| Фото | Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||
|---|---|---|---|---|---|---|---|---|---|
| 00166061 | GSR |
 Category: Threading Dies and TapsDescription: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; initial Type of tool: tap Thread: UN 9/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 11mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Version: initial Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166063 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; finishing Type of tool: tap Thread: UN 9/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 11mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Version: finishing Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166191 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; initial Tools application: for blind holes; to the through holes Thread: UN 1 3/4" Version: initial Thread pitch: 12 Length: 125mm Working part length: 40mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 29mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166193 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; finishing Tools application: for blind holes; to the through holes Thread: UN 1 3/4" Version: finishing Thread pitch: 12 Length: 125mm Working part length: 40mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 29mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166203 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 1 3/4"; 8; L: 125mm; Holder: square,hand; 29mm; finishing Thread: UN 1 3/4" Holder socket size - mm: 29mm Working part length: 40mm Length: 125mm Thread pitch: 8 Conform to the norm: DIN 2184-2 Type of tool: tap Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166221 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; initial Type of tool: tap Kind of holder: hand; square Tools application: for blind holes; to the through holes Conform to the norm: DIN 2184-2 Version: initial Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Thread: UN 1 7/8" Length: 140mm Holder socket size - mm: 29mm Working part length: 40mm Thread pitch: 8 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166223 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; finishing Type of tool: tap Kind of holder: hand; square Tools application: for blind holes; to the through holes Conform to the norm: DIN 2184-2 Version: finishing Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Thread: UN 1 7/8" Length: 140mm Holder socket size - mm: 29mm Working part length: 40mm Thread pitch: 8 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166231 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; initial Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UN 2" Version: initial Thread pitch: 12 Length: 140mm Working part length: 40mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 32mm Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166233 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; finishing Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UN 2" Version: finishing Thread pitch: 12 Length: 140mm Working part length: 40mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 32mm Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166241 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; initial Kind of thread: inch; right hand thread; UN Thread: UN 2" Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 32mm Working part length: 40mm Length: 140mm Thread pitch: 8 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166243 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; finishing Kind of thread: inch; right hand thread; UN Thread: UN 2" Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 32mm Working part length: 40mm Length: 140mm Thread pitch: 8 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166261 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Thread: UN 2 1/2" Version: initial Thread pitch: 8 Length: 0.18m Working part length: 56mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 39mm Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00166263 | GSR |
Category: Threading Dies and Taps Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; finishing Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Thread: UN 2 1/2" Version: finishing Thread pitch: 8 Length: 0.18m Working part length: 56mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 39mm Kind of thread: inch; right hand thread; UN Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167090 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNS 1"; 14; L: 90mm; Holder: square,hand; 14.5mm; 2pcs. Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Thread: UNS 1" Type of tool: tap - set Holder socket size - mm: 14.5mm Length: 90mm Working part length: 22mm Quantity in set/package: 2pcs. Thread pitch: 14 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167100 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs. Type of tool: tap - set Thread: UN 1 1/16" Thread pitch: 12 Length: 90mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 16mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167130 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 1 1/4"; 8; L: 125mm; Holder: square,hand; 18mm; 2pcs. Kind of thread: inch; right hand thread; UN Conform to the norm: DIN 2184-2 Holder socket size - mm: 18mm Working part length: 45mm Length: 125mm Quantity in set/package: 2pcs. Kind of holder: hand; square Thread pitch: 8 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Type of tool: tap - set Thread: UN 1 1/4" |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167190 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; 2pcs. Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Kind of holder: hand; square Kind of thread: inch; right hand thread; UN Type of tool: tap - set Holder socket size - mm: 29mm Length: 125mm Working part length: 40mm Thread pitch: 12 Quantity in set/package: 2pcs. Thread: UN 1 3/4" |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167220 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs. Type of tool: tap - set Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UN 1 7/8" Thread pitch: 8 Length: 140mm Working part length: 40mm Kind of holder: hand; square Holder socket size - mm: 29mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UN Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167250 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 2 1/4"; 8; L: 160mm; Holder: square,hand; 35mm; 2pcs. Type of tool: tap - set Thread: UN 2 1/4" Thread pitch: 8 Length: 160mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 35mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 40mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00167270 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; 2pcs. Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UN Tools application: for blind holes; to the through holes Type of tool: tap - set Kind of holder: hand; square Thread: UN 2 3/4" Length: 0.2m Holder socket size - mm: 39mm Working part length: 56mm Thread pitch: 8 Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174001 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Type of tool: tap Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 0 Holder socket size - mm: 2.1mm Working part length: 8mm Length: 32mm Thread pitch: 80 Material: high speed steel grounded HSS-G Version: initial |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174003 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing Conform to the norm: DIN 2184-2 Tools application: for blind holes; to the through holes Type of tool: tap Kind of holder: hand; square Kind of thread: inch; right hand thread; UNF Thread: UNF 0 Holder socket size - mm: 2.1mm Working part length: 8mm Length: 32mm Thread pitch: 80 Material: high speed steel grounded HSS-G Version: finishing |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174033 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing Type of tool: tap Thread: UNF 3 Thread pitch: 56 Length: 40mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 2.1mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: finishing Working part length: 9mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174101 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial Type of tool: tap Thread: UNF 10 Thread pitch: 32 Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: initial Length: 50mm Working part length: 16mm Kind of holder: hand; square Holder socket size - mm: 4.9mm Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174103 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing Type of tool: tap Thread: UNF 10 Thread pitch: 32 Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Version: finishing Length: 50mm Working part length: 16mm Kind of holder: hand; square Holder socket size - mm: 4.9mm Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174123 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; finishing Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Type of tool: tap Thread: UNF 12 Holder socket size - mm: 4.9mm Working part length: 17mm Length: 56mm Thread pitch: 28 Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||
 |
00174161 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial Type of tool: tap Thread: UNF 7/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 6.2mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: initial Working part length: 24mm |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||
 |
00174163 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing Type of tool: tap Thread: UNF 7/16" Thread pitch: 20 Length: 70mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 6.2mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: finishing Working part length: 24mm |
на замовлення 4 шт: термін постачання 14-30 дні (днів) |
|
||||
| 00174181 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; initial Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 9/16" Version: initial Thread pitch: 18 Length: 70mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 9mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174191 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; initial Length: 70mm Tools application: for blind holes; to the through holes Thread: UNF 5/8" Version: initial Thread pitch: 18 Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 9mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174193 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; finishing Length: 70mm Thread: UNF 5/8" Version: finishing Thread pitch: 18 Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 9mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174211 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial Type of tool: tap Thread: UNF 3/4" Thread pitch: 16 Length: 80mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 11mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: initial Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174233 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm Type of tool: tap Thread: UNF 7/8-14" Thread pitch: 14 Length: 80mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 14.5mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNF Tools application: for blind holes; to the through holes Version: finishing Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174271 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; initial Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 1 1/8" Version: initial Thread pitch: 12 Length: 90mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174273 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; finishing Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 1 1/8" Version: finishing Thread pitch: 12 Length: 90mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174281 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; initial Version: initial Length: 90mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 1 1/4" Thread pitch: 12 Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00174283 | GSR |
Category: Threading Dies and Taps Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; finishing Version: finishing Length: 90mm Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 1 1/4" Thread pitch: 12 Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 22mm Conform to the norm: DIN 2184-2 Kind of thread: inch; right hand thread; UNF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175000 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs. Tools application: for blind holes; to the through holes Length: 32mm Material: high speed steel grounded HSS-G Working part length: 8mm Conform to the norm: DIN 2184-2 Thread: UNF 0 Thread pitch: 80 Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 2.5mm Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175050 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 5; 44; L: 40mm; Holder: square,hand; 3.5mm; 2pcs. Tools application: for blind holes; to the through holes Thread: UNF 5 Thread pitch: 44 Length: 40mm Working part length: 11mm Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 3.5mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175120 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 12; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs. Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 12 Thread pitch: 28 Length: 56mm Working part length: 17mm Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 6mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175130 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 1/4"; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs. Tools application: for blind holes; to the through holes Kind of thread: fine thread; inch; right hand thread; UNF Kind of holder: hand; square Type of tool: tap - set Thread: UNF 1/4" Holder socket size - mm: 6mm Working part length: 19mm Length: 56mm Quantity in set/package: 2pcs. Thread pitch: 28 Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175160 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; 2pcs. Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 7/16" Thread pitch: 20 Length: 70mm Working part length: 24mm Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 6.2mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175170 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; 2pcs. Tools application: for blind holes; to the through holes Thread: UNF 1/2" Thread pitch: 20 Length: 70mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 7mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175210 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs. Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNF 3/4" Thread pitch: 16 Length: 80mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap - set Holder socket size - mm: 11mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNF Quantity in set/package: 2pcs. |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175230 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs. Type of tool: tap - set Thread: UNF 7/8" Thread pitch: 14 Length: 80mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 14.5mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; inch; right hand thread; UNF Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00175280 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 18mm; 2pcs. Type of tool: tap - set Thread: UNF 1 1/4" Thread pitch: 12 Length: 90mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 18mm Material: high speed steel grounded HSS-G Kind of thread: fine thread; inch; right hand thread; UNF Tools application: for blind holes; to the through holes Quantity in set/package: 2pcs. Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176051 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; initial Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Type of tool: tap Thread: UNEF 7/16" Holder socket size - mm: 6.2mm Working part length: 20mm Length: 63mm Thread pitch: 28 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176053 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; finishing Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Type of tool: tap Thread: UNEF 7/16" Holder socket size - mm: 6.2mm Working part length: 20mm Length: 63mm Thread pitch: 28 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176081 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; initial Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNEF 5/8" Version: initial Thread pitch: 24 Length: 70mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 9mm Kind of thread: inch; right hand thread; UNEF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176083 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; finishing Conform to the norm: DIN 2184-2 Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNEF 5/8" Version: finishing Thread pitch: 24 Length: 70mm Working part length: 22mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 9mm Kind of thread: inch; right hand thread; UNEF |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176171 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; initial Kind of thread: inch; right hand thread; UNEF Thread: UNEF 1 3/16" Type of tool: tap Holder socket size - mm: 18mm Working part length: 22mm Length: 90mm Thread pitch: 18 Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176173 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; finishing Type of tool: tap Thread: UNEF 1 3/16" Thread pitch: 18 Length: 90mm Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 18mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Version: finishing Working part length: 22mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176221 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial Type of tool: tap Thread: UNEF 1 1/2" Thread pitch: 18 Length: 0.1m Conform to the norm: DIN 2184-2 Kind of holder: hand; square Holder socket size - mm: 22mm Material: high speed steel grounded HSS-G Kind of thread: inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Version: initial Working part length: 25mm |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176231 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm; initial Kind of thread: inch; right hand thread; UNEF Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNEF 1 9/16" Version: initial Thread pitch: 18 Length: 0.1m Working part length: 25mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 24mm Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176233 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm Kind of thread: inch; right hand thread; UNEF Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNEF 1 9/16" Version: finishing Thread pitch: 18 Length: 0.1m Working part length: 25mm Kind of holder: hand; square Type of tool: tap Holder socket size - mm: 24mm Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176241 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial Kind of thread: inch; right hand thread; UNEF Thread: UNEF 1 5/8" Conform to the norm: DIN 2184-2 Version: initial Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 24mm Working part length: 25mm Length: 0.1m Thread pitch: 18 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00176243 | GSR |
Category: Threading Dies and Taps Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing Kind of thread: inch; right hand thread; UNEF Thread: UNEF 1 5/8" Conform to the norm: DIN 2184-2 Version: finishing Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Type of tool: tap Holder socket size - mm: 24mm Working part length: 25mm Length: 0.1m Thread pitch: 18 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00177020 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNEF 1/4"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs. Holder socket size - mm: 4.9mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNEF Quantity in set/package: 2pcs. Material: high speed steel grounded HSS-G Tools application: for blind holes; to the through holes Thread: UNEF 1/4" Thread pitch: 32 Length: 56mm Working part length: 14mm Kind of holder: hand; square Type of tool: tap - set |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00177030 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNEF 5/16"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs. Quantity in set/package: 2pcs. Kind of thread: fine thread; inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Kind of holder: hand; square Thread: UNEF 5/16" Type of tool: tap - set Holder socket size - mm: 4.9mm Working part length: 18mm Length: 56mm Thread pitch: 32 Material: high speed steel grounded HSS-G Conform to the norm: DIN 2184-2 |
товару немає в наявності |
В кошику од. на суму грн. | |||||
| 00177040 | GSR |
Category: Threading Dies and Taps Description: Tap-set; UNEF 3/8"; 32; L: 63mm; Holder: square,hand; 5.5mm; 2pcs. Type of tool: tap - set Length: 63mm Conform to the norm: DIN 2184-2 Kind of thread: fine thread; inch; right hand thread; UNEF Tools application: for blind holes; to the through holes Kind of holder: hand; square Material: high speed steel grounded HSS-G Thread: UNEF 3/8" Holder socket size - mm: 5.5mm Working part length: 20mm Quantity in set/package: 2pcs. Thread pitch: 32 |
товару немає в наявності |
В кошику од. на суму грн. |
| 00166061 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00166063 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; finishing
Type of tool: tap
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UN 9/16"; 20; L: 70mm; Holder: square,hand; 11mm; finishing
Type of tool: tap
Thread: UN 9/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00166191 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; initial
Tools application: for blind holes; to the through holes
Thread: UN 1 3/4"
Version: initial
Thread pitch: 12
Length: 125mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; initial
Tools application: for blind holes; to the through holes
Thread: UN 1 3/4"
Version: initial
Thread pitch: 12
Length: 125mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00166193 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; finishing
Tools application: for blind holes; to the through holes
Thread: UN 1 3/4"
Version: finishing
Thread pitch: 12
Length: 125mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; finishing
Tools application: for blind holes; to the through holes
Thread: UN 1 3/4"
Version: finishing
Thread pitch: 12
Length: 125mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00166203 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 8; L: 125mm; Holder: square,hand; 29mm; finishing
Thread: UN 1 3/4"
Holder socket size - mm: 29mm
Working part length: 40mm
Length: 125mm
Thread pitch: 8
Conform to the norm: DIN 2184-2
Type of tool: tap
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Category: Threading Dies and Taps
Description: Tap; UN 1 3/4"; 8; L: 125mm; Holder: square,hand; 29mm; finishing
Thread: UN 1 3/4"
Holder socket size - mm: 29mm
Working part length: 40mm
Length: 125mm
Thread pitch: 8
Conform to the norm: DIN 2184-2
Type of tool: tap
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
товару немає в наявності
В кошику
од. на суму грн.
| 00166221 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; initial
Type of tool: tap
Kind of holder: hand; square
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Version: initial
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Length: 140mm
Holder socket size - mm: 29mm
Working part length: 40mm
Thread pitch: 8
Category: Threading Dies and Taps
Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; initial
Type of tool: tap
Kind of holder: hand; square
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Version: initial
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Length: 140mm
Holder socket size - mm: 29mm
Working part length: 40mm
Thread pitch: 8
товару немає в наявності
В кошику
од. на суму грн.
| 00166223 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; finishing
Type of tool: tap
Kind of holder: hand; square
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Version: finishing
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Length: 140mm
Holder socket size - mm: 29mm
Working part length: 40mm
Thread pitch: 8
Category: Threading Dies and Taps
Description: Tap; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; finishing
Type of tool: tap
Kind of holder: hand; square
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2184-2
Version: finishing
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UN 1 7/8"
Length: 140mm
Holder socket size - mm: 29mm
Working part length: 40mm
Thread pitch: 8
товару немає в наявності
В кошику
од. на суму грн.
| 00166231 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; initial
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 2"
Version: initial
Thread pitch: 12
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 32mm
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; initial
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 2"
Version: initial
Thread pitch: 12
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 32mm
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00166233 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; finishing
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 2"
Version: finishing
Thread pitch: 12
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 32mm
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UN 2"; 12; L: 140mm; Holder: square,hand; 32mm; finishing
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 2"
Version: finishing
Thread pitch: 12
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 32mm
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00166241 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; initial
Kind of thread: inch; right hand thread; UN
Thread: UN 2"
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 40mm
Length: 140mm
Thread pitch: 8
Category: Threading Dies and Taps
Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; initial
Kind of thread: inch; right hand thread; UN
Thread: UN 2"
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 40mm
Length: 140mm
Thread pitch: 8
товару немає в наявності
В кошику
од. на суму грн.
| 00166243 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; finishing
Kind of thread: inch; right hand thread; UN
Thread: UN 2"
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 40mm
Length: 140mm
Thread pitch: 8
Category: Threading Dies and Taps
Description: Tap; UN 2"; 8; L: 140mm; Holder: square,hand; 32mm; finishing
Kind of thread: inch; right hand thread; UN
Thread: UN 2"
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 32mm
Working part length: 40mm
Length: 140mm
Thread pitch: 8
товару немає в наявності
В кошику
од. на суму грн.
| 00166261 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Thread: UN 2 1/2"
Version: initial
Thread pitch: 8
Length: 0.18m
Working part length: 56mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 39mm
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Thread: UN 2 1/2"
Version: initial
Thread pitch: 8
Length: 0.18m
Working part length: 56mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 39mm
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00166263 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; finishing
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Thread: UN 2 1/2"
Version: finishing
Thread pitch: 8
Length: 0.18m
Working part length: 56mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 39mm
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UN 2 1/2"; 8; L: 180mm; Holder: square,hand; 39mm; finishing
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Thread: UN 2 1/2"
Version: finishing
Thread pitch: 8
Length: 0.18m
Working part length: 56mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 39mm
Kind of thread: inch; right hand thread; UN
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00167090 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNS 1"; 14; L: 90mm; Holder: square,hand; 14.5mm; 2pcs.
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UNS 1"
Type of tool: tap - set
Holder socket size - mm: 14.5mm
Length: 90mm
Working part length: 22mm
Quantity in set/package: 2pcs.
Thread pitch: 14
Category: Threading Dies and Taps
Description: Tap-set; UNS 1"; 14; L: 90mm; Holder: square,hand; 14.5mm; 2pcs.
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Thread: UNS 1"
Type of tool: tap - set
Holder socket size - mm: 14.5mm
Length: 90mm
Working part length: 22mm
Quantity in set/package: 2pcs.
Thread pitch: 14
товару немає в наявності
В кошику
од. на суму грн.
| 00167100 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs.
Type of tool: tap - set
Thread: UN 1 1/16"
Thread pitch: 12
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 16mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/16"; 12; L: 90mm; Holder: square,hand; 16mm; 2pcs.
Type of tool: tap - set
Thread: UN 1 1/16"
Thread pitch: 12
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 16mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00167130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/4"; 8; L: 125mm; Holder: square,hand; 18mm; 2pcs.
Kind of thread: inch; right hand thread; UN
Conform to the norm: DIN 2184-2
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Quantity in set/package: 2pcs.
Kind of holder: hand; square
Thread pitch: 8
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Thread: UN 1 1/4"
Category: Threading Dies and Taps
Description: Tap-set; UN 1 1/4"; 8; L: 125mm; Holder: square,hand; 18mm; 2pcs.
Kind of thread: inch; right hand thread; UN
Conform to the norm: DIN 2184-2
Holder socket size - mm: 18mm
Working part length: 45mm
Length: 125mm
Quantity in set/package: 2pcs.
Kind of holder: hand; square
Thread pitch: 8
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Thread: UN 1 1/4"
товару немає в наявності
В кошику
од. на суму грн.
| 00167190 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; 2pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Type of tool: tap - set
Holder socket size - mm: 29mm
Length: 125mm
Working part length: 40mm
Thread pitch: 12
Quantity in set/package: 2pcs.
Thread: UN 1 3/4"
Category: Threading Dies and Taps
Description: Tap-set; UN 1 3/4"; 12; L: 125mm; Holder: square,hand; 29mm; 2pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UN
Type of tool: tap - set
Holder socket size - mm: 29mm
Length: 125mm
Working part length: 40mm
Thread pitch: 12
Quantity in set/package: 2pcs.
Thread: UN 1 3/4"
товару немає в наявності
В кошику
од. на суму грн.
| 00167220 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs.
Type of tool: tap - set
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 1 7/8"
Thread pitch: 8
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UN 1 7/8"; 8; L: 140mm; Holder: square,hand; 29mm; 2pcs.
Type of tool: tap - set
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UN 1 7/8"
Thread pitch: 8
Length: 140mm
Working part length: 40mm
Kind of holder: hand; square
Holder socket size - mm: 29mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00167250 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 2 1/4"; 8; L: 160mm; Holder: square,hand; 35mm; 2pcs.
Type of tool: tap - set
Thread: UN 2 1/4"
Thread pitch: 8
Length: 160mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 35mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 40mm
Category: Threading Dies and Taps
Description: Tap-set; UN 2 1/4"; 8; L: 160mm; Holder: square,hand; 35mm; 2pcs.
Type of tool: tap - set
Thread: UN 2 1/4"
Thread pitch: 8
Length: 160mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 35mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 40mm
товару немає в наявності
В кошику
од. на суму грн.
| 00167270 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; 2pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Thread: UN 2 3/4"
Length: 0.2m
Holder socket size - mm: 39mm
Working part length: 56mm
Thread pitch: 8
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UN 2 3/4"; 8; L: 200mm; Holder: square,hand; 39mm; 2pcs.
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UN
Tools application: for blind holes; to the through holes
Type of tool: tap - set
Kind of holder: hand; square
Thread: UN 2 3/4"
Length: 0.2m
Holder socket size - mm: 39mm
Working part length: 56mm
Thread pitch: 8
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00174001 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 0
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
Material: high speed steel grounded HSS-G
Version: initial
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; initial
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 0
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
Material: high speed steel grounded HSS-G
Version: initial
товару немає в наявності
В кошику
од. на суму грн.
| 00174003 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 0
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
Material: high speed steel grounded HSS-G
Version: finishing
Category: Threading Dies and Taps
Description: Tap; UNF 0; 80; L: 32mm; Holder: square,hand; 2.1mm; finishing
Conform to the norm: DIN 2184-2
Tools application: for blind holes; to the through holes
Type of tool: tap
Kind of holder: hand; square
Kind of thread: inch; right hand thread; UNF
Thread: UNF 0
Holder socket size - mm: 2.1mm
Working part length: 8mm
Length: 32mm
Thread pitch: 80
Material: high speed steel grounded HSS-G
Version: finishing
товару немає в наявності
В кошику
од. на суму грн.
| 00174033 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 3
Thread pitch: 56
Length: 40mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 9mm
Category: Threading Dies and Taps
Description: Tap; UNF 3; 56; L: 40mm; Holder: square,hand; 2.1mm; finishing
Type of tool: tap
Thread: UNF 3
Thread pitch: 56
Length: 40mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 9mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174101 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial
Type of tool: tap
Thread: UNF 10
Thread pitch: 32
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Length: 50mm
Working part length: 16mm
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; initial
Type of tool: tap
Thread: UNF 10
Thread pitch: 32
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: initial
Length: 50mm
Working part length: 16mm
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174103 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing
Type of tool: tap
Thread: UNF 10
Thread pitch: 32
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Length: 50mm
Working part length: 16mm
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 10; 32; L: 50mm; Holder: square,hand; 4.9mm; finishing
Type of tool: tap
Thread: UNF 10
Thread pitch: 32
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Version: finishing
Length: 50mm
Working part length: 16mm
Kind of holder: hand; square
Holder socket size - mm: 4.9mm
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174123 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; finishing
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Type of tool: tap
Thread: UNF 12
Holder socket size - mm: 4.9mm
Working part length: 17mm
Length: 56mm
Thread pitch: 28
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; UNF 12; 28; L: 56mm; Holder: square,hand; 4.9mm; finishing
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Type of tool: tap
Thread: UNF 12
Holder socket size - mm: 4.9mm
Working part length: 17mm
Length: 56mm
Thread pitch: 28
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00174161 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 24mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; initial
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 24mm
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 578.88 грн |
| 3+ | 478.28 грн |
| 00174163 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 24mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; finishing
Type of tool: tap
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 24mm
на замовлення 4 шт:
термін постачання 14-30 дні (днів)
| Кількість | Ціна без ПДВ |
|---|---|
| 1+ | 578.88 грн |
| 3+ | 478.28 грн |
| 00174181 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; initial
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 9/16"
Version: initial
Thread pitch: 18
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 9/16"; 18; L: 70mm; Holder: square,hand; 9mm; initial
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 9/16"
Version: initial
Thread pitch: 18
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174191 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; initial
Length: 70mm
Tools application: for blind holes; to the through holes
Thread: UNF 5/8"
Version: initial
Thread pitch: 18
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; initial
Length: 70mm
Tools application: for blind holes; to the through holes
Thread: UNF 5/8"
Version: initial
Thread pitch: 18
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00174193 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; finishing
Length: 70mm
Thread: UNF 5/8"
Version: finishing
Thread pitch: 18
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Category: Threading Dies and Taps
Description: Tap; UNF 5/8"; 18; L: 70mm; Holder: square,hand; 9mm; finishing
Length: 70mm
Thread: UNF 5/8"
Version: finishing
Thread pitch: 18
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
товару немає в наявності
В кошику
од. на суму грн.
| 00174211 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UNF 3/4"
Thread pitch: 16
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; initial
Type of tool: tap
Thread: UNF 3/4"
Thread pitch: 16
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174233 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm
Type of tool: tap
Thread: UNF 7/8-14"
Thread pitch: 14
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNF 7/8-14"; 14; L: 80mm; Holder: square,hand; 14.5mm
Type of tool: tap
Thread: UNF 7/8-14"
Thread pitch: 14
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00174271 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; initial
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/8"
Version: initial
Thread pitch: 12
Length: 90mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; initial
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/8"
Version: initial
Thread pitch: 12
Length: 90mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174273 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; finishing
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/8"
Version: finishing
Thread pitch: 12
Length: 90mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/8"; 12; L: 90mm; Holder: square,hand; 22mm; finishing
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/8"
Version: finishing
Thread pitch: 12
Length: 90mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174281 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; initial
Version: initial
Length: 90mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/4"
Thread pitch: 12
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; initial
Version: initial
Length: 90mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/4"
Thread pitch: 12
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00174283 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; finishing
Version: finishing
Length: 90mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/4"
Thread pitch: 12
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
Category: Threading Dies and Taps
Description: Tap; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 22mm; finishing
Version: finishing
Length: 90mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 1 1/4"
Thread pitch: 12
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 22mm
Conform to the norm: DIN 2184-2
Kind of thread: inch; right hand thread; UNF
товару немає в наявності
В кошику
од. на суму грн.
| 00175000 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Length: 32mm
Material: high speed steel grounded HSS-G
Working part length: 8mm
Conform to the norm: DIN 2184-2
Thread: UNF 0
Thread pitch: 80
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 2.5mm
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UNF 0; 80; L: 32mm; Holder: square,hand; 2.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Length: 32mm
Material: high speed steel grounded HSS-G
Working part length: 8mm
Conform to the norm: DIN 2184-2
Thread: UNF 0
Thread pitch: 80
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 2.5mm
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00175050 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 5; 44; L: 40mm; Holder: square,hand; 3.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Thread: UNF 5
Thread pitch: 44
Length: 40mm
Working part length: 11mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 3.5mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap-set; UNF 5; 44; L: 40mm; Holder: square,hand; 3.5mm; 2pcs.
Tools application: for blind holes; to the through holes
Thread: UNF 5
Thread pitch: 44
Length: 40mm
Working part length: 11mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 3.5mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00175120 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 12; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 12
Thread pitch: 28
Length: 56mm
Working part length: 17mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 6mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UNF 12; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 12
Thread pitch: 28
Length: 56mm
Working part length: 17mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 6mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00175130 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 1/4"; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs.
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; inch; right hand thread; UNF
Kind of holder: hand; square
Type of tool: tap - set
Thread: UNF 1/4"
Holder socket size - mm: 6mm
Working part length: 19mm
Length: 56mm
Quantity in set/package: 2pcs.
Thread pitch: 28
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap-set; UNF 1/4"; 28; L: 56mm; Holder: square,hand; 6mm; 2pcs.
Tools application: for blind holes; to the through holes
Kind of thread: fine thread; inch; right hand thread; UNF
Kind of holder: hand; square
Type of tool: tap - set
Thread: UNF 1/4"
Holder socket size - mm: 6mm
Working part length: 19mm
Length: 56mm
Quantity in set/package: 2pcs.
Thread pitch: 28
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00175160 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Working part length: 24mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/16"; 20; L: 70mm; Holder: square,hand; 6.2mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 7/16"
Thread pitch: 20
Length: 70mm
Working part length: 24mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 6.2mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00175170 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; 2pcs.
Tools application: for blind holes; to the through holes
Thread: UNF 1/2"
Thread pitch: 20
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 7mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap-set; UNF 1/2"; 20; L: 70mm; Holder: square,hand; 7mm; 2pcs.
Tools application: for blind holes; to the through holes
Thread: UNF 1/2"
Thread pitch: 20
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 7mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00175210 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 3/4"
Thread pitch: 16
Length: 80mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 11mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
Category: Threading Dies and Taps
Description: Tap-set; UNF 3/4"; 16; L: 80mm; Holder: square,hand; 11mm; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNF 3/4"
Thread pitch: 16
Length: 80mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap - set
Holder socket size - mm: 11mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNF
Quantity in set/package: 2pcs.
товару немає в наявності
В кошику
од. на суму грн.
| 00175230 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs.
Type of tool: tap - set
Thread: UNF 7/8"
Thread pitch: 14
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UNF 7/8"; 14; L: 80mm; Holder: square,hand; 14.5mm; 2pcs.
Type of tool: tap - set
Thread: UNF 7/8"
Thread pitch: 14
Length: 80mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 14.5mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00175280 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 18mm; 2pcs.
Type of tool: tap - set
Thread: UNF 1 1/4"
Thread pitch: 12
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap-set; UNF 1 1/4"; 12; L: 90mm; Holder: square,hand; 18mm; 2pcs.
Type of tool: tap - set
Thread: UNF 1 1/4"
Thread pitch: 12
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: fine thread; inch; right hand thread; UNF
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00176051 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; initial
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 7/16"
Holder socket size - mm: 6.2mm
Working part length: 20mm
Length: 63mm
Thread pitch: 28
Category: Threading Dies and Taps
Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; initial
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 7/16"
Holder socket size - mm: 6.2mm
Working part length: 20mm
Length: 63mm
Thread pitch: 28
товару немає в наявності
В кошику
од. на суму грн.
| 00176053 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; finishing
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 7/16"
Holder socket size - mm: 6.2mm
Working part length: 20mm
Length: 63mm
Thread pitch: 28
Category: Threading Dies and Taps
Description: Tap; UNEF 7/16"; 28; L: 63mm; Holder: square,hand; 6.2mm; finishing
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Type of tool: tap
Thread: UNEF 7/16"
Holder socket size - mm: 6.2mm
Working part length: 20mm
Length: 63mm
Thread pitch: 28
товару немає в наявності
В кошику
од. на суму грн.
| 00176081 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; initial
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 5/8"
Version: initial
Thread pitch: 24
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: inch; right hand thread; UNEF
Category: Threading Dies and Taps
Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; initial
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 5/8"
Version: initial
Thread pitch: 24
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: inch; right hand thread; UNEF
товару немає в наявності
В кошику
од. на суму грн.
| 00176083 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; finishing
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 5/8"
Version: finishing
Thread pitch: 24
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: inch; right hand thread; UNEF
Category: Threading Dies and Taps
Description: Tap; UNEF 5/8"; 24; L: 70mm; Holder: square,hand; 9mm; finishing
Conform to the norm: DIN 2184-2
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 5/8"
Version: finishing
Thread pitch: 24
Length: 70mm
Working part length: 22mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 9mm
Kind of thread: inch; right hand thread; UNEF
товару немає в наявності
В кошику
од. на суму грн.
| 00176171 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; initial
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 3/16"
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 22mm
Length: 90mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Category: Threading Dies and Taps
Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; initial
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 3/16"
Type of tool: tap
Holder socket size - mm: 18mm
Working part length: 22mm
Length: 90mm
Thread pitch: 18
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
товару немає в наявності
В кошику
од. на суму грн.
| 00176173 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; finishing
Type of tool: tap
Thread: UNEF 1 3/16"
Thread pitch: 18
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
Category: Threading Dies and Taps
Description: Tap; UNEF 1 3/16"; 18; L: 90mm; Holder: square,hand; 18mm; finishing
Type of tool: tap
Thread: UNEF 1 3/16"
Thread pitch: 18
Length: 90mm
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 18mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: finishing
Working part length: 22mm
товару немає в наявності
В кошику
од. на суму грн.
| 00176221 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial
Type of tool: tap
Thread: UNEF 1 1/2"
Thread pitch: 18
Length: 0.1m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 25mm
Category: Threading Dies and Taps
Description: Tap; UNEF 1 1/2"; 18; L: 100mm; Holder: square,hand; 22mm; initial
Type of tool: tap
Thread: UNEF 1 1/2"
Thread pitch: 18
Length: 0.1m
Conform to the norm: DIN 2184-2
Kind of holder: hand; square
Holder socket size - mm: 22mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Version: initial
Working part length: 25mm
товару немає в наявності
В кошику
од. на суму грн.
| 00176231 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Kind of thread: inch; right hand thread; UNEF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1 9/16"
Version: initial
Thread pitch: 18
Length: 0.1m
Working part length: 25mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 24mm
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Kind of thread: inch; right hand thread; UNEF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1 9/16"
Version: initial
Thread pitch: 18
Length: 0.1m
Working part length: 25mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 24mm
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00176233 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm
Kind of thread: inch; right hand thread; UNEF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1 9/16"
Version: finishing
Thread pitch: 18
Length: 0.1m
Working part length: 25mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 24mm
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap; UNEF 1 9/16"; 18; L: 100mm; Holder: square,hand; 24mm
Kind of thread: inch; right hand thread; UNEF
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1 9/16"
Version: finishing
Thread pitch: 18
Length: 0.1m
Working part length: 25mm
Kind of holder: hand; square
Type of tool: tap
Holder socket size - mm: 24mm
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00176241 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 5/8"
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 24mm
Working part length: 25mm
Length: 0.1m
Thread pitch: 18
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; initial
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 5/8"
Conform to the norm: DIN 2184-2
Version: initial
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 24mm
Working part length: 25mm
Length: 0.1m
Thread pitch: 18
товару немає в наявності
В кошику
од. на суму грн.
| 00176243 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 5/8"
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 24mm
Working part length: 25mm
Length: 0.1m
Thread pitch: 18
Category: Threading Dies and Taps
Description: Tap; UNEF 1 5/8"; 18; L: 100mm; Holder: square,hand; 24mm; finishing
Kind of thread: inch; right hand thread; UNEF
Thread: UNEF 1 5/8"
Conform to the norm: DIN 2184-2
Version: finishing
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Type of tool: tap
Holder socket size - mm: 24mm
Working part length: 25mm
Length: 0.1m
Thread pitch: 18
товару немає в наявності
В кошику
од. на суму грн.
| 00177020 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1/4"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1/4"
Thread pitch: 32
Length: 56mm
Working part length: 14mm
Kind of holder: hand; square
Type of tool: tap - set
Category: Threading Dies and Taps
Description: Tap-set; UNEF 1/4"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Holder socket size - mm: 4.9mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Quantity in set/package: 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Thread: UNEF 1/4"
Thread pitch: 32
Length: 56mm
Working part length: 14mm
Kind of holder: hand; square
Type of tool: tap - set
товару немає в наявності
В кошику
од. на суму грн.
| 00177030 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNEF 5/16"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Quantity in set/package: 2pcs.
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: UNEF 5/16"
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 18mm
Length: 56mm
Thread pitch: 32
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
Category: Threading Dies and Taps
Description: Tap-set; UNEF 5/16"; 32; L: 56mm; Holder: square,hand; 4.9mm; 2pcs.
Quantity in set/package: 2pcs.
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Thread: UNEF 5/16"
Type of tool: tap - set
Holder socket size - mm: 4.9mm
Working part length: 18mm
Length: 56mm
Thread pitch: 32
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 2184-2
товару немає в наявності
В кошику
од. на суму грн.
| 00177040 |
|
Виробник: GSR
Category: Threading Dies and Taps
Description: Tap-set; UNEF 3/8"; 32; L: 63mm; Holder: square,hand; 5.5mm; 2pcs.
Type of tool: tap - set
Length: 63mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNEF 3/8"
Holder socket size - mm: 5.5mm
Working part length: 20mm
Quantity in set/package: 2pcs.
Thread pitch: 32
Category: Threading Dies and Taps
Description: Tap-set; UNEF 3/8"; 32; L: 63mm; Holder: square,hand; 5.5mm; 2pcs.
Type of tool: tap - set
Length: 63mm
Conform to the norm: DIN 2184-2
Kind of thread: fine thread; inch; right hand thread; UNEF
Tools application: for blind holes; to the through holes
Kind of holder: hand; square
Material: high speed steel grounded HSS-G
Thread: UNEF 3/8"
Holder socket size - mm: 5.5mm
Working part length: 20mm
Quantity in set/package: 2pcs.
Thread pitch: 32
товару немає в наявності
В кошику
од. на суму грн.