Продукція > MARKI MICROWAVE > Всі товари виробника MARKI MICROWAVE (452) > Сторінка 5 з 8

Виробник: Marki Microwave
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.

Виробник: Marki Microwave
Signal Conditioning The HLM-20PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-20GHz bandwidth. It offers low insertion loss and excellent return loss from DC through K band and has a typical 1 dB compression point

Виробник: Marki Microwave
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm

Виробник: Marki Microwave
Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression poin

Виробник: Marki Microwave
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.

Виробник: Marki Microwave
Signal Conditioning The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip

Виробник: Marki Microwave
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.

Виробник: Marki Microwave
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system

Виробник: Marki Microwave
Signal Conditioning The MC10-25110M2 is a mmWave 25-110 GHz, 10dB directional coupler in our connectorized miniature M2-package enabling operation up to 110 GHz. The coupler features excellent directivity, return loss and coupling accuracy.

Виробник: Marki Microwave
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac

Виробник: Marki Microwave

Виробник: Marki Microwave

Виробник: Marki Microwave
Equalisers The MEQ10-14ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 14GHz with DC attenuation options between 3 and

Виробник: Marki Microwave
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.

Виробник: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ3-20CSP1 provides 2.5dB positive slope equalization from DC to 20GHz with a DC attenuation of 3dB.

Виробник: Marki Microwave
Equalisers A passive MMIC equalizer in our compact 1.5mm CSP1 chip scale surface mount package. The MEQ6-40CSP1 provides a positive slope equalization from DC-40 GHz with a DC attenuation of 6 dB, and achieves a 21 dB return loss all in a compact form fac

Виробник: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.

Виробник: Marki Microwave
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.

Виробник: Marki Microwave
Equalisers The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12d

Виробник: Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1

Виробник: Marki Microwave
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.

Виробник: Marki Microwave
Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. Available in a connectorized bullet hou

Виробник: Marki Microwave
Signal Conditioning The MFBA-00004PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering.The MFBA-00004PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBC-00003PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00003PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. MFBC-00004CSP3 features a 15-19.8GHz 1dBc passband and 1.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00030PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 27.8-35.2 GHz 1 dBc passband, 2.2 dB center frequency insertion loss and 24 dB return loss. Available in a connectorized bullet hous

Виробник: Marki Microwave
Signal Conditioning The MFBP-00060PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00060PSM is available as a 5x5mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00065CSP3 is available as a 3.5 mm CSP3.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00072CSP3 features a 30.8-36.1GHz 1dBc passband and 2.6dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00079CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00082CSP3 features a 14-15.9GHz 1dBc passband and 2.7dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00085CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00085CSP3 features a 9-14.4GHz 1dBc passband and 1.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00086CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00086CSP3 features a 12.7-17.9GHz 1dBc passband and 1.9dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00099PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00099PSM features a 9.0-10.4GHz 1dBc passband and 2.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00104PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00104PSM is available as a 6 mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00109CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00109CSP3 features a 4.0-6.1GHz 1dBc passband and 2.4dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00110CSP3 features a 6.0-8.4GHz 1dBc passband and 2.5dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00118CSP3 features a 26.3-39.4GHz 1dBc passband and 1.4dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00127CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00129CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00137PSM features a 7.7-12.8GHz 1dBc passband and 1.8dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00143CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00143CSP3 features a 10.7-11.3GHz 1dBc passband and 6.0dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00144CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00144CSP3 features a 6.9-14.7GHz 1dBc passband and 1.6dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFBP-00145CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00145CSP3 features a 3.8-16.7GHz 1dBc passband and 0.9dB center frequency insertion loss.

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet

Виробник: Marki Microwave
Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN.

Виробник: Marki Microwave
Signal Conditioning The MFHP-00002BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00002BH features a 9.8 GHz 3 dBc cutoff frequency and 15 dB passband return loss. Available in a connectorized bullet

Виробник: Marki Microwave
Signal Conditioning The MFHP-00008CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFHP-00008CSP1 is available as a 1.5x1.5 mm CSP.