Продукція > MARKI MICROWAVE > Всі товари виробника MARKI MICROWAVE (94) > Сторінка 1 з 2

Виробник: Marki Microwave
Signal Conditioning The ABDS-10170PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. It offers 3 dB differential to single ended gain from low frequencies (limited by DC block) to 30 GHz.

Виробник: Marki Microwave
RF Amplifier A broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 dB typical gain and 20 dBm typical saturated output power for 165 mA of current

Виробник: Marki Microwave
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.

Виробник: Marki Microwave
RF Amplifier A high-linearity, high gain, low noise distributed amplifier capable of providing +23 dBm output power up to 38 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to

Виробник: Marki Microwave
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.

Виробник: Marki Microwave
RF Amplifier A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.

Виробник: Marki Microwave
Attenuators The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN01-0070CSP1 features a typical 1.3 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.

Виробник: Marki Microwave
Attenuators The ATN10-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN10-0070CSP1 features a typical 10.2 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.

Виробник: Marki Microwave
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Виробник: Marki Microwave
Signal Conditioning The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Виробник: Marki Microwave
RF Adapters - Tee The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Виробник: Marki Microwave
RF Adapters - Tee The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Виробник: Marki Microwave
Signal Conditioning The C20-0116 is a broadband 1-16 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Виробник: Marki Microwave
Signal Conditioning The C20-0226 is a broadband 2-26.5 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Виробник: Marki Microwave
Signal Conditioning The C20-0240 is a broadband 2-40 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Виробник: Marki Microwave
Signal Conditioning The CE16-0220T is a next generation broadband 2GHz to 20GHz, 16dB directional coupler from the Marki Elite Series. Conductive paint is applied to all Elite Series products to reduce EMI/RFI leakage and susceptibility.

Виробник: Marki Microwave
RF Development Tools The EVAL-HLM-20P is a connectorized evaluation board for the HLM-20PSM DC-40 GHz surface mount amplifier.

Виробник: Marki Microwave
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).

Виробник: Marki Microwave
RF Development Tools The EVB-ATN01-0070 is a connectorized evaluation board for the ATN01-0070CSP1 GaAs MMIC surface mount 70 GHz 1dB attenuator.

Виробник: Marki Microwave
RF Development Tools The EVB-ATN06-0050 is a connectorized evaluation board for the ATN06-0050CSPI Chip Scale Package surface mount 50 GHz 6dB Attenuator.

Виробник: Marki Microwave
RF Development Tools The MFBC-00001P is a connectorized evaluation board for the MFBC-00001PSM passive MMIC surface mount 7.40 9.90 GHz bandpass filters.

Виробник: Marki Microwave
RF Development Tools The EVB-MFBC-00010P is a connectorized evaluation board for the MFBC-00010PSM passive MMIC surface mount 14.6018.90 GHz bandpass filter.

Виробник: Marki Microwave
RF Development Tools The MFBP-00001P is a connectorized evaluation board for the MFBP-00001PSM passive MMIC surface mount 4.7 - 6.2 GHz bandpass filters.

Виробник: Marki Microwave
RF Development Tools The MFBP-00010P is a connectorized evaluation board for the MFBP-00010PSM passive MMIC surface mount 2.20-5.90 GHz bandpass filters.

Виробник: Marki Microwave
RF Development Tools The EVB-MFHP-00001P is a connectorized evaluation board for the MFHP-00001PSM passive MMIC surface mount 2GHz highpass filter.

Виробник: Marki Microwave
RF Development Tools The EVB-MFLP-00001P is a connectorized evaluation board for the MFLP-00001PSM passive MMIC surface mount 6.1GHz lowpass filter.

Виробник: Marki Microwave
RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.

Виробник: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Виробник: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Виробник: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Виробник: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac

Виробник: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.

Виробник: Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1

Виробник: Marki Microwave
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3.

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFLP-00001PSM is a passive MMIC surface mount 6.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. The MFLP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
RF Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyon

Виробник: Marki Microwave
Signal Conditioning The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Виробник: Marki Microwave
Signal Conditioning MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.

Виробник: Marki Microwave
RF Mixer The MM2-0530LSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530LSM is 4x4 mm QFN packaged.

Виробник: Marki Microwave
Signal Conditioning The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz.

Виробник: Marki Microwave
RF Mixer The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion