Продукція > Art
| Назва | Виробник | Інформація | Доступність | Ціна без ПДВ | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ART.AGT-199 | AG TERMOPASTY | Category: Protection & screen coatings Description: Varnish; transparent; liquid; 50ml; LAKIER PVB; Temp: -50÷150°C Appearance: liquid Kind of package: bottle Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H315: Causes skin irritation; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P264: Wash ...thoroughly after handling; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P312: Call a POISON CENTER or doctor/physician if you feel unwell. GHS Code: GHS02; GHS05; GHS07 Colour: transparent Operating temperature: -50...150°C Type of agent: varnish Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer Capacity: 50ml Flash point: 380°C Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK Agent application: electronic equipment; PCBs Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion Name: LAKIER PVB | на замовлення 214 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-200 | AG TERMOPASTY | Category: Cleaning Agents Description: Agent: cleaning agent; 1000ml; Appearance: liquid Appearance: liquid Kind of package: metal container Type of agent: cleaning agent Agent features: harmless; non-flammable; water based Capacity: 1l Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK Application: flux removing; for ultrasonic washer; soldeing paste removing | на замовлення 87 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-201 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; milky; Temp: -50÷200°C Operating temperature: -50...200°C Surface resistance: <10TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK Net weight: 106g Bonding time: 30min Appearance: encapsulating compound; liquid GHS Code: GHS02; GHS07; GHS08 Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 58 Signal word: Danger Dielectric strength: 10kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: milky Mix ratio: 100:6 | на замовлення 32 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-202 Kontakt IPA+ 600ml | AG TERMOPASTY | IPA+ cleaner 600ml spray; colorless; flashpoint: 12°C Universal cleaner for optical and magnetic devices ART.AGT-202 Kontakt IPA+ 600ml AG Termopasty CH K-IPA+600 кількість в упаковці: 2 шт | на замовлення 4 шт: термін постачання 28-31 дні (днів) |
| ||||||||
| ART.AGT-205 | AG TERMOPASTY | Category: Soldering Chemicals Others Description: Agent: soldering fluid; 100ml; WODA LUTOWNICZA Type of agent: soldering fluid Signal word: Danger Hazard statements: H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.; H411: Toxic to aquatic life with long lasting effects Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P271: Use only outdoors or in a well-ventilated area.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician. GHS Code: GHS05; GHS07; GHS09 Capacity: 0.1l Name: WODA LUTOWNICZA Applications of soldering equipment: for galvanized steel soldering; soft soldering; tinned elements soldering | на замовлення 20 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-209 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaning agent; 400ml; spray; can; Signal word: Danger Kind of package: can Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H336: May cause drowsiness or dizziness; H361: Suspected of damaging fertility or the unborn child; H373: May cause damage to organs; H411: Toxic to aquatic life with long lasting effects Type of agent: cleaning agent Capacity: 0.4l Available labels languages: DE; EN; PL; RU Agent application: breaks and couplings; metals Appearance: spray GHS Code: GHS02; GHS07; GHS08; GHS09 Application: adhesives removing; cleaning; degreasing; deposits removing; grease removing; oil removing; removing dried oils; surface preparation prior to painting Signal word: Danger | на замовлення 23 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-212 | AG TERMOPASTY | Category: Chemicals others Description: CO sensors tester; 0.4l; spray Type of agent: CO sensors tester Capacity: 0.4l Appearance: spray Application: testing smoke detectors for correct operation Kind of package: can Signal word: Warning Hazard statements: H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS07 Agent features: does not pollute Agent application: carbon monoxide users; chimney sweeping services; technical services | на замовлення 11 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-213 | AG TERMOPASTY | Category: Lubricants Description: Grease; spray; can; 100ml; Signal word: Danger Type of agent: grease Appearance: spray Application: facilitate loosening of corroded and stuck screws; increase tool life; prevening from moisture; protection against corrosion Agent features: forms a moisture displacer; leaves a thin film of oil; prevents from corrosion Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H304: May be fatal if swallowed and enters airways. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS08 Capacity: 0.1l Kind of package: can Agent application: hinges; locks; screws; tools | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-215 | AG TERMOPASTY | Category: Lubricants Description: Grease; spray; can; 100ml; Application: lubrication Type of agent: grease Appearance: spray Application: lubrication Agent features: cleans and maintains; corrosion inhibitor; extends the service life; moisture repellent; reduces friction Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Capacity: 0.1l Kind of package: can Agent application: dampers | на замовлення 11 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-216/P | AG TERMOPASTY | Category: Compressed Air and Freezers Description: Compressed gas; can; colourless; 400ml; Compressed Gas Kind of package: can Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Colour: colourless Type of agent: compressed gas Agent features: flammable Capacity: 0.4l Agent application: computer equipment; electronic equipment; optical equipment GHS Code: GHS02 Application: cleaning; dust removing Signal word: Danger Name: Compressed Gas | на замовлення 47 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-217 | AG TERMOPASTY | Category: Protection & screen coatings Description: Varnish; transparent; liquid; 1000ml; LAKIER PVB; Temp: -50÷150°C Type of agent: varnish Colour: transparent Appearance: liquid Capacity: 1l Name: LAKIER PVB Kind of package: bottle Operating temperature: -50...150°C Flash point: 380°C Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK Agent application: electronic equipment; PCBs Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H315: Causes skin irritation; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P264: Wash ...thoroughly after handling; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P312: Call a POISON CENTER or doctor/physician if you feel unwell. GHS Code: GHS02; GHS05; GHS07 | на замовлення 48 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-219 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; transparent; -50÷200°C Operating temperature: -50...200°C Surface resistance: <10TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 970mg/cm3 Dielectric constant: 3 Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK Net weight: 108g Bonding time: 40min Appearance: encapsulating compound; liquid GHS Code: GHS02; GHS07; GHS08 Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 26 Signal word: Danger Dielectric strength: 10kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: transparent Mix ratio: 100:8 | на замовлення 33 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-220 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C Operating temperature: -50...200°C Surface resistance: <2410TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK Net weight: 110g Thermal conductivity: 1.2W/mK Bonding time: 30min Appearance: encapsulating compound; paste GHS Code: GHS02; GHS07; GHS08 Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 59 Signal word: Danger Dielectric strength: 20kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: white Mix ratio: 100:10 | на замовлення 14 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-221 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; paste,encapsulating compound; grey; Temp: -50÷200°C Operating temperature: -50...200°C Surface resistance: <1750TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.08g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK Net weight: 110g Thermal conductivity: 2W/mK Bonding time: 30min Appearance: encapsulating compound; paste GHS Code: GHS02; GHS07; GHS08 Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 67 Signal word: Danger Dielectric strength: 20kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: grey Mix ratio: 100:10 | на замовлення 50 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-222 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; encapsulating compound; transparent; Temp: -50÷180°C Resistance to: UV rays Operating temperature: -50...180°C Type of agent: silicone Agent features: additive linking; two-component Density: 980mg/cm3 @ 25°C Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK Net weight: 0.1kg Bonding time: 70min Appearance: encapsulating compound Application: sealing and encapsulation of electronic circuits Colour: transparent Mix ratio: 3:2 | на замовлення 24 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-223 | AG TERMOPASTY | Category: Encapsulating materials Description: Epoxy encapsulating compound; resin; Signal word: Danger Kind of package: can; syringe Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Hazard statements: H226: Flammable liquid and vapour.; H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H372: Causes damage to organs; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects. Mix ratio: 100:10 Type of agent: epoxy encapsulating compound Bonding time: 33min Appearance: resin GHS Code: GHS02; GHS05; GHS07; GHS08; GHS09 Curing method: RTV Application: sealing and encapsulation of electronic circuits Signal word: Danger | на замовлення 39 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-224 | AG TERMOPASTY | Category: Encapsulating materials Description: Epoxy encapsulating compound; resin; Curing method: RTV Appearance: resin Kind of package: can; syringe Signal word: Danger; Warning Hazard statements: H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P264: Wash ...thoroughly after handling; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. GHS Code: GHS05; GHS07; GHS09 Mix ratio: 100:12 Type of agent: epoxy encapsulating compound Bonding time: 33min Curing method: RTV Application: sealing and encapsulation of electronic circuits | на замовлення 8 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-225 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 400ml; spray; can; cleaning Appearance: spray Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Colour: colourless Type of agent: isopropyl alcohol Capacity: 0.4l Density: 0.79g/cm3 @ 20°C Agent application: electronic equipment; metals; optical equipment; PCBs Application: cleaning Name: KONTAKT IPA Plus | на замовлення 433 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-226 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaning agent; 400ml; spray; can; Signal word: Danger Kind of package: can Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects. Type of agent: cleaning agent Capacity: 0.4l Agent application: electrical contacts; PCBs Appearance: spray GHS Code: GHS02; GHS07; GHS08 Application: cleaning; degreasing; flux removing; protection against corrosion Signal word: Danger | на замовлення 80 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-227 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaning agent; KONTAKT S; 400ml; spray; can; Signal word: Danger Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects. Type of agent: cleaning agent Capacity: 0.4l Kind of package: can Agent application: electrical contacts; electronic equipment Appearance: spray GHS Code: GHS02; GHS07; GHS08 Application: cleaning; preservation Signal word: Danger Name: KONTAKT S | на замовлення 16 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-228 | AG TERMOPASTY | Category: Protection & screen coatings Description: Protective coating; colourless; spray; 400ml; Signal word: Danger Type of agent: protective coating Capacity: 0.4l Appearance: spray Application: extrusion of plastics; production of plastic laminates; vacuum forming of plastics Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: anti adhesive; glidant Colour: colourless Name: ROZDZIELACZ BEZSILIKONOWY DO FORM | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-229 | AG TERMOPASTY | Category: Compressed Air and Freezers Description: Compressed gas; can; colourless; 300ml; Compressed Gas Kind of package: can Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P403: Protect from sunlight. Store in a well-ventilated place. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Colour: colourless Type of agent: compressed gas Agent features: flammable Capacity: 0.3l Agent application: computer equipment; electronic equipment; optical equipment GHS Code: GHS02 Application: cleaning; dust removing Signal word: Danger Name: Compressed Gas | на замовлення 17 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-232 | AG TERMOPASTY | Category: Protection & screen coatings Description: Varnish; transparent; spray; 100ml; LAKIER PVB; Temp: -50÷150°C Type of agent: varnish Colour: transparent Appearance: spray Capacity: 0.1l Name: LAKIER PVB Kind of package: can Operating temperature: -50...150°C Flash point: 380°C Agent application: electronic equipment; PCBs Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS05; GHS07 | на замовлення 41 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-233 | AG TERMOPASTY | Category: Compressed Air and Freezers Description: Compressed gas; can; colourless; 600ml; Compressed Gas Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Colour: colourless Type of agent: compressed gas Agent features: flammable Capacity: 0.6l Agent application: computer equipment; electronic equipment; optical equipment Application: cleaning; dust removing Name: Compressed Gas | на замовлення 184 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-233 стиснене повітря Код товару: 209114
Додати до обраних
Обраний товар
| Хімія > Засоби очищення | товару немає в наявності
| В кошику од. на суму грн. | |||||||||
| ART.AGT-235 | AG TERMOPASTY | Category: Fluxes Description: Flux: rosin based; RMA; spray; can; 0.1l; 750mg/cm3@20°C Type of flux: rosin based Kind of flux: RMA Appearance: spray Kind of package: can Capacity: 0.1l Applications of soldering equipment: PCB protection against oxidation; soldering of heavily oxidized surfaces Density: 0.75g/cm3 @ 20°C Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Conform to the norm: PN EN 29454 1.1.1.A. Name: LAKIER TOPNIK LT-4 Soldering equipment features: easy distribution of the preparation | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-237 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaner; 0.1l; spray; can; flux removing,impurities removing Type of agent: cleaner Capacity: 0.1l Appearance: spray Kind of package: can Application: flux removing; impurities removing Agent application: PCBs Agent features: based on alcohol Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 | на замовлення 5 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-238 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaner; 0.4l; spray; can; flux removing,impurities removing Appearance: spray Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Type of agent: cleaner Agent features: based on alcohol Capacity: 0.4l Agent application: PCBs Application: flux removing; impurities removing | на замовлення 486 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-240 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 28.2mm; L: 41.5mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Length: 41.5mm Quantity in set/package: 5pcs. Type of tape: heat transfer Version: double-sided; glued Thickness: 0.3mm Width: 28.2mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-241 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 13mm; L: 18mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Length: 18mm Quantity in set/package: 5pcs. Type of tape: heat transfer Version: double-sided; glued Thickness: 0.3mm Width: 13mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting | на замовлення 17 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-242 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 18mm; L: 23mm; Thk: 0.3mm; 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Type of tape: heat transfer Version: double-sided; glued Length: 23mm Thickness: 0.3mm Width: 18mm Thermal conductivity: 1.5W/mK | на замовлення 29 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-243 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 25mm; L: 26mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Type of tape: heat transfer Width: 25mm Length: 26mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glued Quantity in set/package: 5pcs. | на замовлення 76 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-246 | AG TERMOPASTY | Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Type of agent: soldering acid Capacity: 0.1l GHS Code: GHS05; GHS07 Application: for difficult to tin nickel surfaces Signal word: Danger Name: KWAS LUTOWNICZY | на замовлення 36 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-247 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; grey; stainless steel particles,silicone Colour: grey Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Grease ingredients: silicone; stainless steel particles Operating temperature: -50...250°C Type of agent: heat transfer paste Net weight: 0.1kg Thermal conductivity: 6W/mK Kind of package: plastic container Agent application: heatsinks Appearance: paste GHS Code: GHS09 Application: facilitates heat transfer Signal word: Warning Name: AG EXTREME | на замовлення 29 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-248 | AG TERMOPASTY | Category: Fluxes Description: Flux: rosin based; halide-free,Lead Free,No Clean,ROL0; liquid Type of flux: rosin based Kind of flux: halide-free; Lead Free; No Clean; ROL0 Appearance: liquid Kind of package: bottle Soldering equipment features: can be washed down with alcohol based agents Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ... GHS Code: GHS02; GHS07; GHS08 Flux residues: non-corrosive Colour: amber Capacity: 50ml Density: 794mg/cm3 @ 25°C Solids content: 0...5% | на замовлення 165 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-249 | AG TERMOPASTY | Category: Fluxes Description: Flux: rosin based; halide-free,No Clean,ROL0; liquid; pen; 8ml Type of flux: rosin based Kind of flux: halide-free; No Clean; ROL0 Appearance: liquid Kind of package: pen Capacity: 8ml Applications of soldering equipment: tinning elements coated with polyurethane varnishes Density: 860mg/cm3 @ 20°C Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction. GHS Code: GHS02; GHS05; GHS07; GHS08 Conform to the norm: PN EN 29454 Name: TK83 Colour: amber Flux name: SW26 Soldering equipment features: can be washed down with alcohol based agents Solids content: 24% | на замовлення 63 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-250 | AG TERMOPASTY | Category: Chemicals others Description: Electrically conductive rubber; black; W: 50mm; L: 50mm; Thk: 0.5mm Colour: black Length: 50mm Type of agent: electrically conductive rubber Agent features: electrically conductive Application: calculators; control boards; for computer; for notebooks Thickness: 0.5mm Width: 50mm Name: GUMA ELEKTROPRZEWODZĄCA | на замовлення 29 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-251 | AG TERMOPASTY | Category: Chemicals others Description: Electrically conductive rubber; black; W: 50mm; L: 150mm Type of agent: electrically conductive rubber Agent features: electrically conductive Colour: black Length: 0.15m Application: calculators; control boards; for computer; for notebooks Thickness: 0.5mm Width: 50mm Name: GUMA ELEKTROPRZEWODZĄCA | на замовлення 2 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-252 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless Appearance: liquid Kind of package: bottle with atomizer Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. GHS Code: GHS02; GHS07 Colour: colourless Type of agent: isopropyl alcohol Capacity: 0.5l Density: 0.79g/cm3 @ 20°C Agent application: electronic equipment; metals; optical equipment; PCBs Application: cleaning Name: KONTAKT IPA Plus | на замовлення 368 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-253 | AG TERMOPASTY | Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Type of agent: soldering acid GHS Code: GHS05; GHS07 Application: for difficult to tin nickel surfaces Capacity: 50ml Name: KWAS LUTOWNICZY Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. | на замовлення 4 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-254 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger Type of agent: cleaning agent Name: KONTAKT PR Capacity: 0.4l Appearance: spray Kind of package: can Application: cleaning; lubrication; regeneration Agent application: potentiometers Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 | на замовлення 11 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-256 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l Kit contents: cleaning fluid; microfiber cloth Capacity: 0.25l Agent application: computer equipment; LCD/TFT displays; office equipment Type of cleaning cloth: cleaning set Application: dust removing; impurities removing Name: SMARTGEL | на замовлення 9 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-257 | AG TERMOPASTY | Category: Wipes & cleaning clothes Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry Version: dry Cloth dimensions: 300x300mm Agent application: computer equipment; office equipment Type of cleaning cloth: cloth Application: cleaning Quantity in set/package: 5pcs. Material: microfiber | на замовлення 23 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-262 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C Operating temperature: -50...200°C Surface resistance: <2410TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK Net weight: 1kg Thermal conductivity: 1.2W/mK Bonding time: 30min Appearance: encapsulating compound; paste GHS Code: GHS02; GHS07; GHS08 Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 59 Signal word: Danger Dielectric strength: 20kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: white Mix ratio: 100:10 | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-264 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C Type of agent: silicone encapsulating compound Colour: transparent Application: sealing and encapsulation of electronic circuits Operating temperature: -50...180°C Density: 980mg/cm3 @ 25°C Mix ratio: 3:2 Bonding time: 70min Agent features: additive linking; two-component Net weight: 1kg Resistance to: UV rays | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-266 | AG TERMOPASTY | Category: Soldering Chemicals Others Description: Gas: butane; 200ml; can; for gas soldering iron Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: universal filling valve Capacity: 0.2l Type of gas: butane Applications of soldering equipment: for gas soldering iron | на замовлення 204 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-267 | AG TERMOPASTY | Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Colour: colourless Type of agent: isopropyl alcohol Capacity: 0.25l Density: 0.79g/cm3 @ 20°C Kind of package: bottle with atomizer Agent application: electronic equipment; metals; optical equipment; PCBs Appearance: liquid GHS Code: GHS02; GHS07 Application: cleaning Signal word: Danger Name: KONTAKT IPA Plus | на замовлення 82 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-268 | AG TERMOPASTY | Category: Fluxes Description: Flux: rosin based; halide-free,No Clean,ROL0; resin; bucket Type of flux: rosin based Kind of flux: halide-free; No Clean; ROL0 Appearance: resin Kind of package: bucket Signal word: Warning Hazard statements: H317: May cause an allergic skin reaction. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ... GHS Code: GHS07 Flux residues: amber; yes Soldering equipment features: activated with adipic acid (2,5%) Net weight: 1kg | на замовлення 7 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-270 | AG TERMOPASTY | Category: Wipes & cleaning clothes Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free Version: single sided Length: 122mm Tip material: polyurethane Agent features: does not scratch surfaces; dust free Width of cleaning swab: 15.5mm Type of cleaning cloth: cleaning sticks Handle material: polypropylene Application: keybord cleaning swabs; precise cleaning operations Length of cleaning swab: 25mm Quantity in set/package: 20pcs. | на замовлення 5 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-272 | AG TERMOPASTY | Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Type of agent: soldering acid GHS Code: GHS05; GHS07 Application: for difficult to tin nickel surfaces Capacity: 0.5l Name: KWAS LUTOWNICZY Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. | на замовлення 7 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-293 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 7 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-294 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-296 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 12 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-297 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 12 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-298 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK Type of tape: heat transfer Width: 200mm Length: 0.4m Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-299 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 1 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-300 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 50 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-301 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK Type of tape: heat transfer Width: 200mm Length: 0.4m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 4 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-302 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 21 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-303 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glueless | на замовлення 50 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-305 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 66 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-306 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | на замовлення 62 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-307 | AG TERMOPASTY | Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 200mm Length: 0.4m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-309 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 800g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 0.8kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C | на замовлення 8 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-311 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 400g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H3 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 400g GHS Code: GHS09 Flash point: 350°C Density: 1.37g/cm3 @ 20°C | на замовлення 9 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-314 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Thermal conductivity: 1.5W/mK Dielectric strength: 14.4kV/mm Colour: white Mix ratio: 1:1 Operating temperature: -50...180°C Surface resistance: <22TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 Net weight: 1kg Bonding time: 70min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 20 | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-315 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Operating temperature: 50...180°C Surface resistance: <480TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 980mg/cm3 Net weight: 0.1kg Bonding time: 60min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Dielectric strength: 11kV/mm Colour: transparent Mix ratio: 3:2 | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-316 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Operating temperature: 50...180°C Surface resistance: <480TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 980mg/cm3 Net weight: 1kg Bonding time: 60min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Dielectric strength: 11kV/mm Colour: transparent Mix ratio: 3:2 | на замовлення 10 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-317 | AG TERMOPASTY | Category: Encapsulating materials Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Thermal conductivity: 1.5W/mK Dielectric strength: 14.4kV/mm Colour: white Mix ratio: 1:1 Operating temperature: -50...180°C Surface resistance: <22TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 Net weight: 0.1kg Bonding time: 70min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 20 | на замовлення 10 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-318 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 5kg Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: bucket Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 5kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART.AGT-323 | AG TERMOPASTY | Category: Fluxes Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13 Type of flux: rosin-free Kind of flux: Water Soluble Appearance: liquid Kind of package: bottle Capacity: 50ml Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel) Density: 1.27g/cm3 @ 20°C Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician. GHS Code: GHS05; GHS07 Conform to the norm: PN EN 29454 Manufacturer series: TS-81 Standard equipment: fine brush Related items: ZD-171 Flux name: SW13 Flux residues: corrosive; yes Soldering equipment features: corrosive Solids content: 10% | на замовлення 6 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-324 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g Type of agent: heat transfer paste Colour: grey Thermal conductivity: 15.2W/mK Kind of package: syringe Net weight: 1g Operating temperature: -20...130°C Agent application: heatsinks Appearance: paste GHS Code: GHS09 Application: facilitates heat transfer Name: CARBON Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Hazard statements: H411: Toxic to aquatic life with long lasting effects | на замовлення 27 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-325 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g Type of agent: heat transfer paste Colour: grey Thermal conductivity: 15.2W/mK Kind of package: syringe Net weight: 3g Operating temperature: -20...130°C Agent application: heatsinks Appearance: paste GHS Code: GHS09 Application: facilitates heat transfer Name: CARBON Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Hazard statements: H411: Toxic to aquatic life with long lasting effects | на замовлення 13 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-326 | AG TERMOPASTY | Category: Materials for PCB production Description: Agent: developer; blister,plastic container; Signal word: Danger Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ... Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation. Type of agent: developer Net weight: 110g Kind of package: blister; plastic container Agent application: for photoresists; PCBs GHS Code: GHS05; GHS07 Signal word: Danger | на замовлення 11 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-327 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Hazard statements: H411: Toxic to aquatic life with long lasting effects Operating temperature: -50...250°C Type of agent: heat transfer paste Agent features: silicon based Dielectric constant: 5 Net weight: 0.5kg Thermal conductivity: 1.5W/mK Kind of package: cartridge Agent application: heatsinks Appearance: paste GHS Code: GHS09 Application: facilitates heat transfer Signal word: Warning Name: PASTA HP Resistance to: temperature | на замовлення 1 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART.AGT-328 | AG TERMOPASTY | Category: Heat conductive compounds Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g Type of agent: heat transfer paste Agent features: silicon based Thermal conductivity: 2.8W/mK Kind of package: cartridge Net weight: 0.5kg Operating temperature: -50...250°C Dielectric constant: 5.1 Agent application: heatsinks Appearance: paste GHS Code: GHS09 Application: facilitates heat transfer Signal word: Warning Name: PASTA HPX Resistance to: temperature Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Hazard statements: H410: Very toxic to aquatic life with long lasting effects. | на замовлення 3 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART013Y12 | на замовлення 100 шт: термін постачання 14-28 дні (днів) | В кошику од. на суму грн. | ||||||||||
| ART016002E29-YLY-R | import | LCD character display 16x2 chars, size 80.0x36.0x14.0mm viewing area 64.2x16.2mm backlight color green, grey chars, Russian font O LCS162-9zsr; S6A0069 driver O LCS162-9zsr кількість в упаковці: 2 шт | на замовлення 102 шт: термін постачання 28-31 дні (днів) |
| ||||||||
| ART03 | ARI International Corporation | Description: HEATSINK PAD 300 X 215 X 0.3MM | товару немає в наявності | Мінімальне замовлення: 100 шт В кошику од. на суму грн. | ||||||||
| ART03FTD1653A | Viking Tech | Description: RES 165K OHM 1.00% 3/20W 0603 Power (Watts): 0.15W Tolerance: ±1% Features: Anti-Sulfur, Automotive AEC-Q200 Packaging: Tape & Reel (TR) Package / Case: 0603 (1608 Metric) Temperature Coefficient: ±50ppm/°C Size / Dimension: 0.061" L x 0.031" W (1.55mm x 0.80mm) Composition: Thin Film Operating Temperature: -55°C ~ 175°C Ratings: AEC-Q200 Number of Terminations: 2 Supplier Device Package: 0603 Height - Seated (Max): 0.022" (0.55mm) Resistance: 165 kOhms | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART05 | ARI International Corporation | Description: HEATSINK PAD 300 X 215 X 0.5MM | товару немає в наявності | Мінімальне замовлення: 100 шт В кошику од. на суму грн. | ||||||||
| ART05DTD1430A | Viking Tech | Description: RES 143 OHM 0.50% 1/5W 0805 Power (Watts): 0.2W, 1/5W Tolerance: ±0.5% Features: Anti-Sulfur, Automotive AEC-Q200 Packaging: Tape & Reel (TR) Package / Case: 0805 (2012 Metric) Temperature Coefficient: ±50ppm/°C Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm) Composition: Thin Film Operating Temperature: -55°C ~ 175°C Ratings: AEC-Q200 Number of Terminations: 2 Supplier Device Package: 0805 Height - Seated (Max): 0.026" (0.65mm) Resistance: 143 Ohms | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART05DTD1431A | Viking Tech | Description: RES 1.43K OHM 0.50% 1/5W 0805 Power (Watts): 0.2W, 1/5W Tolerance: ±0.5% Features: Anti-Sulfur, Automotive AEC-Q200 Packaging: Tape & Reel (TR) Package / Case: 0805 (2012 Metric) Temperature Coefficient: ±50ppm/°C Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm) Composition: Thin Film Operating Temperature: -55°C ~ 175°C Ratings: AEC-Q200 Number of Terminations: 2 Supplier Device Package: 0805 Height - Seated (Max): 0.026" (0.65mm) Resistance: 1.43 kOhms | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART05DTD1432A | Viking Tech | Description: RES 14.3K OHM 0.50% 1/5W 0805 Power (Watts): 0.2W, 1/5W Tolerance: ±0.5% Features: Anti-Sulfur, Automotive AEC-Q200 Packaging: Tape & Reel (TR) Package / Case: 0805 (2012 Metric) Temperature Coefficient: ±50ppm/°C Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm) Composition: Thin Film Operating Temperature: -55°C ~ 175°C Ratings: AEC-Q200 Number of Terminations: 2 Supplier Device Package: 0805 Height - Seated (Max): 0.026" (0.65mm) Resistance: 14.3 kOhms | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART10 | ARI International Corporation | Description: HEATSINK PAD 300 X 215 X 1.0MM | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART10270 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86mmx54mmx800um; 13.56MHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 13.56MHz | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART10274 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86x54x0.8mm; 13.56MHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 13.56MHz | на замовлення 29 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART10499 | ELATEC | Category: Accessories for Communication Modules Description: Holder; 64x49.2x37.27mm Type of communications modules accessories: holder Dimensions: 64x49.2x37.27mm Related items: HHRM-NB2B00 | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART11595 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86x54x0.8mm; 13.56MHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 13.56MHz | на замовлення 4 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART11861 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86x54x0.8mm; 125kHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 125kHz | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART12821 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86x54x0.8mm; 13.56MHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 13.56MHz | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART13530 | ELATEC | Category: RFID modules and readers Description: RFID pendant; Transponder: Mifare Classic; plastic; grey; 125kHz Type of communications module: RFID pendant Kind of transponder: Mifare Classic Frequency: 125kHz Enclosure material: plastic ISO standard: ISO 14443; ISO 15693 Body colour: grey | на замовлення 100 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART13604 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86mmx54mmx800um; 125kHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 125kHz | на замовлення 114 шт: термін постачання 14-30 дні (днів) |
| ||||||||
| ART14062 | ELATEC | Category: RFID modules and readers Description: RFID Card; 86x54x0.8mm; 13.56MHz; -25÷65°C; ISO: ISO 7816 Type of communications module: RFID Card Operating temperature: -25...65°C ISO standard: ISO 7816 Dimensions: 86x54x0.8mm Frequency: 13.56MHz | товару немає в наявності | В кошику од. на суму грн. | ||||||||
| ART15 | ARI International Corporation | Description: HEATSINK PAD 300 X 215 X 1.5MM | товару немає в наявності | Мінімальне замовлення: 100 шт В кошику од. на суму грн. | ||||||||
| ART15-DR-01 | Amphenol AIRMAR | Speakers & Transducers ART15 Airducer Ultrasonic Transducer | на замовлення 3 шт: термін постачання 21-30 дні (днів) | В кошику од. на суму грн. | ||||||||
| ART150FEU | Ampleon USA Inc. | Description: RF MOSFET LDMOS 65V SOT467C Packaging: Tray Package / Case: SOT-467C Current Rating (Amps): 1.2µA Mounting Type: Chassis Mount Frequency: 1MHz ~ 650MHz Power - Output: 150W Gain: 31dB Technology: LDMOS Supplier Device Package: SOT467C Voltage - Rated: 200 V Voltage - Test: 65 V Current - Test: 20 mA | на замовлення 51 шт: термін постачання 21-31 дні (днів) |
| ||||||||
| ART150PEGXY | Ampleon USA Inc. | Description: RF MOSFET LDMOS 65V TO270 Packaging: Tape & Reel (TR) Package / Case: TO-270BA Current Rating (Amps): 1.4µA Mounting Type: Surface Mount Frequency: 1MHz ~ 650MHz Configuration: N-Channel Power - Output: 150W Gain: 31.2dB Technology: LDMOS Supplier Device Package: TO-270-2G-1 Part Status: Active Voltage - Rated: 200 V Voltage - Test: 65 V Current - Test: 500 mA | товару немає в наявності | Мінімальне замовлення: 100 шт В кошику од. на суму грн. | ||||||||
| ART150PEGXY | Ampleon USA Inc. | Description: RF MOSFET LDMOS 65V TO270 Packaging: Cut Tape (CT) Package / Case: TO-270BA Current Rating (Amps): 1.4µA Mounting Type: Surface Mount Frequency: 1MHz ~ 650MHz Configuration: N-Channel Power - Output: 150W Gain: 31.2dB Technology: LDMOS Supplier Device Package: TO-270-2G-1 Part Status: Active Voltage - Rated: 200 V Voltage - Test: 65 V Current - Test: 500 mA | на замовлення 63 шт: термін постачання 21-31 дні (днів) |
| ||||||||
| ART150PEGXY | Ampleon | RF MOSFET Transistors ART150PEG/REEL | на замовлення 135 шт: термін постачання 21-30 дні (днів) | В кошику од. на суму грн. |