR |
Category: Threading Dies and Taps Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm Working part length: 30mm Thread pitch: 3 Tools application: for blind holes Type of tool: tap Conform to the norm: DIN 376; DIN 2184-1 Thread: M24 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 40° Material: cobalt‑vanadium high‑speed steel HSSE‑V Holder socket size - mm: 14.5mm Length: 160mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01050340 | GSR |
Category: Threading Dies and Taps Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01051130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN Conform to the norm: DIN 371; DIN 2184-1 Tools application: for blind holes Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Plating material: TiCN Type of tool: tap Tools features: spiral angle 40° Holder socket size - mm: 2.7mm Working part length: 5mm Length: 56mm Thread pitch: 0.5 Material: cobalt‑vanadium high‑speed steel HSSE‑V |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01054270 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm Type of tool: tap Tools application: to the through holes Length: 0.11m Holder socket size - mm: 9mm Working part length: 25mm Thread pitch: 2 Material: high speed steel cobalt HSS-E Conform to the norm: DIN 376; DIN 2184-1 Thread: M16 Kind of holder: machine; square Kind of thread: metric; right hand thread |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01056250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm Tools application: for blind holes Material: high speed steel cobalt HSS-E Thread: M12 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 45° Type of tool: tap Holder socket size - mm: 7mm Working part length: 18mm Length: 0.11m Thread pitch: 1.75 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01056260 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes Material: high speed steel cobalt HSS-E Conform to the norm: DIN 376; DIN 2184-1 Kind of thread: metric; right hand thread Tools application: for blind holes Kind of holder: machine; square Thread: M14 Tools features: spiral angle 45° Type of tool: tap Holder socket size - mm: 9mm Working part length: 20mm Length: 0.11m Thread pitch: 2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01056270 | GSR |
Category: Threading Dies and Taps Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes Tools application: for blind holes Material: high speed steel cobalt HSS-E Thread: M16 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 45° Type of tool: tap Holder socket size - mm: 9mm Working part length: 20mm Length: 0.11m Thread pitch: 2 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01056280 | GSR |
Category: Threading Dies and Taps Description: Tap; M18; 2.5; L: 125mm; Holder: square,machine; 11mm Tools application: for blind holes Material: high speed steel cobalt HSS-E Thread: M18 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 45° Type of tool: tap Holder socket size - mm: 11mm Working part length: 25mm Length: 125mm Thread pitch: 2.5 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01056290 | GSR |
Category: Threading Dies and Taps Description: Tap; M20; 2.5; L: 140mm; Holder: square,machine; 12mm Tools application: for blind holes Material: high speed steel cobalt HSS-E Thread: M20 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 45° Type of tool: tap Holder socket size - mm: 12mm Working part length: 25mm Length: 140mm Thread pitch: 2.5 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01059130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN Tools application: for blind holes; to the through holes Kind of thread: metric; right hand thread Thread: M3 Kind of holder: machine; square Conform to the norm: DIN 371; DIN 2184-1 Material: high speed steel cobalt HSS-E Plating material: TiCN Type of tool: tap Holder socket size - mm: 2.7mm Working part length: 9mm Length: 56mm Thread pitch: 0.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01060260 | GSR |
Category: Threading Dies and Taps Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; Plating: TiCN Length: 0.11m Tools application: for blind holes; to the through holes Plating material: TiCN Material: high speed steel cobalt HSS-E Thread: M14 Kind of holder: machine; square Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 9mm Working part length: 25mm Thread pitch: 2 Conform to the norm: DIN 376; DIN 2184-1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01105190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; Plating: TiN Plating material: TiN Material: high speed steel cobalt HSS-E Conform to the norm: DIN 371 B; DIN 2184-1 Tools application: to the through holes Kind of holder: machine; square Thread: M6 Kind of thread: metric; right hand thread Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 19mm Length: 80mm Thread pitch: 1 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01107170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN Thread: M5 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 10mm Length: 70mm Thread pitch: 0.8 Plating material: TiN Material: high speed steel cobalt HSS-E Conform to the norm: DIN 371 C; DIN 2184-1 Tools application: for blind holes Kind of holder: machine; square |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01107190 | GSR |
Category: Threading Dies and Taps Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes Material: high speed steel cobalt HSS-E Conform to the norm: DIN 371 C; DIN 2184-1 Tools application: for blind holes Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Type of tool: tap Plating material: TiN Holder socket size - mm: 4.9mm Length: 80mm Working part length: 12mm Thread pitch: 1 Thread: M6 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01604040 | GSR |
Category: Threading Dies and Taps Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: UNC 4 Thread pitch: 40 Kind of thread: inch; right hand thread; UNC Tools application: to the through holes Conform to the norm: DIN 2184-2 B Kind of holder: machine; square Material: high speed steel cobalt HSS-E Holder socket size - mm: 2.7mm Working part length: 11mm Length: 56mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01615040 | GSR |
Category: Threading Dies and Taps Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm Type of tool: tap Thread: UNC 4 Thread pitch: 40 Kind of thread: inch; right hand thread; UNC Tools application: for blind holes Conform to the norm: DIN 2184-2 C Kind of holder: machine; square Material: high speed steel cobalt HSS-E Tools features: spiral angle 35° Holder socket size - mm: 2.7mm Working part length: 5mm Length: 56mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01615290 | GSR |
Category: Threading Dies and Taps Description: Tap; UNC 1 1/2"; 6; L: 200mm; Holder: square,machine; 24mm Kind of thread: inch; right hand thread; UNC Kind of holder: machine; square Tools features: spiral angle 35° Type of tool: tap Thread: UNC 1 1/2" Holder socket size - mm: 24mm Working part length: 45mm Length: 0.2m Thread pitch: 6 Material: high speed steel cobalt HSS-E Conform to the norm: DIN 2184-2 C Tools application: for blind holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 01900130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN Material: high speed steel cobalt HSS-E Tools application: for blind holes; to the through holes Conform to the norm: DIN 371 C; DIN 2184-1 Plating material: TiN Type of tool: tap Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Holder socket size - mm: 2.7mm Working part length: 11mm Length: 56mm Thread pitch: 0.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 02015130 | GSR |
Category: Threading Dies and Taps Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 0m; for blind holes Material: high speed steel cobalt HSS-E Conform to the norm: DIN 376 C; DIN 2184-1 Type of tool: tap Tools application: for blind holes Thread: M3 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Holder socket size - mm: 0m Working part length: 7mm Length: 56mm Thread pitch: 0.5 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 02015170 | GSR |
Category: Threading Dies and Taps Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 2.7mm Material: high speed steel cobalt HSS-E Type of tool: tap Holder socket size - mm: 2.7mm Working part length: 10mm Length: 70mm Thread: M5 Thread pitch: 0.8 Kind of holder: machine; square Tools application: for blind holes Kind of thread: metric; right hand thread Conform to the norm: DIN 376 C; DIN 2184-1 Tools features: spiral angle 35° |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
| 02015210 | GSR |
Category: Threading Dies and Taps Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 4.9mm Conform to the norm: DIN 376 C; DIN 2184-1 Tools application: for blind holes Material: high speed steel cobalt HSS-E Thread: M8 Kind of holder: machine; square Kind of thread: metric; right hand thread Tools features: spiral angle 35° Type of tool: tap Holder socket size - mm: 4.9mm Working part length: 16mm Length: 90mm Thread pitch: 1.25 |
товару немає в наявності |
В кошику од. на суму грн. | |||||||
 |
02016250 | GSR |
Category: Threading Dies and Taps Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP Type of tool: tap Thread: M12 Length: 0.11m Conform to the norm: DIN 376 C; DIN 2184-1 Kind of holder: machine; square Holder socket size - mm: 7mm Material: high speed steel cobalt HSS-E Tools application: for blind holes Thread pitch: 1.75 Kind of thread: metric; right hand thread Tools features: spiral angle 35° Plating material: VAP Working part length: 18mm |
на замовлення 5 шт: термін постачання 14-30 дні (днів) |
|
| 01004150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Tools application: to the through holes
Type of tool: tap
Thread: M4
Holder socket size - mm: 3.4mm
Working part length: 13mm
Conform to the norm: DIN 371 B; DIN 2184-1
Length: 63mm
Thread pitch: 0.7
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Tools application: to the through holes
Type of tool: tap
Thread: M4
Holder socket size - mm: 3.4mm
Working part length: 13mm
Conform to the norm: DIN 371 B; DIN 2184-1
Length: 63mm
Thread pitch: 0.7
Material: high speed steel cobalt HSS-E
Kind of thread: metric; right hand thread
Kind of holder: machine; square
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 2+ | 391.03 грн |
| 3+ | 323.60 грн |
| 5+ | 303.43 грн |
| 01004210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 557.59 грн |
| 3+ | 459.76 грн |
| 5+ | 432.03 грн |
| 01005150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of thread: metric; right hand thread
Plating material: VAP
Holder socket size - mm: 3.4mm
Working part length: 13mm
Length: 63mm
Thread pitch: 0.7
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 731.38 грн |
| 3+ | 603.49 грн |
| 5+ | 565.67 грн |
| 01005210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 B; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: to the through holes
Working part length: 22mm
Kind of thread: metric; right hand thread
Plating material: VAP
на замовлення 9 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 965.82 грн |
| 3+ | 797.65 грн |
| 5+ | 748.06 грн |
| 01015080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 494.22 грн |
| 3+ | 408.49 грн |
| 5+ | 383.28 грн |
| 01015110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Working part length: 9mm
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 466.16 грн |
| 3+ | 384.96 грн |
| 5+ | 360.58 грн |
| 01015130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 7mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 2+ | 420.00 грн |
| 3+ | 347.13 грн |
| 5+ | 325.28 грн |
| 01015150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 8mm
на замовлення 7 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 2+ | 402.80 грн |
| 3+ | 332.84 грн |
| 5+ | 311.83 грн |
| 01015170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 10mm
на замовлення 8 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 460.73 грн |
| 3+ | 379.91 грн |
| 5+ | 356.38 грн |
| 01015190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 12mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 460.73 грн |
| 3+ | 379.91 грн |
| 5+ | 356.38 грн |
| 01015210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Working part length: 16mm
Kind of thread: metric; right hand thread
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 574.78 грн |
| 3+ | 474.89 грн |
| 5+ | 445.47 грн |
| 01015230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Working part length: 16mm
на замовлення 10 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 806.51 грн |
| 3+ | 664.85 грн |
| 5+ | 623.66 грн |
| 01016080 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M2; 400m; L: 45mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2
Length: 45mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.4
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 3 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 989.35 грн |
| 3+ | 811.94 грн |
| 01016110 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M2,5; 450m; L: 50mm; Holder: square,machine; 2.1mm; Plating: VAP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Plating material: VAP
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 925.99 грн |
| 3+ | 759.83 грн |
| 5+ | 716.96 грн |
| 01016130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: VAP
Type of tool: tap
Thread: M3
Length: 56mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 2.7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 782.97 грн |
| 3+ | 646.36 грн |
| 5+ | 606.01 грн |
| 01016150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: VAP
Type of tool: tap
Thread: M4
Length: 63mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.7
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 782.97 грн |
| 3+ | 646.36 грн |
| 5+ | 606.01 грн |
| 01016170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: VAP
Type of tool: tap
Thread: M5
Length: 70mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 0.8
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 806.51 грн |
| 3+ | 664.85 грн |
| 5+ | 623.66 грн |
| 01016190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Type of tool: tap
Thread: M6
Length: 80mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 806.51 грн |
| 3+ | 664.85 грн |
| 5+ | 623.66 грн |
| 01016210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Type of tool: tap
Thread: M8
Thread pitch: 1.25
Length: 90mm
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 6.2mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 914.22 грн |
| 3+ | 754.78 грн |
| 5+ | 707.72 грн |
| 01016230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: square,machine; 8mm; Plating: VAP
Type of tool: tap
Thread: M10
Length: 0.1m
Conform to the norm: DIN 371 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 8mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 1249.14 грн |
| 3+ | 1031.31 грн |
| 5+ | 972.48 грн |
| 01029130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 2.7mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm
Working part length: 12mm
Length: 63mm
Thread pitch: 0.7
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 3.4mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm
Working part length: 16mm
Length: 70mm
Thread pitch: 0.8
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M5
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01029190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm
Working part length: 15mm
Length: 80mm
Thread pitch: 1
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Thread: M6
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 4.9mm
товару немає в наявності
В кошику
од. на суму грн.
| 01033210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 6.2mm; Plating: VAP
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Plating material: VAP
Holder socket size - mm: 6.2mm
Working part length: 18mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01034250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Thread pitch: 1.75
Plating material: VAP
Kind of thread: metric; right hand thread
Thread: M12
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 7mm
Working part length: 23mm
Length: 0.11m
товару немає в наявності
В кошику
од. на суму грн.
| 01034300 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M22
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 140mm
Holder socket size - mm: 14.5mm
Working part length: 30mm
Thread pitch: 2.5
Category: Threading Dies and Taps
Description: Tap; M22; 2.5; L: 140mm; Holder: square,machine; 14.5mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M22
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 140mm
Holder socket size - mm: 14.5mm
Working part length: 30mm
Thread pitch: 2.5
товару немає в наявності
В кошику
од. на суму грн.
| 01034310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M24
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 160mm
Holder socket size - mm: 14.5mm
Working part length: 36mm
Thread pitch: 3
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M24
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 160mm
Holder socket size - mm: 14.5mm
Working part length: 36mm
Thread pitch: 3
товару немає в наявності
В кошику
од. на суму грн.
| 01034320 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M27
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 160mm
Holder socket size - mm: 16mm
Working part length: 36mm
Thread pitch: 3
Category: Threading Dies and Taps
Description: Tap; M27; 3; L: 160mm; Holder: square,machine; 16mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M27
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 160mm
Holder socket size - mm: 16mm
Working part length: 36mm
Thread pitch: 3
товару немає в наявності
В кошику
од. на суму грн.
| 01034330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M30
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.18m
Holder socket size - mm: 18mm
Working part length: 40mm
Thread pitch: 3.5
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M30
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.18m
Holder socket size - mm: 18mm
Working part length: 40mm
Thread pitch: 3.5
товару немає в наявності
В кошику
од. на суму грн.
| 01034340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M33
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.18m
Holder socket size - mm: 20mm
Working part length: 42mm
Thread pitch: 3.5
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M33
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.18m
Holder socket size - mm: 20mm
Working part length: 42mm
Thread pitch: 3.5
товару немає в наявності
В кошику
од. на суму грн.
| 01034350 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M36
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.2m
Holder socket size - mm: 22mm
Working part length: 50mm
Thread pitch: 4
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Plating material: VAP
Material: high speed steel cobalt HSS-E
Thread: M36
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Tools application: to the through holes
Length: 0.2m
Holder socket size - mm: 22mm
Working part length: 50mm
Thread pitch: 4
товару немає в наявності
В кошику
од. на суму грн.
| 01038330 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Tools application: for blind holes
Thread: M30
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 18mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
Type of tool: tap
Category: Threading Dies and Taps
Description: Tap; M30; 3.5; L: 180mm; Holder: square,machine; 18mm
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Tools application: for blind holes
Thread: M30
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 18mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
Type of tool: tap
товару немає в наявності
В кошику
од. на суму грн.
| 01038350 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes
Tools application: for blind holes
Type of tool: tap
Material: high speed steel cobalt HSS-E
Thread: M36
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 22mm
Length: 0.2m
Working part length: 40mm
Thread pitch: 4
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M36; 4; L: 200mm; Holder: square,machine; 22mm; for blind holes
Tools application: for blind holes
Type of tool: tap
Material: high speed steel cobalt HSS-E
Thread: M36
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 22mm
Length: 0.2m
Working part length: 40mm
Thread pitch: 4
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01039150 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Type of tool: tap
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: TiN
Holder socket size - mm: 3.4mm
Working part length: 7mm
Length: 63mm
Thread pitch: 0.7
Category: Threading Dies and Taps
Description: Tap; M4; 700m; L: 63mm; Holder: square,machine; 3.4mm; Plating: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Type of tool: tap
Thread: M4
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: TiN
Holder socket size - mm: 3.4mm
Working part length: 7mm
Length: 63mm
Thread pitch: 0.7
товару немає в наявності
В кошику
од. на суму грн.
| 01042270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Type of tool: tap
Thread: M16
Thread pitch: 2
Length: 0.11m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 9mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Plating material: VAP
Working part length: 20mm
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Type of tool: tap
Thread: M16
Thread pitch: 2
Length: 0.11m
Conform to the norm: DIN 376; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 9mm
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Kind of thread: metric; right hand thread
Tools application: for blind holes
Plating material: VAP
Working part length: 20mm
товару немає в наявності
В кошику
од. на суму грн.
| 01042340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of holder: machine; square
Thread: M33
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 20mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm; Plating: VAP
Conform to the norm: DIN 376; DIN 2184-1
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Kind of holder: machine; square
Thread: M33
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: VAP
Holder socket size - mm: 20mm
Working part length: 35mm
Length: 0.18m
Thread pitch: 3.5
товару немає в наявності
В кошику
од. на суму грн.
| 01046260 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: to the through holes
Kind of holder: machine; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 25mm
Length: 0.11m
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: to the through holes
Kind of holder: machine; square
Thread: M14
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 25mm
Length: 0.11m
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 01050310 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Working part length: 30mm
Thread pitch: 3
Tools application: for blind holes
Type of tool: tap
Conform to the norm: DIN 376; DIN 2184-1
Thread: M24
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 40°
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Holder socket size - mm: 14.5mm
Length: 160mm
Category: Threading Dies and Taps
Description: Tap; M24; 3; L: 160mm; Holder: square,machine; 14.5mm
Working part length: 30mm
Thread pitch: 3
Tools application: for blind holes
Type of tool: tap
Conform to the norm: DIN 376; DIN 2184-1
Thread: M24
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 40°
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Holder socket size - mm: 14.5mm
Length: 160mm
товару немає в наявності
В кошику
од. на суму грн.
| 01050340 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
Category: Threading Dies and Taps
Description: Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm
товару немає в наявності
В кошику
од. на суму грн.
| 01051130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Plating material: TiCN
Type of tool: tap
Tools features: spiral angle 40°
Holder socket size - mm: 2.7mm
Working part length: 5mm
Length: 56mm
Thread pitch: 0.5
Material: cobalt‑vanadium high‑speed steel HSSE‑V
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN
Conform to the norm: DIN 371; DIN 2184-1
Tools application: for blind holes
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Plating material: TiCN
Type of tool: tap
Tools features: spiral angle 40°
Holder socket size - mm: 2.7mm
Working part length: 5mm
Length: 56mm
Thread pitch: 0.5
Material: cobalt‑vanadium high‑speed steel HSSE‑V
товару немає в наявності
В кошику
од. на суму грн.
| 01054270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm
Type of tool: tap
Tools application: to the through holes
Length: 0.11m
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm
Type of tool: tap
Tools application: to the through holes
Length: 0.11m
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
товару немає в наявності
В кошику
од. на суму грн.
| 01056250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M12
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 7mm
Working part length: 18mm
Length: 0.11m
Thread pitch: 1.75
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M12
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 7mm
Working part length: 18mm
Length: 0.11m
Thread pitch: 1.75
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01056260 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Kind of holder: machine; square
Thread: M14
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 20mm
Length: 0.11m
Thread pitch: 2
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376; DIN 2184-1
Kind of thread: metric; right hand thread
Tools application: for blind holes
Kind of holder: machine; square
Thread: M14
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 20mm
Length: 0.11m
Thread pitch: 2
товару немає в наявності
В кошику
од. на суму грн.
| 01056270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 20mm
Length: 0.11m
Thread pitch: 2
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M16; 2; L: 110mm; Holder: square,machine; 9mm; for blind holes
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M16
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 20mm
Length: 0.11m
Thread pitch: 2
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01056280 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M18; 2.5; L: 125mm; Holder: square,machine; 11mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M18
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 11mm
Working part length: 25mm
Length: 125mm
Thread pitch: 2.5
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M18; 2.5; L: 125mm; Holder: square,machine; 11mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M18
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 11mm
Working part length: 25mm
Length: 125mm
Thread pitch: 2.5
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01056290 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 140mm; Holder: square,machine; 12mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M20
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 12mm
Working part length: 25mm
Length: 140mm
Thread pitch: 2.5
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M20; 2.5; L: 140mm; Holder: square,machine; 12mm
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M20
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 45°
Type of tool: tap
Holder socket size - mm: 12mm
Working part length: 25mm
Length: 140mm
Thread pitch: 2.5
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01059130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN
Tools application: for blind holes; to the through holes
Kind of thread: metric; right hand thread
Thread: M3
Kind of holder: machine; square
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Plating material: TiCN
Type of tool: tap
Holder socket size - mm: 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiCN
Tools application: for blind holes; to the through holes
Kind of thread: metric; right hand thread
Thread: M3
Kind of holder: machine; square
Conform to the norm: DIN 371; DIN 2184-1
Material: high speed steel cobalt HSS-E
Plating material: TiCN
Type of tool: tap
Holder socket size - mm: 2.7mm
Working part length: 9mm
Length: 56mm
Thread pitch: 0.5
товару немає в наявності
В кошику
од. на суму грн.
| 01060260 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; Plating: TiCN
Length: 0.11m
Tools application: for blind holes; to the through holes
Plating material: TiCN
Material: high speed steel cobalt HSS-E
Thread: M14
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
Conform to the norm: DIN 376; DIN 2184-1
Category: Threading Dies and Taps
Description: Tap; M14; 2; L: 110mm; Holder: square,machine; 9mm; Plating: TiCN
Length: 0.11m
Tools application: for blind holes; to the through holes
Plating material: TiCN
Material: high speed steel cobalt HSS-E
Thread: M14
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 9mm
Working part length: 25mm
Thread pitch: 2
Conform to the norm: DIN 376; DIN 2184-1
товару немає в наявності
В кошику
од. на суму грн.
| 01105190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; Plating: TiN
Plating material: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Thread: M6
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 80mm
Thread pitch: 1
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; Plating: TiN
Plating material: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 B; DIN 2184-1
Tools application: to the through holes
Kind of holder: machine; square
Thread: M6
Kind of thread: metric; right hand thread
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 19mm
Length: 80mm
Thread pitch: 1
товару немає в наявності
В кошику
од. на суму грн.
| 01107170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN
Thread: M5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 10mm
Length: 70mm
Thread pitch: 0.8
Plating material: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Kind of holder: machine; square
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 4.9mm; Plating: TiN
Thread: M5
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 10mm
Length: 70mm
Thread pitch: 0.8
Plating material: TiN
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Kind of holder: machine; square
товару немає в наявності
В кошику
од. на суму грн.
| 01107190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: TiN
Holder socket size - mm: 4.9mm
Length: 80mm
Working part length: 12mm
Thread pitch: 1
Thread: M6
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: square,machine; 4.9mm; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 371 C; DIN 2184-1
Tools application: for blind holes
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Plating material: TiN
Holder socket size - mm: 4.9mm
Length: 80mm
Working part length: 12mm
Thread pitch: 1
Thread: M6
товару немає в наявності
В кошику
од. на суму грн.
| 01604040 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: UNC 4
Thread pitch: 40
Kind of thread: inch; right hand thread; UNC
Tools application: to the through holes
Conform to the norm: DIN 2184-2 B
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Holder socket size - mm: 2.7mm
Working part length: 11mm
Length: 56mm
Category: Threading Dies and Taps
Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: UNC 4
Thread pitch: 40
Kind of thread: inch; right hand thread; UNC
Tools application: to the through holes
Conform to the norm: DIN 2184-2 B
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Holder socket size - mm: 2.7mm
Working part length: 11mm
Length: 56mm
товару немає в наявності
В кошику
од. на суму грн.
| 01615040 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: UNC 4
Thread pitch: 40
Kind of thread: inch; right hand thread; UNC
Tools application: for blind holes
Conform to the norm: DIN 2184-2 C
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Holder socket size - mm: 2.7mm
Working part length: 5mm
Length: 56mm
Category: Threading Dies and Taps
Description: Tap; UNC 4; 40; L: 56mm; Holder: square,machine; 2.7mm
Type of tool: tap
Thread: UNC 4
Thread pitch: 40
Kind of thread: inch; right hand thread; UNC
Tools application: for blind holes
Conform to the norm: DIN 2184-2 C
Kind of holder: machine; square
Material: high speed steel cobalt HSS-E
Tools features: spiral angle 35°
Holder socket size - mm: 2.7mm
Working part length: 5mm
Length: 56mm
товару немає в наявності
В кошику
од. на суму грн.
| 01615290 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNC 1 1/2"; 6; L: 200mm; Holder: square,machine; 24mm
Kind of thread: inch; right hand thread; UNC
Kind of holder: machine; square
Tools features: spiral angle 35°
Type of tool: tap
Thread: UNC 1 1/2"
Holder socket size - mm: 24mm
Working part length: 45mm
Length: 0.2m
Thread pitch: 6
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 2184-2 C
Tools application: for blind holes
Category: Threading Dies and Taps
Description: Tap; UNC 1 1/2"; 6; L: 200mm; Holder: square,machine; 24mm
Kind of thread: inch; right hand thread; UNC
Kind of holder: machine; square
Tools features: spiral angle 35°
Type of tool: tap
Thread: UNC 1 1/2"
Holder socket size - mm: 24mm
Working part length: 45mm
Length: 0.2m
Thread pitch: 6
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 2184-2 C
Tools application: for blind holes
товару немає в наявності
В кошику
од. на суму грн.
| 01900130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN
Material: high speed steel cobalt HSS-E
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 371 C; DIN 2184-1
Plating material: TiN
Type of tool: tap
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Holder socket size - mm: 2.7mm
Working part length: 11mm
Length: 56mm
Thread pitch: 0.5
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 2.7mm; Plating: TiN
Material: high speed steel cobalt HSS-E
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 371 C; DIN 2184-1
Plating material: TiN
Type of tool: tap
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Holder socket size - mm: 2.7mm
Working part length: 11mm
Length: 56mm
Thread pitch: 0.5
товару немає в наявності
В кошику
од. на суму грн.
| 02015130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 0m; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376 C; DIN 2184-1
Type of tool: tap
Tools application: for blind holes
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 0m
Working part length: 7mm
Length: 56mm
Thread pitch: 0.5
Category: Threading Dies and Taps
Description: Tap; M3; 500m; L: 56mm; Holder: square,machine; 0m; for blind holes
Material: high speed steel cobalt HSS-E
Conform to the norm: DIN 376 C; DIN 2184-1
Type of tool: tap
Tools application: for blind holes
Thread: M3
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Holder socket size - mm: 0m
Working part length: 7mm
Length: 56mm
Thread pitch: 0.5
товару немає в наявності
В кошику
од. на суму грн.
| 02015170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 2.7mm
Working part length: 10mm
Length: 70mm
Thread: M5
Thread pitch: 0.8
Kind of holder: machine; square
Tools application: for blind holes
Kind of thread: metric; right hand thread
Conform to the norm: DIN 376 C; DIN 2184-1
Tools features: spiral angle 35°
Category: Threading Dies and Taps
Description: Tap; M5; 800m; L: 70mm; Holder: square,machine; 2.7mm
Material: high speed steel cobalt HSS-E
Type of tool: tap
Holder socket size - mm: 2.7mm
Working part length: 10mm
Length: 70mm
Thread: M5
Thread pitch: 0.8
Kind of holder: machine; square
Tools application: for blind holes
Kind of thread: metric; right hand thread
Conform to the norm: DIN 376 C; DIN 2184-1
Tools features: spiral angle 35°
товару немає в наявності
В кошику
од. на суму грн.
| 02015210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 376 C; DIN 2184-1
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 90mm
Thread pitch: 1.25
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: square,machine; 4.9mm
Conform to the norm: DIN 376 C; DIN 2184-1
Tools application: for blind holes
Material: high speed steel cobalt HSS-E
Thread: M8
Kind of holder: machine; square
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Type of tool: tap
Holder socket size - mm: 4.9mm
Working part length: 16mm
Length: 90mm
Thread pitch: 1.25
товару немає в наявності
В кошику
од. на суму грн.
| 02016250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Type of tool: tap
Thread: M12
Length: 0.11m
Conform to the norm: DIN 376 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.75
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Working part length: 18mm
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: square,machine; 7mm; Plating: VAP
Type of tool: tap
Thread: M12
Length: 0.11m
Conform to the norm: DIN 376 C; DIN 2184-1
Kind of holder: machine; square
Holder socket size - mm: 7mm
Material: high speed steel cobalt HSS-E
Tools application: for blind holes
Thread pitch: 1.75
Kind of thread: metric; right hand thread
Tools features: spiral angle 35°
Plating material: VAP
Working part length: 18mm
на замовлення 5 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна |
|---|---|
| 1+ | 1593.10 грн |
| 3+ | 1315.41 грн |
| 5+ | 1233.04 грн |