Продукція > MARKI MICROWAVE > Всі товари виробника MARKI MICROWAVE (321) > Сторінка 4 з 6

Виробник: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference

Виробник: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference

Виробник: Marki Microwave
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm

Виробник: Marki Microwave
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MC10-25110M2 is a mmWave 25-110 GHz, 10dB directional coupler in our connectorized miniature M2-package enabling operation up to 110 GHz. The coupler features excellent directivity, return loss and coupling accuracy.

Виробник: Marki Microwave
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac

Виробник: Marki Microwave
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.

Виробник: Marki Microwave
Signal Conditioning This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.

Виробник: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.

Виробник: Marki Microwave
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.

Виробник: Marki Microwave
Equalisers The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12d

Виробник: Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1

Виробник: Marki Microwave
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. MFBC-00004CSP3 features a 15-19.8GHz 1dBc passband and 1.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00030PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00065CSP3 is available as a 3.5 mm CSP3.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00072CSP3 features a 30.8-36.1GHz 1dBc passband and 2.6dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00079CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00082CSP3 features a 14-15.9GHz 1dBc passband and 2.7dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00085CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00085CSP3 features a 9-14.4GHz 1dBc passband and 1.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00086CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00086CSP3 features a 12.7-17.9GHz 1dBc passband and 1.9dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00110CSP3 features a 6.0-8.4GHz 1dBc passband and 2.5dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00118CSP3 features a 26.3-39.4GHz 1dBc passband and 1.4dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00127CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00129CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00143CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00143CSP3 features a 10.7-11.3GHz 1dBc passband and 6.0dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00144CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00144CSP3 features a 6.9-14.7GHz 1dBc passband and 1.6dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00145CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00145CSP3 features a 3.8-16.7GHz 1dBc passband and 0.9dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFLP-00001PSM is a passive MMIC surface mount 6.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. The MFLP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.

Виробник: Marki Microwave
RF Mixer The MM1-0212LSM is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212LSM is a low frequency, low power S band mixer that works well as both an up and down converter through X band.

Виробник: Marki Microwave
Signal Conditioning MM1-0212S is a highly linear GaAs MMIC double balanced mixer. MM1-0212S is a low frequency, high linearity S band mixer that works well as both an up and down converter to through X band.

Виробник: Marki Microwave
RF Mixer The MM1-0212SSM is a highly linear GaAs MMIC double balanced mixer. MM1-0212SSM is a low frequency, high linearity S band mixer that works well as both an up and down converter through X band.

Виробник: Marki Microwave
Signal Conditioning MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku b

Виробник: Marki Microwave
RF Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyon

Виробник: Marki Microwave
Signal Conditioning The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Виробник: Marki Microwave
RF Mixer The MM1-0312HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.

Виробник: Marki Microwave
Signal Conditioning The MM1-0312S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Виробник: Marki Microwave
RF Mixer The MM1-0312SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.

Виробник: Marki Microwave
Signal Conditioning The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Виробник: Marki Microwave
RF Mixer The MM1-0626SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.

Виробник: Marki Microwave
Signal Conditioning The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.

Виробник: Marki Microwave
Signal Conditioning The MM1-1240S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Виробник: Marki Microwave
RF Mixer The MM1-1453LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth.The MM1-1453LSM is available in a 4x4 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.

Виробник: Marki Microwave
Signal Conditioning MM1-35130H is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across an incredibly broad bandwidth.